Benchmark #18694 - pibenchmarks.com

Brand: Samsung 850 EVO
SSD (2.5" SATA)
#17 / 1,539
561
#443 / 1,539
#425 / 875
#97 / 363
6,521
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-17 05:21:11
#18,694
6,161
-360 (-5.84%)
Anonymous

Storage Details
Samsung 850 EVO
SSD (2.5" SATA)
250G
SSD
Samsung
SSD850EVO250GB
2.5 inch
SATA
3.00
5,000
1d6b:0731
0x1d6b (Linux Foundation)
0x0731 (GL3310 SATA 3Gb/s Bridge Controller)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
162 MB/s
144.28 MB/s
150.03 MB/s
6,597 IOPS
5,044 IOPS
26,391 KB/s
20,177 KB/s
28,123 KB/s
21,303 KB/s
18,817 KB/s
23,946 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 222.9 MiB (5.6%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link IF-ID-2: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A IP v4: scope: global broadcast: IP v6: virtual: stable-privacy scope: link IF-ID-3: wlan0 state: down mac: WAN IP: No WAN IP data found. Connected to the web? SSL issues? Drives: Local Storage: total: 262.61 GiB used: 21.82 GiB (8.3%) ID-1: /dev/mmcblk0 vendor: Silicon Motion model: SM32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB model: 05e3 U3 Hard Drive drive model: SSD 850 EVO 250GB family: based SSDs size: 232.89 GiB block size: physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rev: 9072 drive rev: EMT02B6Q temp: 37 C scheme: MBR SMART: yes state: enabled health: PASSED on: 2y 201d 7h cycles: 1689 written: 21.14 TiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 232.63 GiB size: 228.95 GiB (98.42%) used: 21.77 GiB (9.5%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9969-E3D2 Unmounted: ID-1: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 9969-E3D2 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: Genesys Logic GL3310 SATA 3Gb/s Bridge Controller type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 05e3:0731 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/speedtest.list 1: deb https: //ookla.bintray.com/debian buster main Processes: CPU top: 5 1: cpu: 7.1% command: init pid: 1 mem: 7.57 MiB (0.1%) 2: cpu: 1.8% command: systemd-journald pid: 107 mem: 7.00 MiB (0.1%) 3: cpu: 1.7% command: systemd-udevd pid: 147 mem: 3.86 MiB (0.0%) 4: cpu: 1.4% command: [usb-storage] pid: 79 mem: 0.00 MiB (0.0%) 5: cpu: 1.1% command: packagekitd pid: 1066 mem: 12.7 MiB (0.3%) Memory top: 5 1: mem: 17.0 MiB (0.4%) command: unattended-upgrade-shutdown started by: python3 pid: 481 cpu: 0.8% 2: mem: 12.7 MiB (0.3%) command: packagekitd pid: 1066 cpu: 1.1% 3: mem: 7.57 MiB (0.1%) command: init pid: 1 cpu: 7.1% 4: mem: 7.20 MiB (0.1%) command: systemd pid: 704 cpu: 0.6% 5: mem: 7.00 MiB (0.1%) command: systemd-journald pid: 107 cpu: 1.8% Info: Processes: 138 Uptime: N/A Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 222.9 MiB (5.6%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 80x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-2: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A 
           IP v4:  scope: global broadcast:  
           IP v6:  virtual: stable-privacy scope: link 
           IF-ID-3: wlan0 state: down mac:  
           WAN IP: No WAN IP data found. Connected to the web? SSL issues? 
Drives:    Local Storage: total: 262.61 GiB used: 21.82 GiB (8.3%) 
           ID-1: /dev/mmcblk0 vendor: Silicon Motion model: SM32G size: 29.72 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB model: 05e3 U3 Hard Drive drive model: SSD 850 EVO 250GB 
           family: based SSDs size: 232.89 GiB block size: physical: 512 B logical: 512 B 
           sata: 3.1 speed: 6.0 Gb/s rev: 9072 
           drive rev: EMT02B6Q temp: 37 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 2y 201d 7h cycles: 1689 written: 21.14 TiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 232.63 GiB size: 228.95 GiB (98.42%) used: 21.77 GiB (9.5%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9969-E3D2 
Unmounted: ID-1: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs 
           uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 9969-E3D2 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: Genesys Logic GL3310 SATA 3Gb/s Bridge Controller 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s 
           chip ID: 05e3:0731 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/speedtest.list 
           1: deb https: //ookla.bintray.com/debian buster main
Processes: CPU top: 5 
           1: cpu: 7.1% command: init pid: 1 mem: 7.57 MiB (0.1%) 
           2: cpu: 1.8% command: systemd-journald pid: 107 mem: 7.00 MiB (0.1%) 
           3: cpu: 1.7% command: systemd-udevd pid: 147 mem: 3.86 MiB (0.0%) 
           4: cpu: 1.4% command: [usb-storage] pid: 79 mem: 0.00 MiB (0.0%) 
           5: cpu: 1.1% command: packagekitd pid: 1066 mem: 12.7 MiB (0.3%) 
           Memory top: 5 
           1: mem: 17.0 MiB (0.4%) command: unattended-upgrade-shutdown started by: python3 
           pid: 481 cpu: 0.8% 
           2: mem: 12.7 MiB (0.3%) command: packagekitd pid: 1066 cpu: 1.1% 
           3: mem: 7.57 MiB (0.1%) command: init pid: 1 cpu: 7.1% 
           4: mem: 7.20 MiB (0.1%) command: systemd pid: 704 cpu: 0.6% 
           5: mem: 7.00 MiB (0.1%) command: systemd-journald pid: 107 cpu: 1.8% 
Info:      Processes: 138 Uptime: N/A Init: systemd v: 241 runlevel: 3 target: multi-user.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #18694 - Brand: Samsung 850 EVO