Benchmark #17987 - pibenchmarks.com

Brand: Transcend (USDU1)
C10 V10 U1
#51 / 1,539
209
#1,263 / 1,539
#230 / 369
1,012
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-14 08:35:33
#17,987
833
-179 (-21.49%)
Anonymous
noob

Secure Digital (SD) Card Details
Transcend (USDU1)
C10 V10 U1
12.4G
SD
Transcend
USDU1
SDHC
5.00
0x74
J
2.0
09/2019
Class 10
None
U1
V10

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
15.4 MB/s
40.3 MB/s
40.51 MB/s
483 IOPS
2,610 IOPS
1,932 KB/s
10,442 KB/s
7,785 KB/s
1,874 KB/s
7,045 KB/s
1,488 KB/s

inxi Results
System: Kernel: 4.19.57-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:640x480@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 1 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.88 GiB used: 245.0 MiB (6.2%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.57-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: up mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 14.87 GiB used: 5.45 GiB (36.7%) ID-1: /dev/mmcblk0 model: USDU1 size: 14.87 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 12.38 GiB size: 12.06 GiB (97.41%) used: 5.41 GiB (44.9%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p7 label: root uuid: 00003230-6ba3-44e1-8945-d6e46e69ed68 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 39.0 MiB (15.5%) fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 1804-48A6 Unmounted: ID-1: /dev/mmcblk0p1 size: 2.20 GiB fs: vfat label: RECOVERY uuid: 3313-8D7E ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS uuid: cf21fc5e-8ad5-4539-a8a0-f5e5f48b2b56 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 1.2% command: java pid: 3039 mem: 93.6 MiB (2.3%) 2: cpu: 0.1% command: init pid: 1 mem: 8.02 MiB (0.2%) 3: cpu: 0.1% command: [kworker/u8:1-events_unbound] pid: 3506 mem: 0.00 MiB (0.0%) 4: cpu: 0.1% command: bash pid: 3563 mem: 2.71 MiB (0.0%) 5: cpu: 0.1% command: packagekitd pid: 3715 mem: 12.2 MiB (0.3%) Memory top: 5 1: mem: 93.6 MiB (2.3%) command: java pid: 3039 cpu: 1.2% 2: mem: 12.2 MiB (0.3%) command: packagekitd pid: 3715 cpu: 0.1% 3: mem: 8.02 MiB (0.2%) command: init pid: 1 cpu: 0.1% 4: mem: 7.81 MiB (0.1%) command: systemd-journald pid: 99 cpu: 0.0% 5: mem: 7.27 MiB (0.1%) command: systemd pid: 845 cpu: 0.0% Info: Processes: 123 Uptime: 51m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.57-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:640x480@60 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet 
           splash plymouth.ignore-serial-consoles 
           Console: tty 1 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.88 GiB used: 245.0 MiB (6.2%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 80x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.57-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 14.87 GiB used: 5.45 GiB (36.7%) 
           ID-1: /dev/mmcblk0 model: USDU1 size: 14.87 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 12.38 GiB size: 12.06 GiB (97.41%) used: 5.41 GiB (44.9%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p7 label: root 
           uuid: 00003230-6ba3-44e1-8945-d6e46e69ed68 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 39.0 MiB (15.5%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 1804-48A6 
Unmounted: ID-1: /dev/mmcblk0p1 size: 2.20 GiB fs: vfat label: RECOVERY uuid: 3313-8D7E 
           ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS 
           uuid: cf21fc5e-8ad5-4539-a8a0-f5e5f48b2b56 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 1.2% command: java pid: 3039 mem: 93.6 MiB (2.3%) 
           2: cpu: 0.1% command: init pid: 1 mem: 8.02 MiB (0.2%) 
           3: cpu: 0.1% command: [kworker/u8:1-events_unbound] pid: 3506 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.1% command: bash pid: 3563 mem: 2.71 MiB (0.0%) 
           5: cpu: 0.1% command: packagekitd pid: 3715 mem: 12.2 MiB (0.3%) 
           Memory top: 5 
           1: mem: 93.6 MiB (2.3%) command: java pid: 3039 cpu: 1.2% 
           2: mem: 12.2 MiB (0.3%) command: packagekitd pid: 3715 cpu: 0.1% 
           3: mem: 8.02 MiB (0.2%) command: init pid: 1 cpu: 0.1% 
           4: mem: 7.81 MiB (0.1%) command: systemd-journald pid: 99 cpu: 0.0% 
           5: mem: 7.27 MiB (0.1%) command: systemd pid: 845 cpu: 0.0% 
Info:      Processes: 123 Uptime: 51m Init: systemd v: 241 runlevel: 3 target: multi-user.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #17987 - Brand: Transcend (USDU1)