Benchmark #17663 - pibenchmarks.com

Brand: Undentified JMicron USB to SATA Adapter
SSD (2.5" SATA)
#12 / 1,679
921
#426 / 1,679
#411 / 984
#52 / 370
7,539
	Amazon.com AliExpress

Overview
2020-04-13 12:09:06
#17,663
2,789
-4,750 (-170.31%)
tigroz
Transcend TS128GMTE110S on Pi 3+ ORICO Alluminio M.2 NVMe SSD Enclosure

Storage Details
Undentified JMicron USB to SATA Adapter
SSD (2.5" SATA)
119.2G
SSD
JMicron
JMicronGeneric
2.00
480
152d:0583
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x0583 (Digital Camera)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
1,400
400
450 (-50)

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
31.9 MB/s
28.48 MB/s
27.81 MB/s
3,715 IOPS
2,749 IOPS
14,862 KB/s
10,998 KB/s
13,542 KB/s
12,499 KB/s
11,456 KB/s
12,724 KB/s

inxi Results
System: Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=bfcb1e77-02 rootfstype=ext4 cgroup_enable=cpuset cgroup_enable=memory swapaccount=1 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Memory: RAM: total: 991.6 MiB used: 270.9 MiB (27.3%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 115x33 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7+ Network: Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:5 chip ID: 0424:7800 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-1: br-d3ec49d72470 state: down mac: IP v4: scope: global broadcast: IF-ID-2: docker0 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-3: vethc15be12 state: up speed: 10000 Mbps duplex: full mac: IF-ID-4: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 119.24 GiB used: 4.47 GiB (3.7%) ID-1: /dev/sda type: USB vendor: JMicron Tech model: Generic size: 119.24 GiB block size: physical: 512 B logical: 512 B rev: 2102 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 119.18 GiB size: 111.95 GiB (93.93%) used: 2.21 GiB (2.0%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: root uuid: c5a42f10-e310-4d27-a837-3d13ce090f17 ID-2: /boot raw size: 64.0 MiB size: 63.9 MiB (99.78%) used: 52.4 MiB (82.0%) fs: vfat block size: 512 B dev: /dev/sda1 label: HypriotOS uuid: 51AB-0DD7 ID-3: /var/lib/docker/overlay2/b74d0e60664b4d731a7f92613c587fb34e2e05c4ce80b954399d07b552427fdd/merged raw size: N/A size: 111.95 GiB used: 2.21 GiB (2.0%) fs: overlay source: ERR-102 label: N/A uuid: N/A Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 Device-2: 1-1.1.3:4 info: JMicron / JMicron USA type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 152d:0583 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspberrypi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 7.1% command: [kworker/2:1+events_freezable] pid: 5479 mem: 0.00 MiB (0.0%) 2: cpu: 5.2% command: [kworker/2:0-mm_percpu_wq] pid: 5423 mem: 0.00 MiB (0.0%) 3: cpu: 0.5% command: -bash pid: 5538 mem: 4.58 MiB (0.4%) 4: cpu: 0.3% command: sshd: pid: 5511 mem: 6.12 MiB (0.6%) 5: cpu: 0.3% command: sshd: pid: 5535 mem: 3.46 MiB (0.3%) Memory top: 5 1: mem: 61.2 MiB (6.2%) command: tvheadend pid: 417 cpu: 0.0% 2: mem: 60.1 MiB (6.1%) command: dockerd pid: 3275 cpu: 0.1% 3: mem: 26.9 MiB (2.7%) command: containerd pid: 360 cpu: 0.0% 4: mem: 23.7 MiB (2.4%) command: tvhproxy.py started by: python pid: 10005 cpu: 0.0% 5: mem: 17.1 MiB (1.7%) command: /portainer pid: 3481 cpu: 0.0% Info: Processes: 124 Uptime: 32d 10h 34m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=640 
           bcm2708_fb.fbheight=480 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=PARTUUID=bfcb1e77-02 rootfstype=ext4 cgroup_enable=cpuset cgroup_enable=memory 
           swapaccount=1 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 
           rev: a020d3 Memory:    RAM: total: 991.6 MiB used: 270.9 MiB (27.3%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 
           Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 
           4: 1400 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 115x33 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7+ 
Network:   Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:5 
           chip ID: 0424:7800 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-1: br-d3ec49d72470 state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-2: docker0 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-3: vethc15be12 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-4: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 119.24 GiB used: 4.47 GiB (3.7%) 
           ID-1: /dev/sda type: USB vendor: JMicron Tech model: Generic size: 119.24 GiB 
           block size: physical: 512 B logical: 512 B rev: 2102 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 119.18 GiB size: 111.95 GiB (93.93%) used: 2.21 GiB (2.0%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: root 
           uuid: c5a42f10-e310-4d27-a837-3d13ce090f17 
           ID-2: /boot raw size: 64.0 MiB size: 63.9 MiB (99.78%) used: 52.4 MiB (82.0%) fs: vfat 
           block size: 512 B dev: /dev/sda1 label: HypriotOS uuid: 51AB-0DD7 
           ID-3: /var/lib/docker/overlay2/b74d0e60664b4d731a7f92613c587fb34e2e05c4ce80b954399d07b552427fdd/merged raw size: N/A size: 111.95 GiB used: 2.21 GiB (2.0%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 
           Device-2: 1-1.1.3:4 info: JMicron / JMicron USA type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 152d:0583 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspberrypi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 7.1% command: [kworker/2:1+events_freezable] pid: 5479 mem: 0.00 MiB (0.0%) 
           2: cpu: 5.2% command: [kworker/2:0-mm_percpu_wq] pid: 5423 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.5% command: -bash pid: 5538 mem: 4.58 MiB (0.4%) 
           4: cpu: 0.3% command: sshd: pid: 5511 mem: 6.12 MiB (0.6%) 
           5: cpu: 0.3% command: sshd: pid: 5535 mem: 3.46 MiB (0.3%) 
           Memory top: 5 
           1: mem: 61.2 MiB (6.2%) command: tvheadend pid: 417 cpu: 0.0% 
           2: mem: 60.1 MiB (6.1%) command: dockerd pid: 3275 cpu: 0.1% 
           3: mem: 26.9 MiB (2.7%) command: containerd pid: 360 cpu: 0.0% 
           4: mem: 23.7 MiB (2.4%) command: tvhproxy.py started by: python pid: 10005 cpu: 0.0% 
           5: mem: 17.1 MiB (1.7%) command: /portainer pid: 3481 cpu: 0.0% 
Info:      Processes: 124 Uptime: 32d 10h 34m Init: systemd v: 241 runlevel: 5 Compilers: 
           gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #17663 - Brand: Undentified JMicron USB to SATA Adapter