Benchmark #18944 - pibenchmarks.com

Brand: Steelram FS200 USB pSSD
SSD (Portable)
#329 / 1,665
33
#1,395 / 1,665
#972 / 977
#140 / 144
1,014
	AliExpress

Overview
2020-04-18 05:42:19
#18,944
550
-464 (-84.36%)
SteelRam
SteelRam 64GB FS200 USB stick

Storage Details
Steelram FS200 USB pSSD
SSD (Portable)
58.8G
SSD
Steelram
SteelRamA01
2.00
480
0424:0a01
0x0424 (Microchip Technology, Inc. (formerly SMSC))
0x0a01 (USB Headset)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B 1.2
Raspberry Pi 3 Model B Rev 1.2
Raspberry Pi Foundation
1,200
400
450

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
11.5 MB/s
28.11 MB/s
27.37 MB/s
172 IOPS
867 IOPS
691 KB/s
3,470 KB/s
11,282 KB/s
1,337 KB/s
4,648 KB/s
737 KB/s

inxi Results
System: Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 Memory: RAM: total: 1002.1 MiB used: 167.8 MiB (16.7%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 307 Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 4: 1200 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 173x37 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7+ Network: Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-1: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 73.46 GiB used: 1.33 GiB (1.8%) ID-1: /dev/mmcblk0 model: SD16G size: 14.46 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Seagate model: SteelRam A01 size: 59.00 GiB block size: physical: 512 B logical: 512 B rev: PMAP scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 58.75 GiB size: 57.81 GiB (98.41%) used: 1.28 GiB (2.2%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 Unmounted: ID-1: /dev/mmcblk0p2 size: 14.20 GiB fs: ext4 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 Device-2: 1-1.2:4 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 7788:0a01 Hub: 1-1.5:5 info: Genesys Logic 4-port hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 05e3:0610 Device-3: 1-1.5.1:6 info: Holtek type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 04d9:0006 Device-4: 1-1.5.4:7 info: MosArt type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 12 Mb/s chip ID: 062a:6728 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 1.5% command: init pid: 1 mem: 8.03 MiB (0.8%) 2: cpu: 1.4% command: top pid: 590 mem: 2.80 MiB (0.3%) 3: cpu: 0.6% command: [usb-storage] pid: 77 mem: 0.00 MiB (0.0%) 4: cpu: 0.2% command: systemd-udevd pid: 139 mem: 3.96 MiB (0.4%) 5: cpu: 0.1% command: [kworker/3:2-mm_percpu_wq] pid: 68 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 8.03 MiB (0.8%) command: init pid: 1 cpu: 1.5% 2: mem: 6.56 MiB (0.7%) command: systemd pid: 507 cpu: 0.0% 3: mem: 6.29 MiB (0.6%) command: systemd-journald pid: 99 cpu: 0.1% 4: mem: 6.05 MiB (0.6%) command: sshd: pid: 501 cpu: 0.0% 5: mem: 5.54 MiB (0.5%) command: systemd-logind pid: 312 cpu: 0.0% Info: Processes: 125 Uptime: 8m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=1824 
           bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 
           root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 
           Memory:    RAM: total: 1002.1 MiB used: 167.8 MiB (16.7%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 307 
           Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 
           4: 1200 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 173x37 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7+ 
Network:   Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB 
           driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-1: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 73.46 GiB used: 1.33 GiB (1.8%) 
           ID-1: /dev/mmcblk0 model: SD16G size: 14.46 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Seagate model: SteelRam A01 size: 59.00 GiB 
           block size: physical: 512 B logical: 512 B rev: PMAP scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 58.75 GiB size: 57.81 GiB (98.41%) used: 1.28 GiB (2.2%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
Unmounted: ID-1: /dev/mmcblk0p2 size: 14.20 GiB fs: ext4 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:9514 
           Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter 
           type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:ec00 
           Device-2: 1-1.2:4 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 2.1 speed: 480 Mb/s chip ID: 7788:0a01 Hub: 1-1.5:5 info: Genesys Logic 4-port hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 05e3:0610 
           Device-3: 1-1.5.1:6 info: Holtek type: Keyboard,HID driver: hid-generic,usbhid 
           interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 04d9:0006 
           Device-4: 1-1.5.4:7 info: MosArt type: Mouse driver: hid-generic,usbhid interfaces: 1 
           rev: 1.1 speed: 12 Mb/s chip ID: 062a:6728 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 1.5% command: init pid: 1 mem: 8.03 MiB (0.8%) 
           2: cpu: 1.4% command: top pid: 590 mem: 2.80 MiB (0.3%) 
           3: cpu: 0.6% command: [usb-storage] pid: 77 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.2% command: systemd-udevd pid: 139 mem: 3.96 MiB (0.4%) 
           5: cpu: 0.1% command: [kworker/3:2-mm_percpu_wq] pid: 68 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 8.03 MiB (0.8%) command: init pid: 1 cpu: 1.5% 
           2: mem: 6.56 MiB (0.7%) command: systemd pid: 507 cpu: 0.0% 
           3: mem: 6.29 MiB (0.6%) command: systemd-journald pid: 99 cpu: 0.1% 
           4: mem: 6.05 MiB (0.6%) command: sshd: pid: 501 cpu: 0.0% 
           5: mem: 5.54 MiB (0.5%) command: systemd-logind pid: 312 cpu: 0.0% 
Info:      Processes: 125 Uptime: 8m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #18944 - Brand: Steelram FS200 USB pSSD