Benchmark #18904 - pibenchmarks.com

Brand: Transcend MSA Series
SSD (mSATA)
#71 / 1,539
153
#526 / 1,539
#506 / 875
#25 / 69
6,098
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-18 01:59:55
#18,904
8,177
+2,079 (+25.42%)
Anonymous

Storage Details
Transcend MSA Series
SSD (mSATA)
128G
SSD
Transcend
TS128GMSA230S
SATA
3.00
5,000
174c:0850
0x174c (ASMedia Technology Inc.)
0x0850 (QuickCam Web)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,600 (+100)
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
152 MB/s
287.3 MB/s
242.81 MB/s
11,415 IOPS
23,459 IOPS
45,663 KB/s
93,837 KB/s
31,916 KB/s
25,086 KB/s
21,629 KB/s
31,064 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet net.ifnames=0 Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.88 GiB used: 151.2 MiB (3.8%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 0 Speed: 533 MHz min/max: 320/1600 MHz Core speeds (MHz): 1: 320 2: 320 3: 320 4: 320 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 162x61 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: scope: global broadcast: WAN IP: Drives: Local Storage: total: 134.11 GiB used: 1.03 GiB (0.8%) ID-1: /dev/mmcblk0 model: USD size: 14.87 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Transcend model: TS128GMSA230S size: 119.24 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 118.99 GiB size: 117.12 GiB (98.43%) used: 1005.1 MiB (0.8%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.6 MiB (21.3%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 Unmounted: ID-1: /dev/mmcblk0p2 size: 14.61 GiB fs: ext4 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 5203-DB74 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: ASMedia type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:0850 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb https: //archive.raspberrypi.org/debian/ buster main ui Processes: CPU top: 5 1: cpu: 2.3% command: init pid: 1 mem: 7.84 MiB (0.1%) 2: cpu: 0.8% command: fail2ban-server started by: python3 pid: 515 mem: 15.1 MiB (0.3%) 3: cpu: 0.6% command: pihole-ftl pid: 646 mem: 18.1 MiB (0.4%) 4: cpu: 0.5% command: sshd: pid: 799 mem: 6.11 MiB (0.1%) 5: cpu: 0.4% command: bash pid: 885 mem: 2.49 MiB (0.0%) Memory top: 5 1: mem: 21.3 MiB (0.5%) command: php-fpm: pid: 726 cpu: 0.1% 2: mem: 18.1 MiB (0.4%) command: pihole-ftl pid: 646 cpu: 0.6% 3: mem: 17.8 MiB (0.4%) command: pihole-ftl pid: 801 cpu: 0.0% 4: mem: 17.8 MiB (0.4%) command: pihole-ftl pid: 802 cpu: 0.0% 5: mem: 15.1 MiB (0.3%) command: fail2ban-server started by: python3 pid: 515 cpu: 0.8% Info: Processes: 113 Uptime: 1m Init: systemd v: 241 runlevel: 5 Compilers: gcc: N/A Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M bcm2708_fb.fbwidth=0 
           bcm2708_fb.fbheight=0 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait quiet net.ifnames=0 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.88 GiB used: 151.2 MiB (3.8%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 0 
           Speed: 533 MHz min/max: 320/1600 MHz Core speeds (MHz): 1: 320 2: 320 3: 320 4: 320 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 162x61 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           WAN IP:  
Drives:    Local Storage: total: 134.11 GiB used: 1.03 GiB (0.8%) 
           ID-1: /dev/mmcblk0 model: USD size: 14.87 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Transcend model: TS128GMSA230S size: 119.24 GiB 
           block size: physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 118.99 GiB size: 117.12 GiB (98.43%) used: 1005.1 MiB (0.8%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.6 MiB (21.3%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
Unmounted: ID-1: /dev/mmcblk0p2 size: 14.61 GiB fs: ext4 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 5203-DB74 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: ASMedia type: Mass Storage driver: uas interfaces: 1 rev: 3.0 
           speed: 5 Gb/s chip ID: 174c:0850 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb https: //archive.raspberrypi.org/debian/ buster main ui
Processes: CPU top: 5 
           1: cpu: 2.3% command: init pid: 1 mem: 7.84 MiB (0.1%) 
           2: cpu: 0.8% command: fail2ban-server started by: python3 pid: 515 mem: 15.1 MiB (0.3%) 
           3: cpu: 0.6% command: pihole-ftl pid: 646 mem: 18.1 MiB (0.4%) 
           4: cpu: 0.5% command: sshd: pid: 799 mem: 6.11 MiB (0.1%) 
           5: cpu: 0.4% command: bash pid: 885 mem: 2.49 MiB (0.0%) 
           Memory top: 5 
           1: mem: 21.3 MiB (0.5%) command: php-fpm: pid: 726 cpu: 0.1% 
           2: mem: 18.1 MiB (0.4%) command: pihole-ftl pid: 646 cpu: 0.6% 
           3: mem: 17.8 MiB (0.4%) command: pihole-ftl pid: 801 cpu: 0.0% 
           4: mem: 17.8 MiB (0.4%) command: pihole-ftl pid: 802 cpu: 0.0% 
           5: mem: 15.1 MiB (0.3%) command: fail2ban-server started by: python3 pid: 515 cpu: 0.8% 
Info:      Processes: 113 Uptime: 1m Init: systemd v: 241 runlevel: 5 Compilers: gcc: N/A 
           Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #18904 - Brand: Transcend MSA Series