Benchmark #19304 - pibenchmarks.com

Brand: Seagate Momentus
HDD (2.5" SATA)
#104 / 1,679
175
#1,196 / 1,679
#45 / 69
#8 / 20
1,478
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se

Overview
2020-04-19 14:31:50
#19,304
1,392
-86 (-6.18%)
kosssi
Samsung M3 Portable 1To on Pi 4 using Ubuntu 20.04 beta 32-bit

Storage Details
Seagate Momentus
HDD (2.5" SATA)
1000G
HDD
Seagate
ST1000LM025HN-M101ABB
2.5 inch
SATA
5,400
3.00
5,000
1d6b:61b6
0x1d6b (Linux Foundation)
0x61b6 (M3 Portable Hard Drive 1TB)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Ubuntu 20.04 LTS
armv7l

Benchmark Results
97.1 MB/s
114.12 MB/s
197.79 MB/s
284 IOPS
163 IOPS
1,136 KB/s
654 KB/s
11,665 KB/s
14,226 KB/s
509 KB/s
850 KB/s

inxi Results
System: Kernel: 5.4.0-1006-raspi2 armv7l bits: 32 compiler: gcc v: 9.3.0 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 net.ifnames=0 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline rootwait fixrtc quiet splash Console: tty 0 dm: N/A Distro: Ubuntu 20.04 LTS (Focal Fossa) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 rev: c03111 Memory: RAM: total: 3.73 GiB used: 296.4 MiB (7.8%) RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 150x39 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Message: No Device data found. Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 1.27 TiB used: 2.14 GiB (0.2%) ID-1: /dev/mmcblk0 vendor: Micron model: SC400 size: 366.82 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Samsung model: 1 M3 Portable drive vendor: Seagate drive model: ST1000LM025 HN-M101ABB family: Seagate SpinPoint M8U (USB) size: 931.51 GiB block size: physical: 4096 B logical: 512 B sata: 3.0 speed: 3.0 Gb/s rotation: 5400 rpm rev: 1306 drive rev: 2BA30002 temp: 31 C scheme: MBR SMART: yes state: enabled health: PASSED on: 16d 3h cycles: 293 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 931.26 GiB size: 916.67 GiB (98.43%) used: 2.05 GiB (0.2%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: writable uuid: ebe7ce0e-4298-42bb-b5c4-42aaf3dc8858 ID-2: /boot/firmware raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 90.7 MiB (36.0%) fs: vfat block size: 512 B dev: /dev/sda1 label: system-boot uuid: 8F6C-2096 ID-3: /snap/core/8936 raw size: 79.9 MiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop1 label: N/A uuid: N/A ID-4: /snap/lxd/14135 raw size: 53.3 MiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop0 label: N/A uuid: N/A Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: system-boot uuid: 8F6C-2096 ID-2: /dev/mmcblk0p2 size: 366.57 GiB fs: ext4 label: writable uuid: ebe7ce0e-4298-42bb-b5c4-42aaf3dc8858 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: Dell Optical 5-Button Wheel Mouse type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s chip ID: 413c:3016 Device-2: 1-1.4:4 info: HP KU-0316 Keyboard type: Keyboard driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s chip ID: 03f0:0024 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-3: 2-2:2 info: Samsung M3 Portable Hard Drive 1TB type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 04e8:61b6 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //ports.ubuntu.com/ubuntu-ports focal main restricted 2: deb http: //ports.ubuntu.com/ubuntu-ports focal-updates main restricted 3: deb http: //ports.ubuntu.com/ubuntu-ports focal universe 4: deb http: //ports.ubuntu.com/ubuntu-ports focal-updates universe 5: deb http: //ports.ubuntu.com/ubuntu-ports focal multiverse 6: deb http: //ports.ubuntu.com/ubuntu-ports focal-updates multiverse 7: deb http: //ports.ubuntu.com/ubuntu-ports focal-backports main restricted universe multiverse 8: deb http: //ports.ubuntu.com/ubuntu-ports focal-security main restricted 9: deb http: //ports.ubuntu.com/ubuntu-ports focal-security universe 10: deb http: //ports.ubuntu.com/ubuntu-ports focal-security multiverse Active apt repos in: /etc/apt/sources.list.d/ubuntu-raspi2-ubuntu-ppa-focal.list 1: deb http: //ppa.launchpad.net/ubuntu-raspi2/ppa/ubuntu focal main Processes: CPU top: 5 1: cpu: 6.8% command: systemd pid: 1 mem: 9.68 MiB (0.2%) 2: cpu: 0.6% command: dbus-daemon pid: 1218 mem: 3.34 MiB (0.0%) 3: cpu: 0.4% command: snapd pid: 11787 mem: 19.7 MiB (0.5%) 4: cpu: 0.3% command: systemd-logind pid: 1227 mem: 5.09 MiB (0.1%) 5: cpu: 0.2% command: [rcu_sched] pid: 10 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 19.7 MiB (0.5%) command: snapd pid: 11787 cpu: 0.4% 2: mem: 13.8 MiB (0.3%) command: multipathd pid: 7251 cpu: 0.0% 3: mem: 13.8 MiB (0.3%) command: unattended-upgrade-shutdown started by: python3 pid: 1271 cpu: 0.0% 4: mem: 11.6 MiB (0.3%) command: networkd-dispatcher started by: python3 pid: 1222 cpu: 0.0% 5: mem: 10.8 MiB (0.2%) command: packagekitd pid: 4268 cpu: 0.0% Info: Processes: 135 Uptime: 18m Init: systemd v: 245 runlevel: 5 Compilers: gcc: N/A Client: shell wrapper v: 5.0.16-release inxi: 3.0.38

inxi Results

System:    Kernel: 5.4.0-1006-raspi2 armv7l bits: 32 compiler: gcc v: 9.3.0 
           parameters:  coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=1824 
           bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 net.ifnames=0 
           dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 
           rootfstype=ext4 elevator=deadline rootwait fixrtc quiet splash 
           Console: tty 0 dm: N/A Distro: Ubuntu 20.04 LTS (Focal Fossa) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 rev: c03111 
           Memory:    RAM: total: 3.73 GiB used: 296.4 MiB (7.8%) 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 150x39 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Message: No Device data found. 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 1.27 TiB used: 2.14 GiB (0.2%) 
           ID-1: /dev/mmcblk0 vendor: Micron model: SC400 size: 366.82 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Samsung model: 1 M3 Portable drive vendor: Seagate 
           drive model: ST1000LM025 HN-M101ABB family: Seagate SpinPoint M8U (USB) 
           size: 931.51 GiB block size: physical: 4096 B logical: 512 B sata: 3.0 speed: 3.0 Gb/s 
           rotation: 5400 rpm rev: 1306 
           drive rev: 2BA30002 temp: 31 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 16d 3h cycles: 293 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 931.26 GiB size: 916.67 GiB (98.43%) used: 2.05 GiB (0.2%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: writable 
           uuid: ebe7ce0e-4298-42bb-b5c4-42aaf3dc8858 
           ID-2: /boot/firmware raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
           used: 90.7 MiB (36.0%) fs: vfat block size: 512 B dev: /dev/sda1 label: system-boot 
           uuid: 8F6C-2096 
           ID-3: /snap/core/8936 raw size: 79.9 MiB size: N/A (hidden?) used: N/A (hidden?) 
           fs: squashfs dev: /dev/loop1 label: N/A uuid: N/A 
           ID-4: /snap/lxd/14135 raw size: 53.3 MiB size: N/A (hidden?) used: N/A (hidden?) 
           fs: squashfs dev: /dev/loop0 label: N/A uuid: N/A 
Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: system-boot uuid: 8F6C-2096 
           ID-2: /dev/mmcblk0p2 size: 366.57 GiB fs: ext4 label: writable 
           uuid: ebe7ce0e-4298-42bb-b5c4-42aaf3dc8858 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: Dell Optical 5-Button Wheel Mouse type: Mouse 
           driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s chip ID: 413c:3016 
           Device-2: 1-1.4:4 info: HP KU-0316 Keyboard type: Keyboard driver: hid-generic,usbhid 
           interfaces: 1 rev: 2.0 speed: 1.5 Mb/s chip ID: 03f0:0024 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-3: 2-2:2 info: Samsung M3 Portable Hard Drive 1TB type: Mass Storage driver: uas 
           interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 04e8:61b6 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //ports.ubuntu.com/ubuntu-ports focal main restricted
           2: deb http: //ports.ubuntu.com/ubuntu-ports focal-updates main restricted
           3: deb http: //ports.ubuntu.com/ubuntu-ports focal universe
           4: deb http: //ports.ubuntu.com/ubuntu-ports focal-updates universe
           5: deb http: //ports.ubuntu.com/ubuntu-ports focal multiverse
           6: deb http: //ports.ubuntu.com/ubuntu-ports focal-updates multiverse
           7: deb http: //ports.ubuntu.com/ubuntu-ports focal-backports main restricted universe multiverse
           8: deb http: //ports.ubuntu.com/ubuntu-ports focal-security main restricted
           9: deb http: //ports.ubuntu.com/ubuntu-ports focal-security universe
           10: deb http: //ports.ubuntu.com/ubuntu-ports focal-security multiverse
           Active apt repos in: /etc/apt/sources.list.d/ubuntu-raspi2-ubuntu-ppa-focal.list 
           1: deb http: //ppa.launchpad.net/ubuntu-raspi2/ppa/ubuntu focal main
Processes: CPU top: 5 
           1: cpu: 6.8% command: systemd pid: 1 mem: 9.68 MiB (0.2%) 
           2: cpu: 0.6% command: dbus-daemon pid: 1218 mem: 3.34 MiB (0.0%) 
           3: cpu: 0.4% command: snapd pid: 11787 mem: 19.7 MiB (0.5%) 
           4: cpu: 0.3% command: systemd-logind pid: 1227 mem: 5.09 MiB (0.1%) 
           5: cpu: 0.2% command: [rcu_sched] pid: 10 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 19.7 MiB (0.5%) command: snapd pid: 11787 cpu: 0.4% 
           2: mem: 13.8 MiB (0.3%) command: multipathd pid: 7251 cpu: 0.0% 
           3: mem: 13.8 MiB (0.3%) command: unattended-upgrade-shutdown started by: python3 
           pid: 1271 cpu: 0.0% 
           4: mem: 11.6 MiB (0.3%) command: networkd-dispatcher started by: python3 pid: 1222 
           cpu: 0.0% 
           5: mem: 10.8 MiB (0.2%) command: packagekitd pid: 4268 cpu: 0.0% 
Info:      Processes: 135 Uptime: 18m Init: systemd v: 245 runlevel: 5 Compilers: gcc: N/A 
           Client: shell wrapper v: 5.0.16-release inxi: 3.0.38

Benchmark #19304 - Brand: Seagate Momentus