Benchmark #17641 - pibenchmarks.com

Brand: SanDisk SD Ultra A1 (SL32G)
A1 C10 V10 U1
#66 / 1,701
305
#1,361 / 1,701
#224 / 405
1,153
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-13 11:13:29
#17,641
1,110
-43 (-3.87%)
Anonymous
samsung 32 go on pi4

Secure Digital (SD) Card Details
SanDisk SD Ultra A1 (SL32G)
A1 C10 V10 U1
29.5G
SD
SanDisk
SL32G
SDHC
5.00
0x03
SD
8.0
06/2017
Class 10
A1
U1
V10

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
15.1 MB/s
40.4 MB/s
37.2 MB/s
864 IOPS
3,159 IOPS
3,456 KB/s
12,636 KB/s
9,972 KB/s
3,443 KB/s
8,847 KB/s
2,566 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 356.5 MiB (9.0%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link WAN IP: Drives: Local Storage: total: 29.72 GiB used: 2.17 GiB (7.3%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.47 GiB size: 28.98 GiB (98.35%) used: 2.12 GiB (7.3%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.1:3 info: Arduino SA Mega 2560 R3 (CDC ACM) type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 1.1 speed: 12 Mb/s chip ID: 2341:0042 Device-2: 1-1.3:4 info: N/A type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1997:2433 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/grafana.list 1: deb https: //dl.bintray.com/fg2it/deb stretch main Active apt repos in: /etc/apt/sources.list.d/influxdb.list 1: deb https: //repos.influxdata.com/debian jessie stable Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb https: //deb.nodesource.com/node_10.x buster main 2: deb-src https: //deb.nodesource.com/node_10.x buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 2.3% command: influxd pid: 4851 mem: 108.0 MiB (2.7%) 2: cpu: 0.2% command: domoticz pid: 596 mem: 36.8 MiB (0.9%) 3: cpu: 0.1% command: grafana-server pid: 2368 mem: 29.3 MiB (0.7%) 4: cpu: 0.1% command: sshd: pid: 13102 mem: 6.08 MiB (0.1%) 5: cpu: 0.1% command: -bash pid: 13129 mem: 3.61 MiB (0.0%) Memory top: 5 1: mem: 108.0 MiB (2.7%) command: influxd pid: 4851 cpu: 2.3% 2: mem: 36.8 MiB (0.9%) command: domoticz pid: 596 cpu: 0.2% 3: mem: 29.3 MiB (0.7%) command: grafana-server pid: 2368 cpu: 0.1% 4: mem: 11.3 MiB (0.2%) command: systemd-journald pid: 114 cpu: 0.0% 5: mem: 8.04 MiB (0.2%) command: init pid: 1 cpu: 0.0% Info: Processes: 138 Uptime: 7d 2h 55m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 356.5 MiB (9.0%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 80x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 29.72 GiB used: 2.17 GiB (7.3%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL32G size: 29.72 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.47 GiB size: 28.98 GiB (98.35%) used: 2.12 GiB (7.3%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.1:3 info: Arduino SA Mega 2560 R3 (CDC ACM) 
           type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 1.1 speed: 12 Mb/s 
           chip ID: 2341:0042 Device-2: 1-1.3:4 info: N/A type: Keyboard,Mouse driver: hid-generic,usbhid 
           interfaces: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1997:2433 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/grafana.list 
           1: deb https: //dl.bintray.com/fg2it/deb stretch main
           Active apt repos in: /etc/apt/sources.list.d/influxdb.list 
           1: deb https: //repos.influxdata.com/debian jessie stable
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb https: //deb.nodesource.com/node_10.x buster main
           2: deb-src https: //deb.nodesource.com/node_10.x buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 2.3% command: influxd pid: 4851 mem: 108.0 MiB (2.7%) 
           2: cpu: 0.2% command: domoticz pid: 596 mem: 36.8 MiB (0.9%) 
           3: cpu: 0.1% command: grafana-server pid: 2368 mem: 29.3 MiB (0.7%) 
           4: cpu: 0.1% command: sshd: pid: 13102 mem: 6.08 MiB (0.1%) 
           5: cpu: 0.1% command: -bash pid: 13129 mem: 3.61 MiB (0.0%) 
           Memory top: 5 
           1: mem: 108.0 MiB (2.7%) command: influxd pid: 4851 cpu: 2.3% 
           2: mem: 36.8 MiB (0.9%) command: domoticz pid: 596 cpu: 0.2% 
           3: mem: 29.3 MiB (0.7%) command: grafana-server pid: 2368 cpu: 0.1% 
           4: mem: 11.3 MiB (0.2%) command: systemd-journald pid: 114 cpu: 0.0% 
           5: mem: 8.04 MiB (0.2%) command: init pid: 1 cpu: 0.0% 
Info:      Processes: 138 Uptime: 7d 2h 55m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #17641 - Brand: SanDisk SD Ultra A1 (SL32G)