Benchmark #19053 - pibenchmarks.com

Brand: Undentified JMicron USB to SATA Adapter
SSD (2.5" SATA)
#12 / 1,700
928
#432 / 1,700
#416 / 989
#52 / 370
7,564
	Amazon.com AliExpress

Overview
2020-04-18 13:58:43
#19,053
5,214
-2,350 (-45.07%)
dronecz
Intel SSD DC S3500 on Raspberry Pi 4 (4GB RAM) using Noname SATA to USB 3 adapter pluged to USB 3.0 port

Storage Details
Undentified JMicron USB to SATA Adapter
SSD (2.5" SATA)
SSD
JMicron
JMicronTech
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
aarch64

Benchmark Results
77.9 MB/s
4,760 IOPS
3,623 IOPS
19,042 KB/s
14,493 KB/s
21,882 KB/s
22,301 KB/s
17,848 KB/s
26,498 KB/s

inxi Results
System: Kernel: 4.19.75v64 aarch64 bits: 32 compiler: gcc v: 7.4.0 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 usb-storage.quirks=152d:0578:u elevator=deadline quiet bootmenutimeout=10 datadev=UUID=1a2d40df-dad5-4f03-a196-905d21e6c5aa qmap=cz Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.79 GiB used: 398.9 MiB (10.3%) gpu: 160.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr tty: 237x64 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75v64 Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 119.10 GiB used: 94.5 MiB (0.1%) ID-1: /dev/mmcblk0 model: USDU1 size: 7.31 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: JMicron Tech model: N/A drive vendor: Intel drive model: SSDSC2BB120G4 family: 730 and DC S35x0/3610/3700 Series SSDs size: 111.79 GiB block size: physical: 4096 B logical: 512 B sata: 2.6 speed: 6.0 Gb/s rev: 3202 drive rev: D2010370 scheme: MBR SMART: yes state: enabled health: PASSED on: 251d 16h cycles: 1220 read: 1.70 TiB written: 6.34 TiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: /boot raw size: 7.31 GiB size: 7.29 GiB (99.79%) used: 67.5 MiB (0.9%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: NOV\xed SVAZEK uuid: 2423-D06A ID-2: /media/pi/Boot raw size: 127.0 MiB size: 100.0 MiB (78.74%) used: 27.0 MiB (27.0%) fs: ntfs block size: 4096 B dev: /dev/sda1 label: Boot uuid: 3AC06632C065F493 Unmounted: ID-1: /dev/sda2 size: 111.67 GiB fs: ext4 label: berryboot uuid: 1a2d40df-dad5-4f03-a196-905d21e6c5aa USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: Logitech Unifying Receiver type: Mouse,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c52f Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-2:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 4.9% command: [usb-storage] pid: 98 mem: 0.00 MiB (0.0%) 2: cpu: 3.1% command: lib/systemd/systemd pid: 1 mem: 8.01 MiB (0.2%) 3: cpu: 1.8% command: xorg pid: 544 mem: 45.9 MiB (1.2%) 4: cpu: 1.5% command: lxpanel pid: 655 mem: 28.0 MiB (0.7%) 5: cpu: 0.9% command: pcmanfm pid: 662 mem: 20.5 MiB (0.5%) Memory top: 5 1: mem: 45.9 MiB (1.2%) command: xorg pid: 544 cpu: 1.8% 2: mem: 28.0 MiB (0.7%) command: lxpanel pid: 655 cpu: 1.5% 3: mem: 20.5 MiB (0.5%) command: pcmanfm pid: 662 cpu: 0.9% 4: mem: 15.0 MiB (0.4%) command: openbox pid: 650 cpu: 0.2% 5: mem: 12.6 MiB (0.3%) command: packagekitd pid: 1161 cpu: 0.1% Info: Processes: 162 Uptime: 1m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.75v64 aarch64 bits: 32 compiler: gcc v: 7.4.0 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 usb-storage.quirks=152d:0578:u elevator=deadline quiet 
           bootmenutimeout=10 datadev=UUID=1a2d40df-dad5-4f03-a196-905d21e6c5aa qmap=cz 
           Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.79 GiB used: 398.9 MiB (10.3%) gpu: 160.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 
           family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr 
           tty: 237x64 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.75v64 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac:  
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 119.10 GiB used: 94.5 MiB (0.1%) 
           ID-1: /dev/mmcblk0 model: USDU1 size: 7.31 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: JMicron Tech model: N/A drive vendor: Intel 
           drive model: SSDSC2BB120G4 family: 730 and DC S35x0/3610/3700 Series SSDs 
           size: 111.79 GiB block size: physical: 4096 B logical: 512 B sata: 2.6 speed: 6.0 Gb/s 
           rev: 3202 drive rev: D2010370 scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 251d 16h cycles: 1220 read: 1.70 TiB 
           written: 6.34 TiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: /boot raw size: 7.31 GiB size: 7.29 GiB (99.79%) used: 67.5 MiB (0.9%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p1 label: NOV\xed SVAZEK uuid: 2423-D06A 
           ID-2: /media/pi/Boot raw size: 127.0 MiB size: 100.0 MiB (78.74%) 
           used: 27.0 MiB (27.0%) fs: ntfs block size: 4096 B dev: /dev/sda1 label: Boot 
           uuid: 3AC06632C065F493 
Unmounted: ID-1: /dev/sda2 size: 111.67 GiB fs: ext4 label: berryboot 
           uuid: 1a2d40df-dad5-4f03-a196-905d21e6c5aa 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: Logitech Unifying Receiver type: Mouse,HID 
           driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c52f 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-2: 2-2:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 
           Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 4.9% command: [usb-storage] pid: 98 mem: 0.00 MiB (0.0%) 
           2: cpu: 3.1% command: lib/systemd/systemd pid: 1 mem: 8.01 MiB (0.2%) 
           3: cpu: 1.8% command: xorg pid: 544 mem: 45.9 MiB (1.2%) 
           4: cpu: 1.5% command: lxpanel pid: 655 mem: 28.0 MiB (0.7%) 
           5: cpu: 0.9% command: pcmanfm pid: 662 mem: 20.5 MiB (0.5%) 
           Memory top: 5 
           1: mem: 45.9 MiB (1.2%) command: xorg pid: 544 cpu: 1.8% 
           2: mem: 28.0 MiB (0.7%) command: lxpanel pid: 655 cpu: 1.5% 
           3: mem: 20.5 MiB (0.5%) command: pcmanfm pid: 662 cpu: 0.9% 
           4: mem: 15.0 MiB (0.4%) command: openbox pid: 650 cpu: 0.2% 
           5: mem: 12.6 MiB (0.3%) command: packagekitd pid: 1161 cpu: 0.1% 
Info:      Processes: 162 Uptime: 1m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #19053 - Brand: Undentified JMicron USB to SATA Adapter