Benchmark #19397 - pibenchmarks.com

Brand: Samsung Fit Plus
USB Flash
#35 / 1,539
294
#897 / 1,539
#9 / 90
#12 / 86
2,818
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-20 00:30:29
#19,397
3,585
+767 (+21.39%)
Anonymous
Samsung FIT USB 3.0 Flash Drive on Pi 4

Storage Details
Samsung Fit Plus
USB Flash
4584720G
USB Flash
Samsung
FlashDriveFIT
3.10
5,000
090c:1000
0x090c
0x1000 (Mustek BearPaw 1200 Scanner)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Ubuntu 18.04.4 LTS
armv7l

Benchmark Results
49.9 MB/s
110.36 MB/s
171.08 MB/s
4,838 IOPS
2,589 IOPS
19,352 KB/s
10,356 KB/s
10,789 KB/s
14,990 KB/s
8,769 KB/s
18,877 KB/s

inxi Results
System: Kernel: 5.3.0-1022-raspi2 armv7l bits: 32 compiler: gcc v: 7.5.0 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 net.ifnames=0 dwc_otg.lpm_enable=0 console=tty1 root=/dev/sda2 rootfstype=ext4 elevator=deadline rootwait fixrtc Console: tty 0 wm: gnome-shell dm: GDM3 3.28.3 Distro: Ubuntu 18.04.4 LTS (Bionic Beaver) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.81 GiB used: 820.9 MiB (21.1%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.19.6 driver: fbdev,modesetting compositor: gnome-shell resolution: 1364x768~50Hz OpenGL: renderer: llvmpipe (LLVM 9.0 128 bits) v: 3.3 Mesa 19.2.8 compat-v: 3.1 direct render: Yes Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic noprefixroute scope: global IP v6: type: dynamic noprefixroute scope: global IP v6: type: noprefixroute scope: link WAN IP: No WAN IP data found. Connected to the web? SSL issues? Drives: Local Storage: total: 179.13 GiB used: 11.25 GiB (6.3%) ID-1: /dev/mmcblk0 model: EC2QT size: 59.62 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Samsung model: Flash Drive FIT size: 119.51 GiB block size: physical: 512 B logical: 512 B rev: 1100 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 119.26 GiB size: 116.88 GiB (98.01%) used: 11.20 GiB (9.6%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: N/A uuid: 58efe194-a644-4e34-939a-a7b6c3f22628 ID-2: /boot/firmware raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.8 MiB (20.6%) fs: vfat block size: 512 B dev: /dev/sda1 label: system-boot uuid: 7297-5AF9 ID-3: /snap/bluez/206 raw size: 3.9 MiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop0 label: N/A uuid: N/A ID-4: /snap/core/8936 raw size: 79.9 MiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop1 label: N/A uuid: N/A Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: system-boot uuid: 7297-5AF9 ID-2: /dev/mmcblk0p2 size: 59.37 GiB fs: ext4 label: writable uuid: 6d33dc75-68ae-4697-b3c3-3dfa0473150a USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: Silicon Motion - Taiwan (formerly Feiya ) Flash Drive type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 090c:1000 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //ports.ubuntu.com/ubuntu-ports bionic main restricted 2: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates main restricted 3: deb http: //ports.ubuntu.com/ubuntu-ports bionic universe 4: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates universe 5: deb http: //ports.ubuntu.com/ubuntu-ports bionic multiverse 6: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates multiverse 7: deb http: //ports.ubuntu.com/ubuntu-ports bionic-backports main restricted universe multiverse 8: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security main restricted 9: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security universe 10: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security multiverse Active apt repos in: /etc/apt/sources.list.d/ubuntu-raspi2-ubuntu-ppa-bionic.list 1: deb http: //ppa.launchpad.net/ubuntu-raspi2/ppa/ubuntu bionic main Processes: CPU top: 5 1: cpu: 3.5% command: gnome-shell pid: 16364 mem: 249.8 MiB (6.5%) 2: cpu: 1.1% command: [kworker/u8:3-ev] pid: 18712 mem: 0.00 MiB (0.0%) 3: cpu: 1.0% command: dbus-daemon pid: 1478 mem: 3.90 MiB (0.1%) 4: cpu: 0.9% command: init pid: 1 mem: 7.56 MiB (0.1%) 5: cpu: 0.9% command: packagekitd pid: 16470 mem: 13.6 MiB (0.3%) Memory top: 5 1: mem: 249.8 MiB (6.5%) command: gnome-shell pid: 16364 cpu: 3.5% 2: mem: 110.7 MiB (2.8%) command: systemd-journald pid: 770 cpu: 0.5% 3: mem: 107.5 MiB (2.8%) command: gnome-software pid: 16696 cpu: 0.6% 4: mem: 53.8 MiB (1.4%) command: xorg pid: 16244 cpu: 0.6% 5: mem: 53.4 MiB (1.3%) command: evolution-calendar-factory pid: 16604 cpu: 0.0% Info: Processes: 223 Uptime: 55m Init: systemd v: 237 runlevel: 5 Compilers: gcc: N/A Client: shell wrapper v: 4.4.20-release inxi: 3.0.38

inxi Results

System:    Kernel: 5.3.0-1022-raspi2 armv7l bits: 32 compiler: gcc v: 7.5.0 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M bcm2708_fb.fbwidth=0 
           bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 net.ifnames=0 
           dwc_otg.lpm_enable=0 console=tty1 root=/dev/sda2 rootfstype=ext4 elevator=deadline 
           rootwait fixrtc 
           Console: tty 0 wm: gnome-shell dm: GDM3 3.28.3 
           Distro: Ubuntu 18.04.4 LTS (Bionic Beaver) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.81 GiB used: 820.9 MiB (21.1%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.19.6 driver: fbdev,modesetting compositor: gnome-shell 
           resolution: 1364x768~50Hz 
           OpenGL: renderer: llvmpipe (LLVM 9.0 128 bits) v: 3.3 Mesa 19.2.8 compat-v: 3.1 
           direct render: Yes 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac:  
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic noprefixroute scope: global 
           IP v6:  type: dynamic noprefixroute scope: global 
           IP v6:  type: noprefixroute scope: link 
           WAN IP: No WAN IP data found. Connected to the web? SSL issues? 
Drives:    Local Storage: total: 179.13 GiB used: 11.25 GiB (6.3%) 
           ID-1: /dev/mmcblk0 model: EC2QT size: 59.62 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Samsung model: Flash Drive FIT size: 119.51 GiB 
           block size: physical: 512 B logical: 512 B rev: 1100 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 119.26 GiB size: 116.88 GiB (98.01%) used: 11.20 GiB (9.6%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: N/A uuid: 58efe194-a644-4e34-939a-a7b6c3f22628 
           ID-2: /boot/firmware raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
           used: 51.8 MiB (20.6%) fs: vfat block size: 512 B dev: /dev/sda1 label: system-boot 
           uuid: 7297-5AF9 
           ID-3: /snap/bluez/206 raw size: 3.9 MiB size: N/A (hidden?) used: N/A (hidden?) 
           fs: squashfs dev: /dev/loop0 label: N/A uuid: N/A 
           ID-4: /snap/core/8936 raw size: 79.9 MiB size: N/A (hidden?) used: N/A (hidden?) 
           fs: squashfs dev: /dev/loop1 label: N/A uuid: N/A 
Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: system-boot uuid: 7297-5AF9 
           ID-2: /dev/mmcblk0p2 size: 59.37 GiB fs: ext4 label: writable 
           uuid: 6d33dc75-68ae-4697-b3c3-3dfa0473150a 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: Silicon Motion - Taiwan (formerly Feiya ) Flash Drive 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s 
           chip ID: 090c:1000 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //ports.ubuntu.com/ubuntu-ports bionic main restricted
           2: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates main restricted
           3: deb http: //ports.ubuntu.com/ubuntu-ports bionic universe
           4: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates universe
           5: deb http: //ports.ubuntu.com/ubuntu-ports bionic multiverse
           6: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates multiverse
           7: deb http: //ports.ubuntu.com/ubuntu-ports bionic-backports main restricted universe multiverse
           8: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security main restricted
           9: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security universe
           10: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security multiverse
           Active apt repos in: /etc/apt/sources.list.d/ubuntu-raspi2-ubuntu-ppa-bionic.list 
           1: deb http: //ppa.launchpad.net/ubuntu-raspi2/ppa/ubuntu bionic main
Processes: CPU top: 5 
           1: cpu: 3.5% command: gnome-shell pid: 16364 mem: 249.8 MiB (6.5%) 
           2: cpu: 1.1% command: [kworker/u8:3-ev] pid: 18712 mem: 0.00 MiB (0.0%) 
           3: cpu: 1.0% command: dbus-daemon pid: 1478 mem: 3.90 MiB (0.1%) 
           4: cpu: 0.9% command: init pid: 1 mem: 7.56 MiB (0.1%) 
           5: cpu: 0.9% command: packagekitd pid: 16470 mem: 13.6 MiB (0.3%) 
           Memory top: 5 
           1: mem: 249.8 MiB (6.5%) command: gnome-shell pid: 16364 cpu: 3.5% 
           2: mem: 110.7 MiB (2.8%) command: systemd-journald pid: 770 cpu: 0.5% 
           3: mem: 107.5 MiB (2.8%) command: gnome-software pid: 16696 cpu: 0.6% 
           4: mem: 53.8 MiB (1.4%) command: xorg pid: 16244 cpu: 0.6% 
           5: mem: 53.4 MiB (1.3%) command: evolution-calendar-factory pid: 16604 cpu: 0.0% 
Info:      Processes: 223 Uptime: 55m Init: systemd v: 237 runlevel: 5 Compilers: gcc: N/A 
           Client: shell wrapper v: 4.4.20-release inxi: 3.0.38

Benchmark #19397 - Brand: Samsung Fit Plus