Benchmark #18182 - pibenchmarks.com

Brand: Toshiba Canvio 2.5" MK Series
HDD (2.5" SATA)
#203 / 1,539
50
#1,205 / 1,539
#53 / 66
#15 / 20
1,108
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-15 03:31:33
#18,182
711
-397 (-55.84%)
ghislainolitec
HHD Usb2 Pi3

Storage Details
Toshiba Canvio 2.5" MK Series
HDD (2.5" SATA)
500G
HDD
Toshiba
MK5055GSXN
SATA
2.00
480
174c:5106
0x174c (ASMedia Technology Inc.)
0x5106
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
1,400
400
450 (-50)

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
33.4 MB/s
27.44 MB/s
27.73 MB/s
379 IOPS
135 IOPS
1,517 KB/s
541 KB/s
9,777 KB/s
7,746 KB/s
528 KB/s
1,336 KB/s

inxi Results
System: Host: RPi3 Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Memory: RAM: total: 991.6 MiB used: 128.1 MiB (12.9%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 189x50 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7+ Network: Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:5 chip ID: 0424:7800 IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: 2a01:e34:efd4:4180:1a6c:9f95:a585:e746/64 type: dynamic mngtmpaddr noprefixroute scope: global IP v6: fe80::91f0:a124:ceef:b07c/64 scope: link IF-ID-1: docker0 state: down mac: XX:XX:XX:XX:XX:XX IP v4: 172.17.X.X/16 scope: global broadcast: 172.17.X.X IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: 78.253.X.X Drives: Local Storage: total: 494.65 GiB used: 44.25 GiB (8.9%) ID-1: /dev/mmcblk0 model: SD32G size: 28.89 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Toshiba model: MK5055GSXN size: 465.76 GiB block size: physical: 512 B logical: 512 B sata: 2.6 speed: 3.0 Gb/s rev: GC00 temp: 46 C scheme: MBR SMART: yes state: enabled health: PASSED on: 4y 233d 11h cycles: 2302 Old-Age: g-sense error rate: 243 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 28.63 GiB size: 28.16 GiB (98.35%) used: 1.71 GiB (6.1%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 ID-3: /mnt/usbdisk raw size: 448.78 GiB size: 441.62 GiB (98.40%) used: 42.49 GiB (9.6%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: DDNAS uuid: 25aaafe7-18e2-46d3-b79c-f18b2850842a ID-4: swap-1 size: 1000.0 MiB used: 776 KiB (0.1%) fs: swap swappiness: 60 (default) cache pressure: 100 (default) dev: /dev/sda3 label: SWAP uuid: 49eb1ee0-ac73-46d8-8613-4f7307a8ec3a Unmounted: ID-1: /dev/sda1 size: 16.00 GiB fs: ext4 label: BOOT uuid: ed9109f1-9148-46a3-9c10-ef5fef2e3d03 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 Device-2: 1-1.2:4 info: ASMedia ASM1051 SATA 3Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 174c:5106 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https://download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.8% command: [kworker/0:0h-mmc_complete] pid: 6348 mem: 0.00 MiB (0.0%) 2: cpu: 0.3% command: bash pid: 7291 mem: 2.73 MiB (0.2%) 3: cpu: 0.0% command: init pid: 1 mem: 8.04 MiB (0.8%) 4: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 5: cpu: 0.0% command: [rcu_gp] pid: 3 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 15.2 MiB (1.5%) command: fail2ban-server started by: python3 pid: 1049 cpu: 0.0% 2: mem: 8.04 MiB (0.8%) command: init pid: 1 cpu: 0.0% 3: mem: 7.04 MiB (0.7%) command: systemd-journald pid: 113 cpu: 0.0% 4: mem: 6.51 MiB (0.6%) command: systemd pid: 4211 cpu: 0.0% 5: mem: 5.94 MiB (0.6%) command: sshd: pid: 4206 cpu: 0.0% Info: Processes: 114 Uptime: 17h 08m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) inxi: 3.0.38

inxi Results

System:    Host: RPi3 Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbdepth=16 
           bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 
           console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 rootfstype=ext4 elevator=deadline fsck.repair=yes 
           rootwait 
           Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 
Memory:    RAM: total: 991.6 MiB used: 128.1 MiB (12.9%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A 
           stepping: 4 microcode: N/A bogomips: 358 
           Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 189x50 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7+ 
Network:   Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:5 chip ID: 0424:7800 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: 2a01:e34:efd4:4180:1a6c:9f95:a585:e746/64 type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6: fe80::91f0:a124:ceef:b07c/64 scope: link 
           IF-ID-1: docker0 state: down mac: XX:XX:XX:XX:XX:XX 
           IP v4: 172.17.X.X/16 scope: global broadcast: 172.17.X.X 
           IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX 
           WAN IP: 78.253.X.X 
Drives:    Local Storage: total: 494.65 GiB used: 44.25 GiB (8.9%) 
           ID-1: /dev/mmcblk0 model: SD32G size: 28.89 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Toshiba model: MK5055GSXN size: 465.76 GiB block size: physical: 512 B 
           logical: 512 B sata: 2.6 speed: 3.0 Gb/s rev: GC00 temp: 46 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 4y 233d 11h cycles: 2302 Old-Age: g-sense error rate: 243 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 28.63 GiB size: 28.16 GiB (98.35%) used: 1.71 GiB (6.1%) fs: ext4 block size: 4096 B 
           dev: /dev/mmcblk0p2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B 
           dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
           ID-3: /mnt/usbdisk raw size: 448.78 GiB size: 441.62 GiB (98.40%) used: 42.49 GiB (9.6%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: DDNAS uuid: 25aaafe7-18e2-46d3-b79c-f18b2850842a 
           ID-4: swap-1 size: 1000.0 MiB used: 776 KiB (0.1%) fs: swap swappiness: 60 (default) cache pressure: 100 (default) 
           dev: /dev/sda3 label: SWAP uuid: 49eb1ee0-ac73-46d8-8613-4f7307a8ec3a 
Unmounted: ID-1: /dev/sda1 size: 16.00 GiB fs: ext4 label: BOOT uuid: ed9109f1-9148-46a3-9c10-ef5fef2e3d03 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 
           Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 
           Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 
           speed: 480 Mb/s chip ID: 0424:7800 
           Device-2: 1-1.2:4 info: ASMedia ASM1051 SATA 3Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 2.1 speed: 480 Mb/s chip ID: 174c:5106 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https://download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.8% command: [kworker/0:0h-mmc_complete] pid: 6348 mem: 0.00 MiB (0.0%) 
           2: cpu: 0.3% command: bash pid: 7291 mem: 2.73 MiB (0.2%) 
           3: cpu: 0.0% command: init pid: 1 mem: 8.04 MiB (0.8%) 
           4: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.0% command: [rcu_gp] pid: 3 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 15.2 MiB (1.5%) command: fail2ban-server started by: python3 pid: 1049 cpu: 0.0% 
           2: mem: 8.04 MiB (0.8%) command: init pid: 1 cpu: 0.0% 
           3: mem: 7.04 MiB (0.7%) command: systemd-journald pid: 113 cpu: 0.0% 
           4: mem: 6.51 MiB (0.6%) command: systemd pid: 4211 cpu: 0.0% 
           5: mem: 5.94 MiB (0.6%) command: sshd: pid: 4206 cpu: 0.0% 
Info:      Processes: 114 Uptime: 17h 08m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Shell: Storage.sh (sudo) inxi: 3.0.38

Benchmark #18182 - Brand: Toshiba Canvio 2.5" MK Series