Benchmark #18881 - pibenchmarks.com

Brand: Western Digital Green
SSD (2.5" SATA)
#38 / 1,700
446
#884 / 1,700
#841 / 989
#283 / 370
4,773
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-17 23:20:38
#18,881
5,192
+419 (+8.07%)
Anonymous
WD-green

Storage Details
Western Digital Green
SSD (2.5" SATA)
120G
SSD
WDC
WDS120G2G0A-00JH30
2.5 inch
SATA
3.00
5,000
05e3:0828
0x05e3
0x0828 (HD Webcam B990)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
84.9 MB/s
282.82 MB/s
247.62 MB/s
8,752 IOPS
20,876 IOPS
35,008 KB/s
83,506 KB/s
14,139 KB/s
15,691 KB/s
14,079 KB/s
17,604 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 467.8 MiB (11.7%) gpu: 320.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 99x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 1.94 TiB used: 6.03 GiB (0.3%) ID-1: /dev/mmcblk0 model: USDU1 size: 15.06 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Western Digital model: WDS120G2G0A-00JH30 size: 111.80 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? ID-3: /dev/sdb type: USB vendor: Seagate model: ST2000LM015-2E8174 size: 1.82 TiB block size: physical: 4096 B logical: 512 B rotation: 5400 rpm scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 111.54 GiB size: 109.74 GiB (98.39%) used: 5.98 GiB (5.4%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9969-E3D2 Unmounted: ID-1: /dev/mmcblk0p2 size: 14.81 GiB fs: ext4 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 9969-E3D2 ID-3: /dev/sdb1 size: 1.82 TiB fs: exfat label: media uuid: 3EF4-D0A0 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.2:3 info: Genesys Logic 4-port hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 05e3:0610 Hub: 1-1.2.1:4 info: Genesys Logic 4-port hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 05e3:0610 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Hub: 2-2:2 info: Genesys Logic ports: 4 rev: 3.2 speed: 5 Gb/s chip ID: 05e3:0620 Hub: 2-2.1:3 info: Genesys Logic ports: 4 rev: 3.2 speed: 5 Gb/s chip ID: 05e3:0620 Device-1: 2-2.1.2:5 info: ASMedia type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:0828 Device-2: 2-2.2:4 info: ASMedia type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:0828 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 1.3% command: [kworker/u8:0-brcmf_wq/mmc1:0001:1] pid: 1918 mem: 0.00 MiB (0.0%) 2: cpu: 0.1% command: init pid: 1 mem: 8.03 MiB (0.2%) 3: cpu: 0.1% command: [irq/37-mmc1] pid: 70 mem: 0.00 MiB (0.0%) 4: cpu: 0.1% command: [kworker/u8:1-events_unbound] pid: 1248 mem: 0.00 MiB (0.0%) 5: cpu: 0.1% command: [kworker/u8:4-events_unbound] pid: 1392 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 12.9 MiB (0.3%) command: packagekitd pid: 2069 cpu: 0.1% 2: mem: 8.03 MiB (0.2%) command: init pid: 1 cpu: 0.1% 3: mem: 7.21 MiB (0.1%) command: systemd pid: 487 cpu: 0.0% 4: mem: 7.07 MiB (0.1%) command: polkitd pid: 734 cpu: 0.0% 5: mem: 6.95 MiB (0.1%) command: systemd-journald pid: 108 cpu: 0.0% Info: Processes: 132 Uptime: 46m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 467.8 MiB (11.7%) gpu: 320.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 99x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac:  
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 1.94 TiB used: 6.03 GiB (0.3%) 
           ID-1: /dev/mmcblk0 model: USDU1 size: 15.06 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Western Digital model: WDS120G2G0A-00JH30 
           size: 111.80 GiB block size: physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           ID-3: /dev/sdb type: USB vendor: Seagate model: ST2000LM015-2E8174 size: 1.82 TiB 
           block size: physical: 4096 B logical: 512 B rotation: 5400 rpm scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 111.54 GiB size: 109.74 GiB (98.39%) used: 5.98 GiB (5.4%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9969-E3D2 
Unmounted: ID-1: /dev/mmcblk0p2 size: 14.81 GiB fs: ext4 label: rootfs 
           uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 9969-E3D2 
           ID-3: /dev/sdb1 size: 1.82 TiB fs: exfat label: media uuid: 3EF4-D0A0 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.2:3 info: Genesys Logic 4-port hub ports: 4 rev: 2.1 speed: 480 Mb/s 
           chip ID: 05e3:0610 
           Hub: 1-1.2.1:4 info: Genesys Logic 4-port hub ports: 4 rev: 2.1 speed: 480 Mb/s 
           chip ID: 05e3:0610 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Hub: 2-2:2 info: Genesys Logic ports: 4 rev: 3.2 speed: 5 Gb/s chip ID: 05e3:0620 
           Hub: 2-2.1:3 info: Genesys Logic ports: 4 rev: 3.2 speed: 5 Gb/s chip ID: 05e3:0620 
           Device-1: 2-2.1.2:5 info: ASMedia type: Mass Storage driver: uas interfaces: 1 rev: 3.0 
           speed: 5 Gb/s chip ID: 174c:0828 Device-2: 2-2.2:4 info: ASMedia type: Mass Storage driver: uas interfaces: 1 rev: 3.0 
           speed: 5 Gb/s chip ID: 174c:0828 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 1.3% command: [kworker/u8:0-brcmf_wq/mmc1:0001:1] pid: 1918 
           mem: 0.00 MiB (0.0%) 
           2: cpu: 0.1% command: init pid: 1 mem: 8.03 MiB (0.2%) 
           3: cpu: 0.1% command: [irq/37-mmc1] pid: 70 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.1% command: [kworker/u8:1-events_unbound] pid: 1248 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.1% command: [kworker/u8:4-events_unbound] pid: 1392 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 12.9 MiB (0.3%) command: packagekitd pid: 2069 cpu: 0.1% 
           2: mem: 8.03 MiB (0.2%) command: init pid: 1 cpu: 0.1% 
           3: mem: 7.21 MiB (0.1%) command: systemd pid: 487 cpu: 0.0% 
           4: mem: 7.07 MiB (0.1%) command: polkitd pid: 734 cpu: 0.0% 
           5: mem: 6.95 MiB (0.1%) command: systemd-journald pid: 108 cpu: 0.0% 
Info:      Processes: 132 Uptime: 46m Init: systemd v: 241 runlevel: 3 target: multi-user.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #18881 - Brand: Western Digital Green