Benchmark #18124 - pibenchmarks.com

Brand: SanDisk SSD Plus
SSD (2.5" SATA)
#2 / 1,539
1,343
#572 / 1,539
#551 / 875
#173 / 363
5,919
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-14 21:13:18
#18,124
5,096
-823 (-16.15%)
Anonymous
Sandisk SDSSDA 120gb SDD on Pi 4 using DTech USB 3.0 to SATA adapter

Storage Details
SanDisk SSD Plus
SSD (2.5" SATA)
120G
SSD
SanDisk
SDSSDA120G
2.5 inch
SATA
3.00
5,000
1d6b:1562
0x1d6b (Linux Foundation)
0x1562
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
59 MB/s
252.8 MB/s
264.22 MB/s
5,937 IOPS
3,566 IOPS
23,751 KB/s
14,264 KB/s
28,943 KB/s
21,128 KB/s
16,918 KB/s
25,790 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 usb-storage.quirks=152d:1562:u dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=8eb3705f-01 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 598.0 MiB (15.0%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr tty: 195x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: br-62cc5b3dffc3 state: down mac: IP v4: scope: global broadcast: IF-ID-2: br-e5cbb586e955 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-3: docker0 state: down mac: IP v4: scope: global broadcast: IF-ID-4: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-5: veth37e1a2c state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: vethabcc187 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: vethb409430 state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: vethb4b995e state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: vethda8b2de state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: vethebe250c state: up speed: 10000 Mbps duplex: full mac: IF-ID-11: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 141.60 GiB used: 29.08 GiB (20.5%) ID-1: /dev/mmcblk0 model: EB1QT size: 29.81 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: IBM model: DTECH USB 3.0 TO SATA size: 111.79 GiB block size: physical: 512 B logical: 512 B rev: 0203 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 111.79 GiB size: 109.53 GiB (97.98%) used: 14.42 GiB (13.2%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: 77a0b774-ad1d-42f5-a863-988b8f656e12 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 01E2-0E04 ID-3: /media/pi/Storage raw size: 11.05 GiB size: 10.75 GiB (97.30%) used: 51.4 MiB (0.5%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p9 label: Storage uuid: ec2f2a99-b145-43c3-9105-f675cf047ac0 ID-4: /media/pi/System raw size: 512.0 MiB size: 511.7 MiB (99.95%) used: 144.0 MiB (28.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p8 label: System uuid: 39A8-185C ID-5: /var/lib/docker/overlay2/4ff73216cfdda5f8ee4d68b5aac345cef1788831465d2e3c1962ff3370d3fe67/merged raw size: N/A size: 109.53 GiB used: 14.42 GiB (13.2%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-6: /var/lib/docker/overlay2/793885c34ee6d5dff253f9233a30262170227a33039d5b985605eea47334502a/merged raw size: N/A size: 109.53 GiB used: 14.42 GiB (13.2%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-7: /var/lib/docker/overlay2/a42dc620e52a05d92324224a6145fb181c6627f8dae8f49116a7743fa25dbca2/merged raw size: N/A size: 109.53 GiB used: 14.42 GiB (13.2%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-8: /var/lib/docker/overlay2/bc593f6e566b58d48c974cc537e82efc3159fda7edf4ac2e317056305d43162f/merged raw size: N/A size: 109.53 GiB used: 14.42 GiB (13.2%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-9: /var/lib/docker/overlay2/c85b811299efbd7865efca3251f7dc02199013357df31172c4ec8ebc6e69ae6c/merged raw size: N/A size: 109.53 GiB used: 14.42 GiB (13.2%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-10: /var/lib/docker/overlay2/f446aed35ce963437fe7a0da629a2d51ea1fa885bd4dd088d685cea1cba9ffb2/merged raw size: N/A size: 109.53 GiB used: 14.42 GiB (13.2%) fs: overlay source: ERR-102 label: N/A uuid: N/A Unmounted: ID-1: /dev/mmcblk0p1 size: 2.20 GiB fs: vfat label: RECOVERY uuid: 9016-4EF8 ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS uuid: 124b3a9e-8ff9-4009-b574-a5ffb49942ae ID-4: /dev/mmcblk0p7 size: 15.78 GiB fs: ext4 label: root uuid: 4c59fca4-b89f-47f8-9c52-0be3840c37c4 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.4:3 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c52b Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-2:2 info: JMicron / JMicron USA type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:1562 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 98.4% command: pcmanfm pid: 943 mem: 20.7 MiB (0.5%) 2: cpu: 3.8% command: ruby pid: 1388 mem: 76.6 MiB (1.9%) 3: cpu: 2.6% command: init pid: 1 mem: 8.18 MiB (0.2%) 4: cpu: 1.0% command: dockerd pid: 470 mem: 63.4 MiB (1.6%) 5: cpu: 0.8% command: [usb-storage] pid: 78 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 76.6 MiB (1.9%) command: ruby pid: 1388 cpu: 3.8% 2: mem: 67.2 MiB (1.7%) command: mysqld pid: 1690 cpu: 0.3% 3: mem: 63.4 MiB (1.6%) command: dockerd pid: 470 cpu: 1.0% 4: mem: 61.1 MiB (1.5%) command: solaar started by: python pid: 973 cpu: 0.5% 5: mem: 47.0 MiB (1.2%) command: xorg pid: 554 cpu: 0.4% Info: Processes: 216 Uptime: 5m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 usb-storage.quirks=152d:1562:u dwc_otg.lpm_enable=0 
           console=ttyS0,115200 console=tty1 root=PARTUUID=8eb3705f-01 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles 
           Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 598.0 MiB (15.0%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr 
           tty: 195x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: br-62cc5b3dffc3 state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-2: br-e5cbb586e955 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-3: docker0 state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-4: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-5: veth37e1a2c state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: vethabcc187 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: vethb409430 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-8: vethb4b995e state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-9: vethda8b2de state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-10: vethebe250c state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-11: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 141.60 GiB used: 29.08 GiB (20.5%) 
           ID-1: /dev/mmcblk0 model: EB1QT size: 29.81 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: IBM model: DTECH USB 3.0 TO SATA size: 111.79 GiB 
           block size: physical: 512 B logical: 512 B rev: 0203 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 111.79 GiB size: 109.53 GiB (97.98%) used: 14.42 GiB (13.2%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: N/A uuid: 77a0b774-ad1d-42f5-a863-988b8f656e12 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 01E2-0E04 
           ID-3: /media/pi/Storage raw size: 11.05 GiB size: 10.75 GiB (97.30%) 
           used: 51.4 MiB (0.5%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p9 label: Storage 
           uuid: ec2f2a99-b145-43c3-9105-f675cf047ac0 
           ID-4: /media/pi/System raw size: 512.0 MiB size: 511.7 MiB (99.95%) 
           used: 144.0 MiB (28.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p8 label: System 
           uuid: 39A8-185C 
           ID-5: /var/lib/docker/overlay2/4ff73216cfdda5f8ee4d68b5aac345cef1788831465d2e3c1962ff3370d3fe67/merged raw size: N/A size: 109.53 GiB used: 14.42 GiB (13.2%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-6: /var/lib/docker/overlay2/793885c34ee6d5dff253f9233a30262170227a33039d5b985605eea47334502a/merged raw size: N/A size: 109.53 GiB used: 14.42 GiB (13.2%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-7: /var/lib/docker/overlay2/a42dc620e52a05d92324224a6145fb181c6627f8dae8f49116a7743fa25dbca2/merged raw size: N/A size: 109.53 GiB used: 14.42 GiB (13.2%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-8: /var/lib/docker/overlay2/bc593f6e566b58d48c974cc537e82efc3159fda7edf4ac2e317056305d43162f/merged raw size: N/A size: 109.53 GiB used: 14.42 GiB (13.2%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-9: /var/lib/docker/overlay2/c85b811299efbd7865efca3251f7dc02199013357df31172c4ec8ebc6e69ae6c/merged raw size: N/A size: 109.53 GiB used: 14.42 GiB (13.2%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-10: /var/lib/docker/overlay2/f446aed35ce963437fe7a0da629a2d51ea1fa885bd4dd088d685cea1cba9ffb2/merged raw size: N/A size: 109.53 GiB used: 14.42 GiB (13.2%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Unmounted: ID-1: /dev/mmcblk0p1 size: 2.20 GiB fs: vfat label: RECOVERY uuid: 9016-4EF8 
           ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS 
           uuid: 124b3a9e-8ff9-4009-b574-a5ffb49942ae 
           ID-4: /dev/mmcblk0p7 size: 15.78 GiB fs: ext4 label: root 
           uuid: 4c59fca4-b89f-47f8-9c52-0be3840c37c4 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.4:3 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID 
           driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s 
           chip ID: 046d:c52b 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-2: 2-2:2 info: JMicron / JMicron USA type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:1562 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 98.4% command: pcmanfm pid: 943 mem: 20.7 MiB (0.5%) 
           2: cpu: 3.8% command: ruby pid: 1388 mem: 76.6 MiB (1.9%) 
           3: cpu: 2.6% command: init pid: 1 mem: 8.18 MiB (0.2%) 
           4: cpu: 1.0% command: dockerd pid: 470 mem: 63.4 MiB (1.6%) 
           5: cpu: 0.8% command: [usb-storage] pid: 78 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 76.6 MiB (1.9%) command: ruby pid: 1388 cpu: 3.8% 
           2: mem: 67.2 MiB (1.7%) command: mysqld pid: 1690 cpu: 0.3% 
           3: mem: 63.4 MiB (1.6%) command: dockerd pid: 470 cpu: 1.0% 
           4: mem: 61.1 MiB (1.5%) command: solaar started by: python pid: 973 cpu: 0.5% 
           5: mem: 47.0 MiB (1.2%) command: xorg pid: 554 cpu: 0.4% 
Info:      Processes: 216 Uptime: 5m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #18124 - Brand: SanDisk SSD Plus