Benchmark #19538 - pibenchmarks.com

Brand: SanDisk SD Extreme Pro A2 (SR64G)
A2 C10 V30 U3
#23 / 1,701
617
#1,225 / 1,701
#112 / 405
1,455
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-20 13:52:17
#19,538
1,192
-263 (-22.06%)
Anonymous
SanDisk Extreme PRO 64GB on Pi 4

Secure Digital (SD) Card Details
SanDisk SD Extreme Pro A2 (SR64G)
A2 C10 V30 U3
59.2G
SD
SanDisk
SR64G
SDXC
6.00
0x03
SD
8.0
01/2020
Class 10
A2
U3
V30

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Ubuntu 18.04.4 LTS
armv7l

Benchmark Results
34.4 MB/s
40 MB/s
36.27 MB/s
929 IOPS
2,834 IOPS
3,719 KB/s
11,339 KB/s
7,328 KB/s
2,013 KB/s
5,996 KB/s
3,050 KB/s

inxi Results
System: Kernel: 5.3.0-1022-raspi2 armv7l bits: 32 compiler: gcc v: 7.5.0 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 net.ifnames=0 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=LABEL=writable rootfstype=ext4 elevator=deadline rootwait fixrtc Console: tty 0 dm: N/A Distro: Ubuntu 18.04.4 LTS (Bionic Beaver) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.81 GiB used: 269.5 MiB (6.9%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 109x30 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: No WAN IP data found. Connected to the web? SSL issues? Drives: Local Storage: total: 59.48 GiB used: 2.11 GiB (3.5%) ID-1: /dev/mmcblk0 model: SR64G size: 59.48 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 59.23 GiB size: 58.28 GiB (98.40%) used: 2.03 GiB (3.5%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: writable uuid: 6d33dc75-68ae-4697-b3c3-3dfa0473150a ID-2: /boot/firmware raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 79.6 MiB (31.6%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: system-boot uuid: 7297-5AF9 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: Logitech Keyboard K120 type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 046d:c31c Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //ports.ubuntu.com/ubuntu-ports bionic main restricted 2: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates main restricted 3: deb http: //ports.ubuntu.com/ubuntu-ports bionic universe 4: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates universe 5: deb http: //ports.ubuntu.com/ubuntu-ports bionic multiverse 6: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates multiverse 7: deb http: //ports.ubuntu.com/ubuntu-ports bionic-backports main restricted universe multiverse 8: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security main restricted 9: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security universe 10: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security multiverse Active apt repos in: /etc/apt/sources.list.d/ubuntu-pi-flavour-makers-ubuntu-ppa-bionic.list 1: deb http: //ppa.launchpad.net/ubuntu-pi-flavour-makers/ppa/ubuntu bionic main Active apt repos in: /etc/apt/sources.list.d/ubuntu-raspi2-ubuntu-ppa-bionic.list 1: deb http: //ppa.launchpad.net/ubuntu-raspi2/ppa/ubuntu bionic main Processes: CPU top: 5 1: cpu: 28.3% command: systemd-journald pid: 753 mem: 24.2 MiB (0.6%) 2: cpu: 20.8% command: rsyslogd pid: 1307 mem: 2.69 MiB (0.0%) 3: cpu: 13.4% command: wpa_supplicant pid: 1319 mem: 1.63 MiB (0.0%) 4: cpu: 2.2% command: init pid: 1 mem: 6.39 MiB (0.1%) 5: cpu: 0.2% command: [kworker/0:1h-mm] pid: 365 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 24.2 MiB (0.6%) command: systemd-journald pid: 753 cpu: 28.3% 2: mem: 13.7 MiB (0.3%) command: unattended-upgrade-shutdown started by: python3 pid: 1340 cpu: 0.0% 3: mem: 11.4 MiB (0.2%) command: networkd-dispatcher started by: python3 pid: 1309 cpu: 0.0% 4: mem: 6.39 MiB (0.1%) command: init pid: 1 cpu: 2.2% 5: mem: 5.07 MiB (0.1%) command: systemd pid: 1444 cpu: 0.0% Info: Processes: 141 Uptime: 6m Init: systemd v: 237 runlevel: 5 Compilers: gcc: N/A Client: shell wrapper v: 4.4.20-release inxi: 3.0.38

inxi Results

System:    Kernel: 5.3.0-1022-raspi2 armv7l bits: 32 compiler: gcc v: 7.5.0 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=1824 
           bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 net.ifnames=0 
           dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=LABEL=writable 
           rootfstype=ext4 elevator=deadline rootwait fixrtc 
           Console: tty 0 dm: N/A Distro: Ubuntu 18.04.4 LTS (Bionic Beaver) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.81 GiB used: 269.5 MiB (6.9%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 109x30 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP: No WAN IP data found. Connected to the web? SSL issues? 
Drives:    Local Storage: total: 59.48 GiB used: 2.11 GiB (3.5%) 
           ID-1: /dev/mmcblk0 model: SR64G size: 59.48 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 59.23 GiB size: 58.28 GiB (98.40%) used: 2.03 GiB (3.5%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: writable 
           uuid: 6d33dc75-68ae-4697-b3c3-3dfa0473150a 
           ID-2: /boot/firmware raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
           used: 79.6 MiB (31.6%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 
           label: system-boot uuid: 7297-5AF9 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: Logitech Keyboard K120 type: Keyboard,HID 
           driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 046d:c31c 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //ports.ubuntu.com/ubuntu-ports bionic main restricted
           2: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates main restricted
           3: deb http: //ports.ubuntu.com/ubuntu-ports bionic universe
           4: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates universe
           5: deb http: //ports.ubuntu.com/ubuntu-ports bionic multiverse
           6: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates multiverse
           7: deb http: //ports.ubuntu.com/ubuntu-ports bionic-backports main restricted universe multiverse
           8: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security main restricted
           9: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security universe
           10: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security multiverse
           Active apt repos in: /etc/apt/sources.list.d/ubuntu-pi-flavour-makers-ubuntu-ppa-bionic.list 
           1: deb http: //ppa.launchpad.net/ubuntu-pi-flavour-makers/ppa/ubuntu bionic main
           Active apt repos in: /etc/apt/sources.list.d/ubuntu-raspi2-ubuntu-ppa-bionic.list 
           1: deb http: //ppa.launchpad.net/ubuntu-raspi2/ppa/ubuntu bionic main
Processes: CPU top: 5 
           1: cpu: 28.3% command: systemd-journald pid: 753 mem: 24.2 MiB (0.6%) 
           2: cpu: 20.8% command: rsyslogd pid: 1307 mem: 2.69 MiB (0.0%) 
           3: cpu: 13.4% command: wpa_supplicant pid: 1319 mem: 1.63 MiB (0.0%) 
           4: cpu: 2.2% command: init pid: 1 mem: 6.39 MiB (0.1%) 
           5: cpu: 0.2% command: [kworker/0:1h-mm] pid: 365 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 24.2 MiB (0.6%) command: systemd-journald pid: 753 cpu: 28.3% 
           2: mem: 13.7 MiB (0.3%) command: unattended-upgrade-shutdown started by: python3 
           pid: 1340 cpu: 0.0% 
           3: mem: 11.4 MiB (0.2%) command: networkd-dispatcher started by: python3 pid: 1309 
           cpu: 0.0% 
           4: mem: 6.39 MiB (0.1%) command: init pid: 1 cpu: 2.2% 
           5: mem: 5.07 MiB (0.1%) command: systemd pid: 1444 cpu: 0.0% 
Info:      Processes: 141 Uptime: 6m Init: systemd v: 237 runlevel: 5 Compilers: gcc: N/A 
           Client: shell wrapper v: 4.4.20-release inxi: 3.0.38

Benchmark #19538 - Brand: SanDisk SD Extreme Pro A2 (SR64G)