Benchmark #17905 - pibenchmarks.com

Brand: Lexar USB Flash Drive
USB Flash
#254 / 1,700
65
#1,268 / 1,700
#24 / 94
#25 / 89
1,334
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.com.au Amazon.de Amazon.es Amazon.pl Amazon.sg

Overview
2020-04-14 02:19:12
#17,905
412
-922 (-223.79%)
Anonymous

Storage Details
Lexar USB Flash Drive
USB Flash
29.8G
USB Flash
Lexar
USBFlashDrive
0xcffb; Revision: 0x15b4
2.10
480
05dc:a83a
0x05dc (Lexar Media, Inc.)
0xa83a
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 2B 1.1
Raspberry Pi 2 Model B Rev 1.1
Raspberry Pi Foundation
900
250
450 (+50)

Operating System

Raspbian GNU/Linux 9 (stretch)
armv7l

Benchmark Results
4.3 MB/s
26.44 MB/s
26.51 MB/s
123 IOPS
862 IOPS
492 KB/s
3,449 KB/s
9,457 KB/s
3,939 KB/s
3,682 KB/s
438 KB/s

inxi Results
System: Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=tty1 root=PARTUUID=5F4DDC4A-BBB3-4867-A42D-D462422CD4C5 rootdelay=5 rootfstype=ext4 elevator=deadline rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) Machine: Type: ARM Device System: Raspberry Pi 2 Model B Rev 1.1 details: BCM2835 rev: a01041 Memory: RAM: total: 991.6 MiB used: 501.7 MiB (50.6%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a7 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 5 microcode: N/A bogomips: 230 Speed: 900 MHz min/max: 600/900 MHz Core speeds (MHz): 1: 900 2: 900 3: 900 4: 900 Features: edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.19.2 driver: fbturbo tty: 185x87 Message: Advanced graphics data unavailable in console for root. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.66-v7+ Network: Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: type: mngtmpaddr dynamic scope: global IP v6: scope: link IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: veth2c523ec state: up speed: 10000 Mbps duplex: full mac: IF-ID-3: vethaab2865 state: up speed: 10000 Mbps duplex: full mac: IF-ID-4: vethc344dfb state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: vethd1d3c86 state: up speed: 10000 Mbps duplex: full mac: WAN IP: Drives: Local Storage: total: 137.33 GiB used: 23.05 GiB (16.8%) ID-1: /dev/mmcblk0 model: USD size: 7.51 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Lexar model: USB Flash Drive size: 29.81 GiB block size: physical: 512 B logical: 512 B rev: 1100 scheme: GPT SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? ID-3: /dev/sdb model: FILEIO size: 100.00 GiB block size: physical: 512 B logical: 512 B N/A rev: 4.0 scheme: MBR SMART: no Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.81 GiB size: 29.22 GiB (98.01%) used: 7.92 GiB (27.1%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: rootfs uuid: 8980b032-f1c8-4b48-8cba-374d4f542686 ID-2: /boot raw size: 56.0 MiB size: 55.9 MiB (99.90%) used: 23.5 MiB (42.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 140A-14B7 ID-3: /mnt/iscsi raw size: 100.00 GiB size: 98.30 GiB (98.31%) used: 7.19 GiB (7.3%) fs: ext4 block size: 4096 B dev: /dev/sdb1 label: N/A uuid: 3686c4ad-2c42-4a47-8d91-86d472cb9df0 ID-4: /mnt/netgear raw size: N/A size: 5.42 TiB used: 2.28 TiB (42.1%) fs: nfs remote: 192.168.X.X:/media label: N/A uuid: N/A ID-5: /var/lib/docker/overlay2/4818a0e5d27caecba0b1e7440f301cf2d883432cd81004b4b3d6bbbee1699383/merged raw size: N/A size: 29.22 GiB used: 7.92 GiB (27.1%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-6: /var/lib/docker/overlay2/6706683f3248b9190cd7bcfb0db9abe95272628b6dad2775e503d0567e31bd38/merged raw size: N/A size: 29.22 GiB used: 7.92 GiB (27.1%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-7: /var/lib/docker/overlay2/ef62a0f4217eaa119b169e3e9418ce2f2e6f9aa78d83c7635c8feed22f359e5a/merged raw size: N/A size: 29.22 GiB used: 7.92 GiB (27.1%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-8: /var/lib/docker/overlay2/ffd93d064cea6763e0f165b9c401c9a084b448a7e7b559949449c2fe58a982fe/merged raw size: N/A size: 29.22 GiB used: 7.92 GiB (27.1%) fs: overlay source: ERR-102 label: N/A uuid: N/A Unmounted: ID-1: /dev/mmcblk0p2 size: 7.46 GiB fs: ext4 label: N/A uuid: f24a4949-f4b2-4cad-a780-a138695079ec USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 Device-2: 1-1.2:4 info: Lexar Media type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 05dc:a83a Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/deconz.list 1: deb http: //phoscon.de/apt/deconz stretch main Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian stretch edge Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ stretch main ui Active apt repos in: /etc/apt/sources.list.d/unstable.list 1: deb http: //deb.debian.org/debian/ unstable main Processes: CPU top: 5 1: cpu: 5.8% command: mono pid: 3492 mem: 70.6 MiB (7.2%) 2: cpu: 4.9% command: mysqld pid: 2025 mem: 96.5 MiB (9.8%) 3: cpu: 2.2% command: mono pid: 3451 mem: 115.5 MiB (11.8%) 4: cpu: 0.3% command: python pid: 1196 mem: 5.36 MiB (0.5%) 5: cpu: 0.1% command: dbus-daemon pid: 330 mem: 2.98 MiB (0.3%) Memory top: 5 1: mem: 115.5 MiB (11.8%) command: mono pid: 3451 cpu: 2.2% 2: mem: 96.5 MiB (9.8%) command: mysqld pid: 2025 cpu: 4.9% 3: mem: 70.6 MiB (7.2%) command: mono pid: 3492 cpu: 5.8% 4: mem: 31.4 MiB (3.2%) command: dockerd pid: 2096 cpu: 0.1% 5: mem: 23.0 MiB (2.3%) command: apache2 pid: 1102 cpu: 0.0% Info: Processes: 162 Uptime: 17h 27m Init: systemd v: 232 runlevel: 3 target: multi-user.target Compilers: gcc: 6.3.0 alt: 4.6/4.9/6 Client: shell wrapper v: 4.4.12-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 
           bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=tty1 
           root=PARTUUID=5F4DDC4A-BBB3-4867-A42D-D462422CD4C5 rootdelay=5 rootfstype=ext4 
           elevator=deadline rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) 
Machine:   Type: ARM Device System: Raspberry Pi 2 Model B Rev 1.1 details: BCM2835 rev: a01041 
           Memory:    RAM: total: 991.6 MiB used: 501.7 MiB (50.6%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a7 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 5 microcode: N/A bogomips: 230 
           Speed: 900 MHz min/max: 600/900 MHz Core speeds (MHz): 1: 900 2: 900 3: 900 4: 900 
           Features: edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 
           vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.19.2 driver: fbturbo tty: 185x87 
           Message: Advanced graphics data unavailable in console for root. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.66-v7+ 
Network:   Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB 
           driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  type: mngtmpaddr dynamic scope: global 
           IP v6:  scope: link 
           IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: veth2c523ec state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-3: vethaab2865 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-4: vethc344dfb state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: vethd1d3c86 state: up speed: 10000 Mbps duplex: full mac:  
           WAN IP:  
Drives:    Local Storage: total: 137.33 GiB used: 23.05 GiB (16.8%) 
           ID-1: /dev/mmcblk0 model: USD size: 7.51 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Lexar model: USB Flash Drive size: 29.81 GiB 
           block size: physical: 512 B logical: 512 B rev: 1100 scheme: GPT 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           ID-3: /dev/sdb model: FILEIO size: 100.00 GiB block size: physical: 512 B 
           logical: 512 B N/A rev: 4.0 scheme: MBR 
           SMART: no 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.81 GiB size: 29.22 GiB (98.01%) used: 7.92 GiB (27.1%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: rootfs 
           uuid: 8980b032-f1c8-4b48-8cba-374d4f542686 
           ID-2: /boot raw size: 56.0 MiB size: 55.9 MiB (99.90%) used: 23.5 MiB (42.1%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 140A-14B7 
           ID-3: /mnt/iscsi raw size: 100.00 GiB size: 98.30 GiB (98.31%) used: 7.19 GiB (7.3%) 
           fs: ext4 block size: 4096 B dev: /dev/sdb1 label: N/A 
           uuid: 3686c4ad-2c42-4a47-8d91-86d472cb9df0 
           ID-4: /mnt/netgear raw size: N/A size: 5.42 TiB used: 2.28 TiB (42.1%) fs: nfs 
           remote: 192.168.X.X:/media label: N/A uuid: N/A 
           ID-5: /var/lib/docker/overlay2/4818a0e5d27caecba0b1e7440f301cf2d883432cd81004b4b3d6bbbee1699383/merged raw size: N/A size: 29.22 GiB used: 7.92 GiB (27.1%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-6: /var/lib/docker/overlay2/6706683f3248b9190cd7bcfb0db9abe95272628b6dad2775e503d0567e31bd38/merged raw size: N/A size: 29.22 GiB used: 7.92 GiB (27.1%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-7: /var/lib/docker/overlay2/ef62a0f4217eaa119b169e3e9418ce2f2e6f9aa78d83c7635c8feed22f359e5a/merged raw size: N/A size: 29.22 GiB used: 7.92 GiB (27.1%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-8: /var/lib/docker/overlay2/ffd93d064cea6763e0f165b9c401c9a084b448a7e7b559949449c2fe58a982fe/merged raw size: N/A size: 29.22 GiB used: 7.92 GiB (27.1%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Unmounted: ID-1: /dev/mmcblk0p2 size: 7.46 GiB fs: ext4 label: N/A 
           uuid: f24a4949-f4b2-4cad-a780-a138695079ec 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:9514 
           Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter 
           type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:ec00 
           Device-2: 1-1.2:4 info: Lexar Media type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 05dc:a83a Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/deconz.list 
           1: deb http: //phoscon.de/apt/deconz stretch main
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian stretch edge
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ stretch main ui
           Active apt repos in: /etc/apt/sources.list.d/unstable.list 
           1: deb http: //deb.debian.org/debian/ unstable main
Processes: CPU top: 5 
           1: cpu: 5.8% command: mono pid: 3492 mem: 70.6 MiB (7.2%) 
           2: cpu: 4.9% command: mysqld pid: 2025 mem: 96.5 MiB (9.8%) 
           3: cpu: 2.2% command: mono pid: 3451 mem: 115.5 MiB (11.8%) 
           4: cpu: 0.3% command: python pid: 1196 mem: 5.36 MiB (0.5%) 
           5: cpu: 0.1% command: dbus-daemon pid: 330 mem: 2.98 MiB (0.3%) 
           Memory top: 5 
           1: mem: 115.5 MiB (11.8%) command: mono pid: 3451 cpu: 2.2% 
           2: mem: 96.5 MiB (9.8%) command: mysqld pid: 2025 cpu: 4.9% 
           3: mem: 70.6 MiB (7.2%) command: mono pid: 3492 cpu: 5.8% 
           4: mem: 31.4 MiB (3.2%) command: dockerd pid: 2096 cpu: 0.1% 
           5: mem: 23.0 MiB (2.3%) command: apache2 pid: 1102 cpu: 0.0% 
Info:      Processes: 162 Uptime: 17h 27m Init: systemd v: 232 runlevel: 3 
           target: multi-user.target Compilers: gcc: 6.3.0 alt: 4.6/4.9/6 Client: shell wrapper 
           v: 4.4.12-release inxi: 3.0.38

Benchmark #17905 - Brand: Lexar USB Flash Drive