Benchmark #18518 - pibenchmarks.com

Brand: SanDisk SD Ultra (SL32G)
C10
#73 / 1,701
282
#1,504 / 1,701
#311 / 405
800
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-16 10:58:01
#18,518
567
-233 (-41.09%)
Anonymous

Secure Digital (SD) Card Details
SanDisk SD Ultra (SL32G)
C10
29.7G
SD
SanDisk
SL32G
SDHC
3.00
0x03
SD
8.0
03/2016
Class 10
None
None
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 2B 1.1
Raspberry Pi 2 Model B Rev 1.1
Raspberry Pi Foundation
900
250
450 (+50)
50

Operating System

Raspbian GNU/Linux 9 (stretch)
armv7l

Benchmark Results
6.1 MB/s
21.64 MB/s
21.58 MB/s
223 IOPS
2,283 IOPS
892 KB/s
9,133 KB/s
6,810 KB/s
2,477 KB/s
4,944 KB/s
1,020 KB/s

inxi Results
System: Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=PARTUUID=51906cfb-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) Machine: Type: ARM Device System: Raspberry Pi 2 Model B Rev 1.1 details: BCM2835 rev: a21041 Memory: RAM: total: 1002.1 MiB used: 604.4 MiB (60.3%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a7 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 5 microcode: N/A bogomips: 0 Speed: 600 MHz min/max: 600/900 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 174x53 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.66-v7+ Network: Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: type: mngtmpaddr noprefixroute dynamic scope: global IP v6: type: mngtmpaddr noprefixroute dynamic scope: global IP v6: scope: link WAN IP: No WAN IP data found. Connected to the web? SSL issues? Drives: Local Storage: total: 29.72 GiB used: 5.84 GiB (19.7%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.68 GiB size: 29.19 GiB (98.37%) used: 5.82 GiB (19.9%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 29075e46-f0d4-44e2-a9e7-55ac02d6e6cc ID-2: /boot raw size: 43.9 MiB size: 43.2 MiB (98.43%) used: 22.3 MiB (51.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9304-D9FD Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 Hub: 1-1.3:4 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 1a40:0101 Device-2: 1-1.3.1:6 info: Atmel LUFA USB to Serial Adapter Project type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 1.1 speed: 12 Mb/s chip ID: 03eb:204b Device-3: 1-1.3.2:7 info: Atmel LUFA USB to Serial Adapter Project type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 1.1 speed: 12 Mb/s chip ID: 03eb:204b Device-4: 1-1.3.3:8 info: Future Devices FT232 Serial (UART) IC type: driver: ftdi_sio interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 0403:6001 Device-5: 1-1.5:5 info: Future Devices FT232 Serial (UART) IC type: driver: ftdi_sio interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 0403:6001 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ stretch main ui Processes: CPU top: 5 1: cpu: 2.4% command: perl pid: 606 mem: 189.6 MiB (20.4%) 2: cpu: 0.9% command: pihole-ftl pid: 633 mem: 210.9 MiB (22.7%) 3: cpu: 0.1% command: -bash pid: 30280 mem: 3.93 MiB (0.4%) 4: cpu: 0.1% command: bash pid: 30411 mem: 2.52 MiB (0.2%) 5: cpu: 0.0% command: init pid: 1 mem: 4.57 MiB (0.4%) Memory top: 5 1: mem: 210.9 MiB (22.7%) command: pihole-ftl pid: 633 cpu: 0.9% 2: mem: 189.6 MiB (20.4%) command: perl pid: 606 cpu: 2.4% 3: mem: 44.9 MiB (4.8%) command: alexa-fhem started by: node pid: 716 cpu: 0.0% 4: mem: 21.0 MiB (2.2%) command: unbound pid: 649 cpu: 0.0% 5: mem: 10.8 MiB (1.1%) command: php-cgi pid: 601 cpu: 0.0% Info: Processes: 118 Uptime: 39d Init: systemd v: 232 runlevel: 5 Compilers: gcc: 6.3.0 alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 
           bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 
           dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=PARTUUID=51906cfb-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) 
Machine:   Type: ARM Device System: Raspberry Pi 2 Model B Rev 1.1 details: BCM2835 rev: a21041 
           Memory:    RAM: total: 1002.1 MiB used: 604.4 MiB (60.3%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a7 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 5 microcode: N/A bogomips: 0 
           Speed: 600 MHz min/max: 600/900 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 
           vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 174x53 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.66-v7+ 
Network:   Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB 
           driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  type: mngtmpaddr noprefixroute dynamic scope: global 
           IP v6:  type: mngtmpaddr noprefixroute dynamic scope: global 
           IP v6:  scope: link 
           WAN IP: No WAN IP data found. Connected to the web? SSL issues? 
Drives:    Local Storage: total: 29.72 GiB used: 5.84 GiB (19.7%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL32G size: 29.72 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.68 GiB size: 29.19 GiB (98.37%) used: 5.82 GiB (19.9%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 29075e46-f0d4-44e2-a9e7-55ac02d6e6cc 
           ID-2: /boot raw size: 43.9 MiB size: 43.2 MiB (98.43%) used: 22.3 MiB (51.7%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9304-D9FD 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:9514 
           Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter 
           type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:ec00 
           Hub: 1-1.3:4 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 1a40:0101 
           Device-2: 1-1.3.1:6 info: Atmel LUFA USB to Serial Adapter Project 
           type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 1.1 speed: 12 Mb/s 
           chip ID: 03eb:204b 
           Device-3: 1-1.3.2:7 info: Atmel LUFA USB to Serial Adapter Project 
           type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 1.1 speed: 12 Mb/s 
           chip ID: 03eb:204b 
           Device-4: 1-1.3.3:8 info: Future Devices FT232 Serial (UART) IC type:  
           driver: ftdi_sio interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 0403:6001 
           Device-5: 1-1.5:5 info: Future Devices FT232 Serial (UART) IC type:  
           driver: ftdi_sio interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 0403:6001 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ stretch main ui
Processes: CPU top: 5 
           1: cpu: 2.4% command: perl pid: 606 mem: 189.6 MiB (20.4%) 
           2: cpu: 0.9% command: pihole-ftl pid: 633 mem: 210.9 MiB (22.7%) 
           3: cpu: 0.1% command: -bash pid: 30280 mem: 3.93 MiB (0.4%) 
           4: cpu: 0.1% command: bash pid: 30411 mem: 2.52 MiB (0.2%) 
           5: cpu: 0.0% command: init pid: 1 mem: 4.57 MiB (0.4%) 
           Memory top: 5 
           1: mem: 210.9 MiB (22.7%) command: pihole-ftl pid: 633 cpu: 0.9% 
           2: mem: 189.6 MiB (20.4%) command: perl pid: 606 cpu: 2.4% 
           3: mem: 44.9 MiB (4.8%) command: alexa-fhem started by: node pid: 716 cpu: 0.0% 
           4: mem: 21.0 MiB (2.2%) command: unbound pid: 649 cpu: 0.0% 
           5: mem: 10.8 MiB (1.1%) command: php-cgi pid: 601 cpu: 0.0% 
Info:      Processes: 118 Uptime: 39d Init: systemd v: 232 runlevel: 5 Compilers: gcc: 6.3.0 
           alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.0.38

Benchmark #18518 - Brand: SanDisk SD Ultra (SL32G)