Benchmark #19615 - pibenchmarks.com

Brand: Zalman N Series 2.5" SSD
SSD (2.5" SATA)
#933 / 1,679
4
#479 / 1,679
#463 / 984
#69 / 370
7,161
	Amazon.com Amazon.ca Amazon.co.jp

Overview
2020-04-20 22:47:17
#19,615
7,050
-111 (-1.57%)
Anonymous
Zalman 64GB SSD on Pi4 4GB using StarTech SATA to USB

Storage Details
Zalman N Series 2.5" SSD
SSD (2.5" SATA)
60G
SSD
Zalman
N64GB
Serial
3.00
5,000
174c:55aa
0x174c (ASMedia Technology Inc.)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
165 MB/s
201.14 MB/s
209.73 MB/s
11,028 IOPS
15,363 IOPS
44,114 KB/s
61,455 KB/s
24,438 KB/s
21,363 KB/s
20,003 KB/s
23,856 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=e094f3fb-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 370.1 MiB (9.3%) gpu: 128.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr tty: 132x50 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Use of uninitialized value in string ne at ./inxi line 8920. Drives: Local Storage: total: 85.71 GiB used: 5.85 GiB (6.8%) ID-1: /dev/mmcblk0 model: 00000 size: 29.81 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB model: Zalman N64GB size: 55.90 GiB block size: physical: 512 B logical: 512 B sata: 2.6 speed: 3.0 Gb/s rev: 3.1.0 temp: 29 C scheme: MBR SMART: yes state: enabled health: PASSED on: 1y 210d 13h cycles: 279 read: 1.8 MiB written: 480 KiB Pre-Fail: reallocated sector: 95 threshold: 3 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 55.65 GiB size: 54.73 GiB (98.36%) used: 2.94 GiB (5.4%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 6341-C9E5 ID-3: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 6341-C9E5 ID-4: /media/pi/rootfs raw size: 29.56 GiB size: 29.04 GiB (98.26%) used: 2.81 GiB (9.7%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.4:3 info: Maxxter type: Mouse,Keyboard driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s chip ID: 248a:8367 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 1.9% command: init pid: 1 mem: 8.08 MiB (0.2%) 2: cpu: 1.3% command: xorg pid: 519 mem: 46.0 MiB (1.1%) 3: cpu: 0.6% command: lxpanel pid: 772 mem: 28.2 MiB (0.7%) 4: cpu: 0.6% command: smartd pid: 1744 mem: 3.17 MiB (0.0%) 5: cpu: 0.3% command: pcmanfm pid: 773 mem: 21.5 MiB (0.5%) Memory top: 5 1: mem: 47.9 MiB (1.2%) command: lxterminal pid: 1204 cpu: 0.3% 2: mem: 46.0 MiB (1.1%) command: xorg pid: 519 cpu: 1.3% 3: mem: 28.2 MiB (0.7%) command: lxpanel pid: 772 cpu: 0.6% 4: mem: 21.5 MiB (0.5%) command: pcmanfm pid: 773 cpu: 0.3% 5: mem: 18.0 MiB (0.4%) command: vncserver-x11-core pid: 475 cpu: 0.1% Info: Processes: 172 Uptime: 4m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=e094f3fb-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Console: tty 1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 370.1 MiB (9.3%) gpu: 128.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr 
           tty: 132x50 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac:  
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Use of uninitialized value in string ne at ./inxi line 8920.
Drives:    Local Storage: total: 85.71 GiB used: 5.85 GiB (6.8%) 
           ID-1: /dev/mmcblk0 model: 00000 size: 29.81 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB model: Zalman N64GB size: 55.90 GiB block size: 
           physical: 512 B logical: 512 B sata: 2.6 speed: 3.0 Gb/s rev: 3.1.0 
           temp: 29 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 1y 210d 13h cycles: 279 read: 1.8 MiB 
           written: 480 KiB Pre-Fail: reallocated sector: 95 threshold: 3 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 55.65 GiB size: 54.73 GiB (98.36%) used: 2.94 GiB (5.4%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 6341-C9E5 
           ID-3: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
           used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot 
           uuid: 6341-C9E5 
           ID-4: /media/pi/rootfs raw size: 29.56 GiB size: 29.04 GiB (98.26%) 
           used: 2.81 GiB (9.7%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.4:3 info: Maxxter type: Mouse,Keyboard driver: hid-generic,usbhid 
           interfaces: 2 rev: 1.1 speed: 12 Mb/s chip ID: 248a:8367 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-2: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 1.9% command: init pid: 1 mem: 8.08 MiB (0.2%) 
           2: cpu: 1.3% command: xorg pid: 519 mem: 46.0 MiB (1.1%) 
           3: cpu: 0.6% command: lxpanel pid: 772 mem: 28.2 MiB (0.7%) 
           4: cpu: 0.6% command: smartd pid: 1744 mem: 3.17 MiB (0.0%) 
           5: cpu: 0.3% command: pcmanfm pid: 773 mem: 21.5 MiB (0.5%) 
           Memory top: 5 
           1: mem: 47.9 MiB (1.2%) command: lxterminal pid: 1204 cpu: 0.3% 
           2: mem: 46.0 MiB (1.1%) command: xorg pid: 519 cpu: 1.3% 
           3: mem: 28.2 MiB (0.7%) command: lxpanel pid: 772 cpu: 0.6% 
           4: mem: 21.5 MiB (0.5%) command: pcmanfm pid: 773 cpu: 0.3% 
           5: mem: 18.0 MiB (0.4%) command: vncserver-x11-core pid: 475 cpu: 0.1% 
Info:      Processes: 172 Uptime: 4m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #19615 - Brand: Zalman N Series 2.5" SSD