Benchmark #19557 - pibenchmarks.com

Brand: Undentified JMicron USB to SATA Adapter
SSD (2.5" SATA)
#12 / 1,675
892
#436 / 1,675
#422 / 984
#49 / 370
7,433
	Amazon.com AliExpress

Overview
2020-04-20 15:31:17
#19,557
2,609
-4,824 (-184.90%)
tester
tester

Storage Details
Undentified JMicron USB to SATA Adapter
SSD (2.5" SATA)
238.2G
SSD
JMicron
JMicronTech
2.10
480
152d:0562
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x0562 (Netac Portable SSD Z6s)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
30.2 MB/s
23.54 MB/s
23.54 MB/s
3,810 IOPS
3,169 IOPS
15,240 KB/s
12,679 KB/s
11,149 KB/s
11,324 KB/s
9,560 KB/s
11,873 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 900.1 MiB (22.6%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 133x44 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: type: dynamic noprefixroute scope: global IP v6: type: noprefixroute scope: link IF-ID-3: hassio state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-4: veth0154e4e state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth12a9d19 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth1f686ad state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth29a57b3 state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: veth39eecc5 state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: veth65e3cda state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: veth782bd86 state: up speed: 10000 Mbps duplex: full mac: IF-ID-11: veth8cb7745 state: up speed: 10000 Mbps duplex: full mac: IF-ID-12: vetha50e938 state: up speed: 10000 Mbps duplex: full mac: IF-ID-13: vethb96525c state: up speed: 10000 Mbps duplex: full mac: IF-ID-14: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 268.32 GiB used: 22.71 GiB (8.5%) ID-1: /dev/mmcblk0 model: EB1QL size: 29.84 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: JMicron Tech model: N/A size: 238.47 GiB block size: physical: 4096 B logical: 512 B rev: 0204 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 238.22 GiB size: 234.45 GiB (98.42%) used: 11.33 GiB (4.8%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9969-E3D2 ID-3: /var/lib/docker/overlay2/0ffcdd5557ab1e48cc706b34251a3ed909394432219ce7756a5626332babcd76/merged raw size: N/A size: 234.45 GiB used: 11.33 GiB (4.8%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-4: /var/lib/docker/overlay2/1794d5388718ad687f0291d95d1248600b5bb0a6e8933ff8f3ece2b37b0551e8/merged raw size: N/A size: 234.45 GiB used: 11.33 GiB (4.8%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-5: /var/lib/docker/overlay2/2722e14a1806093c969779c02a586de3e9ce8467bb19a2b3240b86ddeb3b1942/merged raw size: N/A size: 234.45 GiB used: 11.33 GiB (4.8%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-6: /var/lib/docker/overlay2/28c7b5acdcb32fcbb3e03563049e08031d5982b9ef0d6f13a883fcbb46aff81c/merged raw size: N/A size: 234.45 GiB used: 11.33 GiB (4.8%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-7: /var/lib/docker/overlay2/2c13c97f5c903c9642c7f38ea3a664db58d85c3b80bdfd978fd542f0f2a216b7/merged raw size: N/A size: 234.45 GiB used: 11.33 GiB (4.8%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-8: /var/lib/docker/overlay2/44efb35e08bb4a5054f19706c4ff8b27dc8dceb2e38dc1cfbc91c576e0063635/merged raw size: N/A size: 234.45 GiB used: 11.33 GiB (4.8%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-9: /var/lib/docker/overlay2/4a08c9c1f76259ea8ec92756dd0f4e999e67955b6eb869a1041c97fc57c2f0da/merged raw size: N/A size: 234.45 GiB used: 11.33 GiB (4.8%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-10: /var/lib/docker/overlay2/59b6f12839e9d05ebbd77ec70d5d379e720a35b846a243b5a99114bcc668d27d/merged raw size: N/A size: 234.45 GiB used: 11.33 GiB (4.8%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-11: /var/lib/docker/overlay2/7d4d1c761e9af84e8fe275ae2029d061bba0105c9fef3cc6c9e716e49509be68/merged raw size: N/A size: 234.45 GiB used: 11.33 GiB (4.8%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-12: /var/lib/docker/overlay2/a4e10e423f50990077898f1d877a17d7d54ae0deed08dfe05c4d87e5bd3ed065/merged raw size: N/A size: 234.45 GiB used: 11.33 GiB (4.8%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-13: /var/lib/docker/overlay2/b8ecc3ba0543d3d6b6286db862afbf4461776894db6dd3c639289db579543703/merged raw size: N/A size: 234.45 GiB used: 11.33 GiB (4.8%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-14: /var/lib/docker/overlay2/cb2dbe56d5a1730d72524d3a5102e1b1b89964100e3ce016dab4c31749c7901d/merged raw size: N/A size: 234.45 GiB used: 11.33 GiB (4.8%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-15: /var/lib/docker/overlay2/e5ec842e65e8a6ee010e9a67e804b290e6f64717812f530890fc1908e20454a0/merged raw size: N/A size: 234.45 GiB used: 11.33 GiB (4.8%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-16: /var/lib/docker/overlay2/ff57e31511b6e182028ff1c5f274c12cff90cbd67fef45ad4f670425fa6762d5/merged raw size: N/A size: 234.45 GiB used: 11.33 GiB (4.8%) fs: overlay source: ERR-102 label: N/A uuid: N/A Unmounted: ID-1: /dev/mmcblk0p2 size: 29.59 GiB fs: ext4 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 9969-E3D2 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.1:3 info: JMicron / JMicron USA type: Mass Storage driver: uas interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 152d:0562 Hub: 1-1.2:4 info: Genesys Logic 4-port hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 05e3:0610 Device-2: 1-1.2.1:6 info: Sigma Designs Aeotec Z-Stick Gen5 (ZW090) - UZB type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 0658:0200 Device-3: 1-1.2.4:7 info: Cygnal Integrated Products type: driver: cp210x interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 10c4:8a2a Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Hub: 2-2:2 info: Genesys Logic hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 05e3:0616 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 12.5% command: python3 pid: 8938 mem: 180.4 MiB (4.6%) 2: cpu: 11.8% command: dockerd pid: 711 mem: 71.1 MiB (1.8%) 3: cpu: 9.9% command: containerd pid: 542 mem: 34.2 MiB (0.8%) 4: cpu: 8.2% command: node-red pid: 12827 mem: 77.5 MiB (1.9%) 5: cpu: 3.0% command: server.js started by: node pid: 9329 mem: 48.9 MiB (1.2%) Memory top: 5 1: mem: 180.4 MiB (4.6%) command: python3 pid: 8938 cpu: 12.5% 2: mem: 77.5 MiB (1.9%) command: node-red pid: 12827 cpu: 8.2% 3: mem: 71.1 MiB (1.8%) command: dockerd pid: 711 cpu: 11.8% 4: mem: 59.9 MiB (1.5%) command: mysqld pid: 4779 cpu: 1.0% 5: mem: 48.9 MiB (1.2%) command: server.js started by: node pid: 9329 cpu: 3.0% Info: Processes: 243 Uptime: 11m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 900.1 MiB (22.6%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 133x44 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  type: dynamic noprefixroute scope: global 
           IP v6:  type: noprefixroute scope: link 
           IF-ID-3: hassio state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-4: veth0154e4e state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: veth12a9d19 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: veth1f686ad state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: veth29a57b3 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-8: veth39eecc5 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-9: veth65e3cda state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-10: veth782bd86 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-11: veth8cb7745 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-12: vetha50e938 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-13: vethb96525c state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-14: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 268.32 GiB used: 22.71 GiB (8.5%) 
           ID-1: /dev/mmcblk0 model: EB1QL size: 29.84 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: JMicron Tech model: N/A size: 238.47 GiB block size: 
           physical: 4096 B logical: 512 B rev: 0204 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 238.22 GiB size: 234.45 GiB (98.42%) used: 11.33 GiB (4.8%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9969-E3D2 
           ID-3: /var/lib/docker/overlay2/0ffcdd5557ab1e48cc706b34251a3ed909394432219ce7756a5626332babcd76/merged raw size: N/A size: 234.45 GiB used: 11.33 GiB (4.8%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-4: /var/lib/docker/overlay2/1794d5388718ad687f0291d95d1248600b5bb0a6e8933ff8f3ece2b37b0551e8/merged raw size: N/A size: 234.45 GiB used: 11.33 GiB (4.8%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-5: /var/lib/docker/overlay2/2722e14a1806093c969779c02a586de3e9ce8467bb19a2b3240b86ddeb3b1942/merged raw size: N/A size: 234.45 GiB used: 11.33 GiB (4.8%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-6: /var/lib/docker/overlay2/28c7b5acdcb32fcbb3e03563049e08031d5982b9ef0d6f13a883fcbb46aff81c/merged raw size: N/A size: 234.45 GiB used: 11.33 GiB (4.8%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-7: /var/lib/docker/overlay2/2c13c97f5c903c9642c7f38ea3a664db58d85c3b80bdfd978fd542f0f2a216b7/merged raw size: N/A size: 234.45 GiB used: 11.33 GiB (4.8%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-8: /var/lib/docker/overlay2/44efb35e08bb4a5054f19706c4ff8b27dc8dceb2e38dc1cfbc91c576e0063635/merged raw size: N/A size: 234.45 GiB used: 11.33 GiB (4.8%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-9: /var/lib/docker/overlay2/4a08c9c1f76259ea8ec92756dd0f4e999e67955b6eb869a1041c97fc57c2f0da/merged raw size: N/A size: 234.45 GiB used: 11.33 GiB (4.8%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-10: /var/lib/docker/overlay2/59b6f12839e9d05ebbd77ec70d5d379e720a35b846a243b5a99114bcc668d27d/merged raw size: N/A size: 234.45 GiB used: 11.33 GiB (4.8%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-11: /var/lib/docker/overlay2/7d4d1c761e9af84e8fe275ae2029d061bba0105c9fef3cc6c9e716e49509be68/merged raw size: N/A size: 234.45 GiB used: 11.33 GiB (4.8%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-12: /var/lib/docker/overlay2/a4e10e423f50990077898f1d877a17d7d54ae0deed08dfe05c4d87e5bd3ed065/merged raw size: N/A size: 234.45 GiB used: 11.33 GiB (4.8%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-13: /var/lib/docker/overlay2/b8ecc3ba0543d3d6b6286db862afbf4461776894db6dd3c639289db579543703/merged raw size: N/A size: 234.45 GiB used: 11.33 GiB (4.8%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-14: /var/lib/docker/overlay2/cb2dbe56d5a1730d72524d3a5102e1b1b89964100e3ce016dab4c31749c7901d/merged raw size: N/A size: 234.45 GiB used: 11.33 GiB (4.8%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-15: /var/lib/docker/overlay2/e5ec842e65e8a6ee010e9a67e804b290e6f64717812f530890fc1908e20454a0/merged raw size: N/A size: 234.45 GiB used: 11.33 GiB (4.8%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-16: /var/lib/docker/overlay2/ff57e31511b6e182028ff1c5f274c12cff90cbd67fef45ad4f670425fa6762d5/merged raw size: N/A size: 234.45 GiB used: 11.33 GiB (4.8%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Unmounted: ID-1: /dev/mmcblk0p2 size: 29.59 GiB fs: ext4 label: rootfs 
           uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 9969-E3D2 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.1:3 info: JMicron / JMicron USA type: Mass Storage driver: uas 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 152d:0562 Hub: 1-1.2:4 info: Genesys Logic 4-port hub ports: 4 rev: 2.1 speed: 480 Mb/s 
           chip ID: 05e3:0610 
           Device-2: 1-1.2.1:6 info: Sigma Designs Aeotec Z-Stick Gen5 (ZW090) - UZB 
           type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s 
           chip ID: 0658:0200 
           Device-3: 1-1.2.4:7 info: Cygnal Integrated Products type:  
           driver: cp210x interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 10c4:8a2a 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Hub: 2-2:2 info: Genesys Logic hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 05e3:0616 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 12.5% command: python3 pid: 8938 mem: 180.4 MiB (4.6%) 
           2: cpu: 11.8% command: dockerd pid: 711 mem: 71.1 MiB (1.8%) 
           3: cpu: 9.9% command: containerd pid: 542 mem: 34.2 MiB (0.8%) 
           4: cpu: 8.2% command: node-red pid: 12827 mem: 77.5 MiB (1.9%) 
           5: cpu: 3.0% command: server.js started by: node pid: 9329 mem: 48.9 MiB (1.2%) 
           Memory top: 5 
           1: mem: 180.4 MiB (4.6%) command: python3 pid: 8938 cpu: 12.5% 
           2: mem: 77.5 MiB (1.9%) command: node-red pid: 12827 cpu: 8.2% 
           3: mem: 71.1 MiB (1.8%) command: dockerd pid: 711 cpu: 11.8% 
           4: mem: 59.9 MiB (1.5%) command: mysqld pid: 4779 cpu: 1.0% 
           5: mem: 48.9 MiB (1.2%) command: server.js started by: node pid: 9329 cpu: 3.0% 
Info:      Processes: 243 Uptime: 11m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #19557 - Brand: Undentified JMicron USB to SATA Adapter