Benchmark #19426 - pibenchmarks.com

Brand: SanDisk Extreme Pro SSD
SSD (2.5" SATA)
#150 / 1,539
71
#431 / 1,539
#413 / 875
#91 / 363
6,593
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-20 03:27:13
#19,426
5,662
-931 (-16.44%)
hporter
SD Card

Storage Details
SanDisk Extreme Pro SSD
SSD (2.5" SATA)
120G
SSD
SanDisk
SDSSDX120GG25
SATA
1d6b:a001
0x1d6b (Linux Foundation)
0xa001 (JMS578 based SATA bridge)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
aarch64

Benchmark Results
124 MB/s
253.28 MB/s
233.03 MB/s
6,576 IOPS
5,413 IOPS
26,307 KB/s
21,654 KB/s
24,178 KB/s
23,696 KB/s
20,698 KB/s
22,117 KB/s

inxi Results
System: Kernel: 4.19.114-v8+ aarch64 bits: 32 compiler: gcc v: 5.4.0 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 usb-storage.quirks=0080:a001:u console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.79 GiB used: 524.0 MiB (13.5%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 204x52 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.114-v8+ Network: Message: No ARM data found for this feature. IF-ID-1: br-0749633c8b2b state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: br-f65e9ac6e80b state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-3: docker0 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-4: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-5: veth048a63f state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth114da86 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth25cb7b8 state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: veth50c6b25 state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: veth67c2540 state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: vethde11b11 state: up speed: 10000 Mbps duplex: full mac: IF-ID-11: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 140.90 GiB used: 19.00 GiB (13.5%) ID-1: /dev/mmcblk0 model: SD32G size: 29.11 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB model: TO Exter nal USB 3.0 size: 111.79 GiB block size: physical: 512 B logical: 512 B rev: 0204 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 111.54 GiB size: 109.74 GiB (98.39%) used: 9.47 GiB (8.6%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.5 MiB (20.8%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9969-E3D2 ID-3: /var/lib/docker/overlay2/22a8faa267cca43f36c4dd0187f5486dfbd450a57897bcd9c6e4b26d77557001/merged raw size: N/A size: 109.74 GiB used: 9.47 GiB (8.6%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-4: /var/lib/docker/overlay2/2e8fff2485022816de613610e5efd92351afa42cb8d57f7ac1f18051b5d3f693/merged raw size: N/A size: 109.74 GiB used: 9.47 GiB (8.6%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-5: /var/lib/docker/overlay2/a96143e306fed10c4a9a5bf70280d918b244070215aadcd29d172395cc6d65ca/merged raw size: N/A size: 109.74 GiB used: 9.47 GiB (8.6%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-6: /var/lib/docker/overlay2/bda9ce80042ccc23b9dc289907b334378dad3f8f1e1d5870fc68a1823aa00b59/merged raw size: N/A size: 109.74 GiB used: 9.47 GiB (8.6%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-7: /var/lib/docker/overlay2/db26a6fc7d92d99dceed9d3f701cdfebc7411ea8e86c31d27369316729cd5f48/merged raw size: N/A size: 109.74 GiB used: 9.47 GiB (8.6%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-8: /var/lib/docker/overlay2/de405145a70110414ca097d2df6f41d514f439ca25c06baede5d9d750a51e73e/merged raw size: N/A size: 109.74 GiB used: 9.47 GiB (8.6%) fs: overlay source: ERR-102 label: N/A uuid: N/A Unmounted: ID-1: /dev/mmcblk0p2 size: 28.86 GiB fs: ext4 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 9969-E3D2 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0080:a001 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/pivpn-bullseye.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ bullseye main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.7% command: boinc pid: 404 mem: 12.1 MiB (0.3%) 2: cpu: 0.7% command: packagekitd pid: 5676 mem: 12.6 MiB (0.3%) 3: cpu: 0.5% command: init pid: 1 mem: 8.01 MiB (0.2%) 4: cpu: 0.5% command: dockerd pid: 432 mem: 66.2 MiB (1.7%) 5: cpu: 0.5% command: node-red pid: 2604 mem: 56.9 MiB (1.4%) Memory top: 5 1: mem: 66.2 MiB (1.7%) command: dockerd pid: 432 cpu: 0.5% 2: mem: 56.9 MiB (1.4%) command: node-red pid: 2604 cpu: 0.5% 3: mem: 56.7 MiB (1.4%) command: mysqld pid: 2550 cpu: 0.1% 4: mem: 34.0 MiB (0.8%) command: npm pid: 1075 cpu: 0.1% 5: mem: 32.5 MiB (0.8%) command: containerd pid: 430 cpu: 0.3% Info: Processes: 182 Uptime: 13m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.114-v8+ aarch64 bits: 32 compiler: gcc v: 5.4.0 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 usb-storage.quirks=0080:a001:u console=ttyS0,115200 
           console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline 
           fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles 
           Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.79 GiB used: 524.0 MiB (13.5%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 
           family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 status: Vulnerable 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 204x52 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.114-v8+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: br-0749633c8b2b state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: br-f65e9ac6e80b state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-3: docker0 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-4: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-5: veth048a63f state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: veth114da86 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: veth25cb7b8 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-8: veth50c6b25 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-9: veth67c2540 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-10: vethde11b11 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-11: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 140.90 GiB used: 19.00 GiB (13.5%) 
           ID-1: /dev/mmcblk0 model: SD32G size: 29.11 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB model: TO Exter nal USB 3.0 size: 111.79 GiB block size: 
           physical: 512 B logical: 512 B rev: 0204 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 111.54 GiB size: 109.74 GiB (98.39%) used: 9.47 GiB (8.6%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.5 MiB (20.8%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9969-E3D2 
           ID-3: /var/lib/docker/overlay2/22a8faa267cca43f36c4dd0187f5486dfbd450a57897bcd9c6e4b26d77557001/merged raw size: N/A size: 109.74 GiB used: 9.47 GiB (8.6%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-4: /var/lib/docker/overlay2/2e8fff2485022816de613610e5efd92351afa42cb8d57f7ac1f18051b5d3f693/merged raw size: N/A size: 109.74 GiB used: 9.47 GiB (8.6%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-5: /var/lib/docker/overlay2/a96143e306fed10c4a9a5bf70280d918b244070215aadcd29d172395cc6d65ca/merged raw size: N/A size: 109.74 GiB used: 9.47 GiB (8.6%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-6: /var/lib/docker/overlay2/bda9ce80042ccc23b9dc289907b334378dad3f8f1e1d5870fc68a1823aa00b59/merged raw size: N/A size: 109.74 GiB used: 9.47 GiB (8.6%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-7: /var/lib/docker/overlay2/db26a6fc7d92d99dceed9d3f701cdfebc7411ea8e86c31d27369316729cd5f48/merged raw size: N/A size: 109.74 GiB used: 9.47 GiB (8.6%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-8: /var/lib/docker/overlay2/de405145a70110414ca097d2df6f41d514f439ca25c06baede5d9d750a51e73e/merged raw size: N/A size: 109.74 GiB used: 9.47 GiB (8.6%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Unmounted: ID-1: /dev/mmcblk0p2 size: 28.86 GiB fs: ext4 label: rootfs 
           uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 9969-E3D2 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 
           speed: 5 Gb/s chip ID: 0080:a001 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/pivpn-bullseye.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ bullseye main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.7% command: boinc pid: 404 mem: 12.1 MiB (0.3%) 
           2: cpu: 0.7% command: packagekitd pid: 5676 mem: 12.6 MiB (0.3%) 
           3: cpu: 0.5% command: init pid: 1 mem: 8.01 MiB (0.2%) 
           4: cpu: 0.5% command: dockerd pid: 432 mem: 66.2 MiB (1.7%) 
           5: cpu: 0.5% command: node-red pid: 2604 mem: 56.9 MiB (1.4%) 
           Memory top: 5 
           1: mem: 66.2 MiB (1.7%) command: dockerd pid: 432 cpu: 0.5% 
           2: mem: 56.9 MiB (1.4%) command: node-red pid: 2604 cpu: 0.5% 
           3: mem: 56.7 MiB (1.4%) command: mysqld pid: 2550 cpu: 0.1% 
           4: mem: 34.0 MiB (0.8%) command: npm pid: 1075 cpu: 0.1% 
           5: mem: 32.5 MiB (0.8%) command: containerd pid: 430 cpu: 0.3% 
Info:      Processes: 182 Uptime: 13m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #19426 - Brand: SanDisk Extreme Pro SSD