Benchmark #19198 - pibenchmarks.com

Brand: Zheino mSATA M3
SSD (mSATA)
#786 / 1,672
6
#633 / 1,672
#611 / 983
#23 / 69
6,270
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.sg

Overview
2020-04-19 04:54:42
#19,198
8,256
+1,986 (+24.06%)
maxmopp
Zhenio 256GB

Storage Details
Zheino mSATA M3
SSD (mSATA)
256G
SSD
CHN
mSATAM3256
2.5 inch
SATA
1d6b:9561
0x1d6b (Linux Foundation)
0x9561
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
184 MB/s
291.85 MB/s
256.91 MB/s
11,377 IOPS
22,021 IOPS
45,511 KB/s
88,086 KB/s
29,909 KB/s
29,333 KB/s
16,302 KB/s
31,096 KB/s

inxi Results
System: Host: jplotter1 Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M video=HDMI-A-1:1280x720M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=55d55d00-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: N/A dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 294.8 MiB (7.4%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr tty: 231x32 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::1ff0:19c6:c4c1:45cc/64 scope: link IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: 80.110.X.X Drives: Local Storage: total: 240.31 GiB used: 3.01 GiB (1.3%) ID-1: /dev/mmcblk0 model: SD2GB size: 1.83 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB model: P1 256G drive model: CHN mSATAM3 256 size: 238.47 GiB block size: physical: 4096 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s drive rev: 1507 drive rev: S0628A0 temp: 45 C scheme: MBR SMART: yes state: enabled health: PASSED cycles: 48 read: 170 KiB written: 300 KiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 238.22 GiB size: 234.53 GiB (98.45%) used: 2.91 GiB (1.2%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 6341-C9E5 ID-3: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.4 MiB (20.8%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 6341-C9E5 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: Jing-Mold Enterprise type: Keyboard,Mouse,HID driver: hid-generic,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 05af:0906 Device-2: 1-1.4:4 info: Elan Micro type: HID driver: hid-multitouch,usbhid interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 04f3:249f Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-3: 2-2:2 info: JMicron / JMicron USA type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 152d:9561 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 1.2% command: init pid: 1 mem: 8.02 MiB (0.2%) 2: cpu: 0.7% command: smartd pid: 1521 mem: 3.18 MiB (0.0%) 3: cpu: 0.4% command: xorg pid: 526 mem: 45.9 MiB (1.1%) 4: cpu: 0.3% command: [kworker/u8:2-events_unbound] pid: 1024 mem: 0.00 MiB (0.0%) 5: cpu: 0.3% command: packagekitd pid: 1196 mem: 12.7 MiB (0.3%) Memory top: 5 1: mem: 45.9 MiB (1.1%) command: xorg pid: 526 cpu: 0.4% 2: mem: 27.8 MiB (0.7%) command: lxpanel pid: 644 cpu: 0.2% 3: mem: 21.7 MiB (0.5%) command: pcmanfm pid: 647 cpu: 0.2% 4: mem: 14.0 MiB (0.3%) command: openbox pid: 641 cpu: 0.0% 5: mem: 13.5 MiB (0.3%) command: vncserver-x11-core pid: 489 cpu: 0.0% Info: Processes: 171 Uptime: 7m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) inxi: 3.0.38

inxi Results

System:    Host: jplotter1 Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M 
           video=HDMI-A-1:1280x720M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 
           console=tty1 root=PARTUUID=55d55d00-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Console: N/A dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
Memory:    RAM: total: 3.89 GiB used: 294.8 MiB (7.4%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A 
           stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr tty: 231x32 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: fe80::1ff0:19c6:c4c1:45cc/64 scope: link 
           IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX 
           WAN IP: 80.110.X.X 
Drives:    Local Storage: total: 240.31 GiB used: 3.01 GiB (1.3%) 
           ID-1: /dev/mmcblk0 model: SD2GB size: 1.83 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB model: P1 256G drive model: CHN mSATAM3 256 size: 238.47 GiB block size: physical: 4096 B 
           logical: 512 B sata: 3.2 speed: 6.0 Gb/s drive rev: 1507 
           drive rev: S0628A0 temp: 45 C scheme: MBR 
           SMART: yes state: enabled health: PASSED cycles: 48 read: 170 KiB written: 300 KiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 238.22 GiB size: 234.53 GiB (98.45%) used: 2.91 GiB (1.2%) fs: ext4 block size: 4096 B 
           dev: /dev/sda2 label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B 
           dev: /dev/mmcblk0p1 label: boot uuid: 6341-C9E5 
           ID-3: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.4 MiB (20.8%) fs: vfat block size: 512 B 
           dev: /dev/sda1 label: boot uuid: 6341-C9E5 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: Jing-Mold Enterprise type: Keyboard,Mouse,HID driver: hid-generic,usbhid interfaces: 3 
           rev: 2.0 speed: 12 Mb/s chip ID: 05af:0906 
           Device-2: 1-1.4:4 info: Elan Micro type: HID driver: hid-multitouch,usbhid interfaces: 1 rev: 2.0 speed: 12 Mb/s 
           chip ID: 04f3:249f 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 
           Device-3: 2-2:2 info: JMicron / JMicron USA type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s 
           chip ID: 152d:9561 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 1.2% command: init pid: 1 mem: 8.02 MiB (0.2%) 
           2: cpu: 0.7% command: smartd pid: 1521 mem: 3.18 MiB (0.0%) 
           3: cpu: 0.4% command: xorg pid: 526 mem: 45.9 MiB (1.1%) 
           4: cpu: 0.3% command: [kworker/u8:2-events_unbound] pid: 1024 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.3% command: packagekitd pid: 1196 mem: 12.7 MiB (0.3%) 
           Memory top: 5 
           1: mem: 45.9 MiB (1.1%) command: xorg pid: 526 cpu: 0.4% 
           2: mem: 27.8 MiB (0.7%) command: lxpanel pid: 644 cpu: 0.2% 
           3: mem: 21.7 MiB (0.5%) command: pcmanfm pid: 647 cpu: 0.2% 
           4: mem: 14.0 MiB (0.3%) command: openbox pid: 641 cpu: 0.0% 
           5: mem: 13.5 MiB (0.3%) command: vncserver-x11-core pid: 489 cpu: 0.0% 
Info:      Processes: 171 Uptime: 7m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 
           Shell: Storage.sh (sudo) inxi: 3.0.38

Benchmark #19198 - Brand: Zheino mSATA M3