Benchmark #17600 - pibenchmarks.com

Brand: Netac SD (SDXXX)
C10 V10 U1
#56 / 1,701
335
#1,419 / 1,701
#265 / 405
1,045
	Amazon.com AliExpress Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.fr Amazon.it Amazon.sg

Overview
2020-04-13 08:51:09
#17,600
716
-329 (-45.95%)
Anonymous
sd32g

Secure Digital (SD) Card Details
Netac SD (SDXXX)
C10 V10 U1
29.2G
SD
Netac
SD16G
SD
5.00
0xff
0.0
09/2019
Class 10
None
U1
V10

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Debian GNU/Linux 10 (buster)
aarch64

Benchmark Results
16 MB/s
42.17 MB/s
42.55 MB/s
455 IOPS
1,884 IOPS
1,822 KB/s
7,538 KB/s
7,474 KB/s
2,264 KB/s
5,522 KB/s
1,139 KB/s

inxi Results
System: Host: itcommander Kernel: 4.19.88-OPENFANS+20191229-v8 aarch64 bits: 64 compiler: gcc v: 9.1.0 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=71936375-02 rootfstype=ext4 elevator=deadline fsck.repair=yes net.ifnames=0 cgroup_enable=1 cgroup_memory=1 cgroup_enable=cpuset cgroup_enable=memory swapaccount=1 zswap.enabled=1 zswap.zpool=z3fold zswap.compressor=lz4 zswap.max_pool_percent=25 rootwait Console: N/A dm: N/A Distro: Debian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: a03111 Memory: RAM: total: 979.3 MiB used: 191.5 MiB (19.6%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv8 v8l variant: cortex-a72 bits: 64 type: MCP arch: v8l family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: N/A tty: 128x67 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.88-OPENFANS+20191229-v8 Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::6ab:f626:559:9df7/64 scope: link IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: No WAN IP data found. Connected to the web? SSL issues? Drives: Local Storage: total: 88.07 GiB used: 5.94 GiB (6.7%) ID-1: /dev/mmcblk0 model: SD16G size: 29.48 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Netac model: OnlyDisk size: 58.59 GiB block size: physical: 512 B logical: 512 B rev: 1.00 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.23 GiB size: 28.72 GiB (98.25%) used: 5.88 GiB (20.5%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: ROOTFS uuid: e9d47927-3179-44a4-9346-4294a9e2f84f ID-2: /boot raw size: 252.0 MiB size: 251.7 MiB (99.89%) used: 68.1 MiB (27.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: BOOT uuid: 8E32-4CE6 Unmounted: ID-1: /dev/sda1 size: 252.0 MiB fs: vfat label: BOOT uuid: 8E32-4CE6 ID-2: /dev/sda2 size: 58.34 GiB fs: ext4 label: ROOTFS uuid: e9d47927-3179-44a4-9346-4294a9e2f84f USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: Netac type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 0dd8:3d01 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://mirrors.tuna.tsinghua.edu.cn/debian/ buster main non-free contrib 2: deb http://mirrors.tuna.tsinghua.edu.cn/debian-security buster/updates main 3: deb http://mirrors.tuna.tsinghua.edu.cn/debian/ buster-updates main non-free contrib 4: deb http://mirrors.tuna.tsinghua.edu.cn/debian/ buster-backports main non-free contrib No active apt repos in: /etc/apt/sources.list.d/rpi.list No active apt repos in: /etc/apt/sources.list.d/sid.list Processes: CPU top: 5 1: cpu: 2.1% command: init pid: 1 mem: 9.59 MiB (0.9%) 2: cpu: 0.6% command: systemd-udevd pid: 198 mem: 4.92 MiB (0.5%) 3: cpu: 0.3% command: libvirtd pid: 459 mem: 25.0 MiB (2.5%) 4: cpu: 0.2% command: systemd-journald pid: 151 mem: 6.86 MiB (0.7%) 5: cpu: 0.2% command: dbus-daemon pid: 352 mem: 3.87 MiB (0.4%) Memory top: 5 1: mem: 25.0 MiB (2.5%) command: libvirtd pid: 459 cpu: 0.3% 2: mem: 13.2 MiB (1.3%) command: udisksd pid: 327 cpu: 0.1% 3: mem: 9.59 MiB (0.9%) command: init pid: 1 cpu: 2.1% 4: mem: 9.17 MiB (0.9%) command: modemmanager pid: 360 cpu: 0.1% 5: mem: 8.12 MiB (0.8%) command: systemd pid: 903 cpu: 0.0% Info: Processes: 150 Uptime: 4m Init: systemd v: 241 runlevel: 5 Compilers: gcc: N/A Shell: Storage.sh (sudo) inxi: 3.0.38

inxi Results

System:    Host: itcommander Kernel: 4.19.88-OPENFANS+20191229-v8 aarch64 bits: 64 compiler: gcc v: 9.1.0 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 
           bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=71936375-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes net.ifnames=0 cgroup_enable=1 cgroup_memory=1 
           cgroup_enable=cpuset cgroup_enable=memory swapaccount=1 zswap.enabled=1 zswap.zpool=z3fold zswap.compressor=lz4 
           zswap.max_pool_percent=25 rootwait 
           Console: N/A dm: N/A Distro: Debian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: a03111 
Memory:    RAM: total: 979.3 MiB used: 191.5 MiB (19.6%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv8 v8l variant: cortex-a72 bits: 64 type: MCP arch: v8l family: 8 model-id: N/A 
           stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 status: Vulnerable 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: N/A tty: 128x67 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.88-OPENFANS+20191229-v8 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: fe80::6ab:f626:559:9df7/64 scope: link 
           IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX 
           WAN IP: No WAN IP data found. Connected to the web? SSL issues? 
Drives:    Local Storage: total: 88.07 GiB used: 5.94 GiB (6.7%) 
           ID-1: /dev/mmcblk0 model: SD16G size: 29.48 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Netac model: OnlyDisk size: 58.59 GiB block size: physical: 512 B logical: 512 B 
           rev: 1.00 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.23 GiB size: 28.72 GiB (98.25%) used: 5.88 GiB (20.5%) fs: ext4 block size: 4096 B 
           dev: /dev/mmcblk0p2 label: ROOTFS uuid: e9d47927-3179-44a4-9346-4294a9e2f84f 
           ID-2: /boot raw size: 252.0 MiB size: 251.7 MiB (99.89%) used: 68.1 MiB (27.1%) fs: vfat block size: 512 B 
           dev: /dev/mmcblk0p1 label: BOOT uuid: 8E32-4CE6 
Unmounted: ID-1: /dev/sda1 size: 252.0 MiB fs: vfat label: BOOT uuid: 8E32-4CE6 
           ID-2: /dev/sda2 size: 58.34 GiB fs: ext4 label: ROOTFS uuid: e9d47927-3179-44a4-9346-4294a9e2f84f 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: Netac type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s 
           chip ID: 0dd8:3d01 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://mirrors.tuna.tsinghua.edu.cn/debian/ buster main non-free contrib
           2: deb http://mirrors.tuna.tsinghua.edu.cn/debian-security buster/updates main
           3: deb http://mirrors.tuna.tsinghua.edu.cn/debian/ buster-updates main non-free contrib
           4: deb http://mirrors.tuna.tsinghua.edu.cn/debian/ buster-backports main non-free contrib
           No active apt repos in: /etc/apt/sources.list.d/rpi.list 
           No active apt repos in: /etc/apt/sources.list.d/sid.list 
Processes: CPU top: 5 
           1: cpu: 2.1% command: init pid: 1 mem: 9.59 MiB (0.9%) 
           2: cpu: 0.6% command: systemd-udevd pid: 198 mem: 4.92 MiB (0.5%) 
           3: cpu: 0.3% command: libvirtd pid: 459 mem: 25.0 MiB (2.5%) 
           4: cpu: 0.2% command: systemd-journald pid: 151 mem: 6.86 MiB (0.7%) 
           5: cpu: 0.2% command: dbus-daemon pid: 352 mem: 3.87 MiB (0.4%) 
           Memory top: 5 
           1: mem: 25.0 MiB (2.5%) command: libvirtd pid: 459 cpu: 0.3% 
           2: mem: 13.2 MiB (1.3%) command: udisksd pid: 327 cpu: 0.1% 
           3: mem: 9.59 MiB (0.9%) command: init pid: 1 cpu: 2.1% 
           4: mem: 9.17 MiB (0.9%) command: modemmanager pid: 360 cpu: 0.1% 
           5: mem: 8.12 MiB (0.8%) command: systemd pid: 903 cpu: 0.0% 
Info:      Processes: 150 Uptime: 4m Init: systemd v: 241 runlevel: 5 Compilers: gcc: N/A Shell: Storage.sh (sudo) 
           inxi: 3.0.38

Benchmark #17600 - Brand: Netac SD (SDXXX)