Benchmark #18738 - pibenchmarks.com

Brand: Hitachi TravelStar 5400RPM
HDD (2.5" SATA)
#138 / 1,700
132
#1,119 / 1,700
#27 / 69
#3 / 20
1,862
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.sg

Overview
2020-04-17 09:13:27
#18,738
684
-1,178 (-172.22%)
Anonymous
Hitachi sata on pi4 sata to usb 3

Storage Details
Hitachi TravelStar 5400RPM
HDD (2.5" SATA)
HDD
Hitachi
HTS543216L9A300
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
aarch64

Benchmark Results
36.9 MB/s
279 IOPS
113 IOPS
1,118 KB/s
454 KB/s
11,433 KB/s
8,693 KB/s
416 KB/s
660 KB/s

inxi Results
System: Kernel: 4.19.75v64 aarch64 bits: 32 compiler: gcc v: 7.4.0 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1280x720M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 elevator=deadline quiet bootmenutimeout=5 datadev=UUID=ec109bf4-cb75-4b3e-80d2-d821bc8fff85 qmap=gb ipv4=192.168.X.X/255.255.X.X/192.168.X.X Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.89 GiB used: 368.2 MiB (19.0%) gpu: 160.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75v64 Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: IF-ID-2: wlan0 state: up mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 178.86 GiB used: 53.3 MiB (0.0%) ID-1: /dev/mmcblk0 model: EB1QT size: 29.81 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Hitachi model: HTS543216L9A300 family: Travelstar 5K320 size: 149.05 GiB block size: physical: 512 B logical: 512 B sata: 2.6 speed: 3.0 Gb/s rotation: 5400 rpm rev: FB2OC40C temp: 30 C scheme: MBR SMART: yes state: enabled health: PASSED on: 278d 20h cycles: 2402 read: 6.95 TiB written: 6.35 TiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: /boot raw size: 29.81 GiB size: 29.80 GiB (99.97%) used: 53.3 MiB (0.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: BOOT uuid: D9EE-AC8C Unmounted: ID-1: /dev/sda1 size: 127.0 MiB fs: N/A label: N/A uuid: N/A ID-2: /dev/sda2 size: 148.93 GiB fs: ext4 label: berryboot uuid: ec109bf4-cb75-4b3e-80d2-d821bc8fff85 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 1.1% command: lib/systemd/systemd pid: 1 mem: 7.93 MiB (0.4%) 2: cpu: 0.8% command: lxpanel pid: 686 mem: 29.1 MiB (1.6%) 3: cpu: 0.8% command: packagekitd pid: 1707 mem: 12.5 MiB (0.7%) 4: cpu: 0.7% command: xorg pid: 536 mem: 46.1 MiB (2.6%) 5: cpu: 0.3% command: pcmanfm pid: 687 mem: 24.0 MiB (1.3%) Memory top: 5 1: mem: 46.1 MiB (2.6%) command: xorg pid: 536 cpu: 0.7% 2: mem: 29.1 MiB (1.6%) command: lxpanel pid: 686 cpu: 0.8% 3: mem: 24.0 MiB (1.3%) command: pcmanfm pid: 687 cpu: 0.3% 4: mem: 15.4 MiB (0.8%) command: vncserverui pid: 733 cpu: 0.0% 5: mem: 14.8 MiB (0.8%) command: openbox pid: 674 cpu: 0.0% Info: Processes: 155 Uptime: 5m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.75v64 aarch64 bits: 32 compiler: gcc v: 7.4.0 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1280x720M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 elevator=deadline quiet bootmenutimeout=5 
           datadev=UUID=ec109bf4-cb75-4b3e-80d2-d821bc8fff85 qmap=gb 
           ipv4=192.168.X.X/255.255.X.X/192.168.X.X 
           Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
           Memory:    RAM: total: 1.89 GiB used: 368.2 MiB (19.0%) gpu: 160.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 
           family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr 
           tty: 80x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.75v64 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac:  
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 178.86 GiB used: 53.3 MiB (0.0%) 
           ID-1: /dev/mmcblk0 model: EB1QT size: 29.81 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Hitachi model: HTS543216L9A300 
           family: Travelstar 5K320 size: 149.05 GiB block size: physical: 512 B logical: 512 B 
           sata: 2.6 speed: 3.0 Gb/s rotation: 5400 rpm rev: FB2OC40C temp: 30 C 
           scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 278d 20h cycles: 2402 read: 6.95 TiB 
           written: 6.35 TiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: /boot raw size: 29.81 GiB size: 29.80 GiB (99.97%) used: 53.3 MiB (0.2%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p1 label: BOOT uuid: D9EE-AC8C 
Unmounted: ID-1: /dev/sda1 size: 127.0 MiB fs: N/A label: N/A uuid: N/A 
           ID-2: /dev/sda2 size: 148.93 GiB fs: ext4 label: berryboot 
           uuid: ec109bf4-cb75-4b3e-80d2-d821bc8fff85 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa 
           Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 1.1% command: lib/systemd/systemd pid: 1 mem: 7.93 MiB (0.4%) 
           2: cpu: 0.8% command: lxpanel pid: 686 mem: 29.1 MiB (1.6%) 
           3: cpu: 0.8% command: packagekitd pid: 1707 mem: 12.5 MiB (0.7%) 
           4: cpu: 0.7% command: xorg pid: 536 mem: 46.1 MiB (2.6%) 
           5: cpu: 0.3% command: pcmanfm pid: 687 mem: 24.0 MiB (1.3%) 
           Memory top: 5 
           1: mem: 46.1 MiB (2.6%) command: xorg pid: 536 cpu: 0.7% 
           2: mem: 29.1 MiB (1.6%) command: lxpanel pid: 686 cpu: 0.8% 
           3: mem: 24.0 MiB (1.3%) command: pcmanfm pid: 687 cpu: 0.3% 
           4: mem: 15.4 MiB (0.8%) command: vncserverui pid: 733 cpu: 0.0% 
           5: mem: 14.8 MiB (0.8%) command: openbox pid: 674 cpu: 0.0% 
Info:      Processes: 155 Uptime: 5m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #18738 - Brand: Hitachi TravelStar 5400RPM