Benchmark #18955 - pibenchmarks.com

Brand: Generic USB Disk
USB Flash
#13 / 1,539
610
#828 / 1,539
#4 / 90
#8 / 86
4,005
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-18 06:36:20
#18,955
5,860
+1,855 (+31.66%)
Julius
Patriot burst 120 gb SSD on Startech 2,5 SATA adapter

Storage Details
Generic USB Disk
USB Flash
111.5G
USB Flash
Generic
GenericFlashDisk
3.00
5,000
1d6b:0711
0x1d6b (Linux Foundation)
0x0711 (SMCWUSBT-G (no firmware))
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
159 MB/s
173.06 MB/s
158 MB/s
6,478 IOPS
4,210 IOPS
25,915 KB/s
16,842 KB/s
28,999 KB/s
21,882 KB/s
17,013 KB/s
22,270 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Battery: Device-1: hid-XX:XX:XX:XX:XX:XX-battery model: Kensington BT Keyboard N/A charge: N/A status: Full Memory: RAM: total: 3.89 GiB used: 677.8 MiB (17.0%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 540 Speed: 750 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 750 2: 750 3: 750 4: 750 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr resolution: 1920x1080~60Hz Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-3: veth17a3510 state: up speed: 10000 Mbps duplex: full mac: IF-ID-4: veth2f6b750 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth36f2604 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth7d7b859 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth84ec123 state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: vethb25584d state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: vethcdd9bbc state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: vetheae2533 state: up speed: 10000 Mbps duplex: full mac: IF-ID-11: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 126.31 GiB used: 26.48 GiB (21.0%) ID-1: /dev/mmcblk0 model: 00000 size: 14.52 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB model: USB3.0 high speed size: 111.79 GiB block size: physical: 512 B logical: 512 B rev: 2210 scheme: MBR SMART Message: A mandatory SMART command failed. Various possible causes. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 111.54 GiB size: 109.74 GiB (98.39%) used: 10.35 GiB (9.4%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9969-E3D2 ID-3: /media/root/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 9969-E3D2 ID-4: /media/root/rootfs raw size: 14.27 GiB size: 13.98 GiB (97.99%) used: 5.67 GiB (40.6%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 ID-5: /var/lib/docker/overlay2/0dba1769ee7b2e68696084d399e096e3e7ed199aa7cf62a827e78b50fe8afd1e/merged raw size: N/A size: 109.74 GiB used: 10.35 GiB (9.4%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-6: /var/lib/docker/overlay2/0e144165a19957a20f6a7a3f93739edb63c6fdeb5238b86487504f96d69ffe62/merged raw size: N/A size: 109.74 GiB used: 10.35 GiB (9.4%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-7: /var/lib/docker/overlay2/3265a8820fc0f4f20a296fc6984fe047d480c8bb1d45eab4db40e72aa1134dee/merged raw size: N/A size: 109.74 GiB used: 10.35 GiB (9.4%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-8: /var/lib/docker/overlay2/36b4629adf09cd0a2fb846289a1d9a05b19353f09521349d5c7f3b1bfb109a26/merged raw size: N/A size: 109.74 GiB used: 10.35 GiB (9.4%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-9: /var/lib/docker/overlay2/4d6bf6a032558b10368dca824a7f7067063fa40f5eabec0ec2af4618961210d0/merged raw size: N/A size: 109.74 GiB used: 10.35 GiB (9.4%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-10: /var/lib/docker/overlay2/be330835171d9d766eb1841c4f6c92460402f696da222c00474151134a2fe1be/merged raw size: N/A size: 109.74 GiB used: 10.35 GiB (9.4%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-11: /var/lib/docker/overlay2/d33fb9c012b0e2bf7a80d4923001e33b889eeeb7c20383b47620f952f768b8ed/merged raw size: N/A size: 109.74 GiB used: 10.35 GiB (9.4%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-12: /var/lib/docker/overlay2/d5cb4767196afe2b36158a8e91edbc94d5104dda5ec9de56f75cb16150b3f1be/merged raw size: N/A size: 109.74 GiB used: 10.35 GiB (9.4%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-13: /var/lib/docker/overlay2/e2430db1484741e1ec6f7b00f91bb4f62f5bd8802bb3be2cc3973b6830f4d936/merged raw size: N/A size: 109.74 GiB used: 10.35 GiB (9.4%) fs: overlay source: ERR-102 label: N/A uuid: N/A Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: VIA Labs type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 2109:0711 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 5.8% command: python3 pid: 2323 mem: 112.8 MiB (2.8%) 2: cpu: 4.8% command: xorg pid: 30218 mem: 55.8 MiB (1.4%) 3: cpu: 2.8% command: lxterminal pid: 30727 mem: 28.0 MiB (0.7%) 4: cpu: 1.2% command: pcmanfm pid: 30352 mem: 25.4 MiB (0.6%) 5: cpu: 0.7% command: lxpanel pid: 30350 mem: 28.9 MiB (0.7%) Memory top: 5 1: mem: 112.8 MiB (2.8%) command: python3 pid: 2323 cpu: 5.8% 2: mem: 67.6 MiB (1.7%) command: dockerd pid: 450 cpu: 0.4% 3: mem: 55.8 MiB (1.4%) command: xorg pid: 30218 cpu: 4.8% 4: mem: 34.2 MiB (0.8%) command: grafana-server pid: 1971 cpu: 0.1% 5: mem: 33.5 MiB (0.8%) command: containerd pid: 444 cpu: 0.1% Info: Processes: 254 Uptime: 3h 50m Init: systemd v: 241 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Battery:   Device-1: hid-XX:XX:XX:XX:XX:XX-battery model: Kensington BT Keyboard N/A 
           charge: N/A status: Full 
Memory:    RAM: total: 3.89 GiB used: 677.8 MiB (17.0%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 540 
           Speed: 750 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 750 2: 750 3: 750 4: 750 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr 
           resolution: 1920x1080~60Hz 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-3: veth17a3510 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-4: veth2f6b750 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: veth36f2604 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: veth7d7b859 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: veth84ec123 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-8: vethb25584d state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-9: vethcdd9bbc state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-10: vetheae2533 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-11: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 126.31 GiB used: 26.48 GiB (21.0%) 
           ID-1: /dev/mmcblk0 model: 00000 size: 14.52 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB model: USB3.0 high speed size: 111.79 GiB block size: 
           physical: 512 B logical: 512 B rev: 2210 scheme: MBR 
           SMART Message: A mandatory SMART command failed. Various possible causes. 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 111.54 GiB size: 109.74 GiB (98.39%) used: 10.35 GiB (9.4%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9969-E3D2 
           ID-3: /media/root/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
           used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot 
           uuid: 9969-E3D2 
           ID-4: /media/root/rootfs raw size: 14.27 GiB size: 13.98 GiB (97.99%) 
           used: 5.67 GiB (40.6%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 
           ID-5: /var/lib/docker/overlay2/0dba1769ee7b2e68696084d399e096e3e7ed199aa7cf62a827e78b50fe8afd1e/merged raw size: N/A size: 109.74 GiB used: 10.35 GiB (9.4%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-6: /var/lib/docker/overlay2/0e144165a19957a20f6a7a3f93739edb63c6fdeb5238b86487504f96d69ffe62/merged raw size: N/A size: 109.74 GiB used: 10.35 GiB (9.4%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-7: /var/lib/docker/overlay2/3265a8820fc0f4f20a296fc6984fe047d480c8bb1d45eab4db40e72aa1134dee/merged raw size: N/A size: 109.74 GiB used: 10.35 GiB (9.4%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-8: /var/lib/docker/overlay2/36b4629adf09cd0a2fb846289a1d9a05b19353f09521349d5c7f3b1bfb109a26/merged raw size: N/A size: 109.74 GiB used: 10.35 GiB (9.4%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-9: /var/lib/docker/overlay2/4d6bf6a032558b10368dca824a7f7067063fa40f5eabec0ec2af4618961210d0/merged raw size: N/A size: 109.74 GiB used: 10.35 GiB (9.4%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-10: /var/lib/docker/overlay2/be330835171d9d766eb1841c4f6c92460402f696da222c00474151134a2fe1be/merged raw size: N/A size: 109.74 GiB used: 10.35 GiB (9.4%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-11: /var/lib/docker/overlay2/d33fb9c012b0e2bf7a80d4923001e33b889eeeb7c20383b47620f952f768b8ed/merged raw size: N/A size: 109.74 GiB used: 10.35 GiB (9.4%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-12: /var/lib/docker/overlay2/d5cb4767196afe2b36158a8e91edbc94d5104dda5ec9de56f75cb16150b3f1be/merged raw size: N/A size: 109.74 GiB used: 10.35 GiB (9.4%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-13: /var/lib/docker/overlay2/e2430db1484741e1ec6f7b00f91bb4f62f5bd8802bb3be2cc3973b6830f4d936/merged raw size: N/A size: 109.74 GiB used: 10.35 GiB (9.4%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: VIA Labs type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 3.0 speed: 5 Gb/s chip ID: 2109:0711 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 5.8% command: python3 pid: 2323 mem: 112.8 MiB (2.8%) 
           2: cpu: 4.8% command: xorg pid: 30218 mem: 55.8 MiB (1.4%) 
           3: cpu: 2.8% command: lxterminal pid: 30727 mem: 28.0 MiB (0.7%) 
           4: cpu: 1.2% command: pcmanfm pid: 30352 mem: 25.4 MiB (0.6%) 
           5: cpu: 0.7% command: lxpanel pid: 30350 mem: 28.9 MiB (0.7%) 
           Memory top: 5 
           1: mem: 112.8 MiB (2.8%) command: python3 pid: 2323 cpu: 5.8% 
           2: mem: 67.6 MiB (1.7%) command: dockerd pid: 450 cpu: 0.4% 
           3: mem: 55.8 MiB (1.4%) command: xorg pid: 30218 cpu: 4.8% 
           4: mem: 34.2 MiB (0.8%) command: grafana-server pid: 1971 cpu: 0.1% 
           5: mem: 33.5 MiB (0.8%) command: containerd pid: 444 cpu: 0.1% 
Info:      Processes: 254 Uptime: 3h 50m Init: systemd v: 241 target: graphical.target Compilers: 
           gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #18955 - Brand: Generic USB Disk