Benchmark #19641 - pibenchmarks.com

Brand: Transcend JetFlash
USB Flash
#266 / 1,665
50
#994 / 1,665
#8 / 93
#11 / 89
3,118
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-21 02:21:37
#19,641
519
-2,599 (-500.77%)
Anonymous
transend 16gb usb3 key on Pi 2

Storage Details
Transcend JetFlash
USB Flash
14.5G
USB Flash
Transcend
JetFlashTranscend16GB
2.10
480
8564:1000
0x8564 (Transcend Information, Inc.)
0x1000 (Mustek BearPaw 1200 Scanner)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 2B 1.1
Raspberry Pi 2 Model B Rev 1.1
Raspberry Pi Foundation
900
250
450 (+50)

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
6.7 MB/s
26.64 MB/s
23.55 MB/s
35 IOPS
1,429 IOPS
143 KB/s
5,716 KB/s
9,568 KB/s
4,348 KB/s
6,067 KB/s
155 KB/s

inxi Results
System: Kernel: 4.19.115-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=tty1 root=PARTUUID=b7b55c47-02 rootfstype=ext4 elevator=deadline rootwait systemd.unit=multi-user.target quiet splash plymouth.ignore-serial-consoles Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 2 Model B Rev 1.1 details: BCM2835 rev: a01041 Memory: RAM: total: 991.6 MiB used: 178.9 MiB (18.0%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a7 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 5 microcode: N/A bogomips: 230 Speed: 900 MHz min/max: 600/900 MHz Core speeds (MHz): 1: 900 2: 900 3: 900 4: 900 Features: edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbturbo tty: 180x44 Message: Advanced graphics data unavailable in console for root. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: type: dynamic mngtmpaddr scope: global IP v6: scope: link WAN IP: No WAN IP data found. Connected to the web? SSL issues? Drives: Local Storage: total: 29.18 GiB used: 11.24 GiB (38.5%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL16G size: 14.46 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Transcend model: JetFlash Transcend 16GB size: 14.72 GiB block size: physical: 512 B logical: 512 B rev: 1.00 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 14.46 GiB size: 14.17 GiB (98.00%) used: 11.22 GiB (79.2%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: N/A uuid: ea32309a-83b9-4b85-b5ab-db4a695b6403 ID-2: /boot raw size: 56.0 MiB size: 55.9 MiB (99.90%) used: 24.7 MiB (44.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 993B-8922 Unmounted: ID-1: /dev/mmcblk0p2 size: 14.40 GiB fs: ext4 label: N/A uuid: fc254b57-8fff-4f96-9609-ea202d871acf ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: N/A uuid: D51B-65E6 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 Hub: 1-1.2:4 info: Transcend Information ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 8564:4100 Device-2: 1-1.2.2:5 info: Transcend Information JetFlash type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 8564:1000 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //mirrors.ircam.fr/pub/raspbian/raspbian buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/azlux.list 1: deb http: //packages.azlux.fr/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/collabora.list No active apt repos in: /etc/apt/sources.list.d/gateweb.list Active apt repos in: /etc/apt/sources.list.d/influxdb.list 1: deb https: //repos.influxdata.com/debian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main ui Active apt repos in: /etc/apt/sources.list.d/teamviewer.list 1: deb http: //linux.teamviewer.com/deb stable tv12 2: deb http: //linux.teamviewer.com/deb preview tv12 Processes: CPU top: 5 1: cpu: 1.6% command: telegraf pid: 435 mem: 41.1 MiB (4.2%) 2: cpu: 1.3% command: init pid: 1 mem: 8.37 MiB (0.8%) 3: cpu: 1.1% command: dnsmasq pid: 465 mem: 26.2 MiB (2.6%) 4: cpu: 1.0% command: sed pid: 3289 mem: 0.67 MiB (0.0%) 5: cpu: 0.6% command: systemd-journald pid: 322 mem: 8.26 MiB (0.8%) Memory top: 5 1: mem: 41.1 MiB (4.2%) command: telegraf pid: 435 cpu: 1.6% 2: mem: 26.2 MiB (2.6%) command: dnsmasq pid: 465 cpu: 1.1% 3: mem: 14.9 MiB (1.5%) command: networkmanager pid: 349 cpu: 0.0% 4: mem: 10.0 MiB (1.0%) command: lcd.py started by: python pid: 514 cpu: 0.5% 5: mem: 9.00 MiB (0.9%) command: snmpd pid: 440 cpu: 0.2% Info: Processes: 125 Uptime: 16m Init: systemd v: 241 runlevel: 3 default: 2 Compilers: gcc: 8.3.0 alt: 4.6/4.9/6/8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.115-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 
           bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=tty1 root=PARTUUID=b7b55c47-02 
           rootfstype=ext4 elevator=deadline rootwait systemd.unit=multi-user.target quiet splash 
           plymouth.ignore-serial-consoles 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 2 Model B Rev 1.1 details: BCM2835 rev: a01041 
           Memory:    RAM: total: 991.6 MiB used: 178.9 MiB (18.0%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a7 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 5 microcode: N/A bogomips: 230 
           Speed: 900 MHz min/max: 600/900 MHz Core speeds (MHz): 1: 900 2: 900 3: 900 4: 900 
           Features: edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 
           vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbturbo tty: 180x44 
           Message: Advanced graphics data unavailable in console for root. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB 
           driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr scope: global 
           IP v6:  scope: link 
           WAN IP: No WAN IP data found. Connected to the web? SSL issues? 
Drives:    Local Storage: total: 29.18 GiB used: 11.24 GiB (38.5%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL16G size: 14.46 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Transcend model: JetFlash Transcend 16GB 
           size: 14.72 GiB block size: physical: 512 B logical: 512 B rev: 1.00 
           scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 14.46 GiB size: 14.17 GiB (98.00%) used: 11.22 GiB (79.2%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: N/A uuid: ea32309a-83b9-4b85-b5ab-db4a695b6403 
           ID-2: /boot raw size: 56.0 MiB size: 55.9 MiB (99.90%) used: 24.7 MiB (44.2%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 993B-8922 
Unmounted: ID-1: /dev/mmcblk0p2 size: 14.40 GiB fs: ext4 label: N/A 
           uuid: fc254b57-8fff-4f96-9609-ea202d871acf 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: N/A uuid: D51B-65E6 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:9514 
           Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter 
           type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:ec00 
           Hub: 1-1.2:4 info: Transcend Information ports: 4 rev: 2.1 speed: 480 Mb/s 
           chip ID: 8564:4100 
           Device-2: 1-1.2.2:5 info: Transcend Information JetFlash type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 8564:1000 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //mirrors.ircam.fr/pub/raspbian/raspbian buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/azlux.list 
           1: deb http: //packages.azlux.fr/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/collabora.list 
           No active apt repos in: /etc/apt/sources.list.d/gateweb.list 
           Active apt repos in: /etc/apt/sources.list.d/influxdb.list 
           1: deb https: //repos.influxdata.com/debian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main ui
           Active apt repos in: /etc/apt/sources.list.d/teamviewer.list 
           1: deb http: //linux.teamviewer.com/deb stable tv12
           2: deb http: //linux.teamviewer.com/deb preview tv12
Processes: CPU top: 5 
           1: cpu: 1.6% command: telegraf pid: 435 mem: 41.1 MiB (4.2%) 
           2: cpu: 1.3% command: init pid: 1 mem: 8.37 MiB (0.8%) 
           3: cpu: 1.1% command: dnsmasq pid: 465 mem: 26.2 MiB (2.6%) 
           4: cpu: 1.0% command: sed pid: 3289 mem: 0.67 MiB (0.0%) 
           5: cpu: 0.6% command: systemd-journald pid: 322 mem: 8.26 MiB (0.8%) 
           Memory top: 5 
           1: mem: 41.1 MiB (4.2%) command: telegraf pid: 435 cpu: 1.6% 
           2: mem: 26.2 MiB (2.6%) command: dnsmasq pid: 465 cpu: 1.1% 
           3: mem: 14.9 MiB (1.5%) command: networkmanager pid: 349 cpu: 0.0% 
           4: mem: 10.0 MiB (1.0%) command: lcd.py started by: python pid: 514 cpu: 0.5% 
           5: mem: 9.00 MiB (0.9%) command: snmpd pid: 440 cpu: 0.2% 
Info:      Processes: 125 Uptime: 16m Init: systemd v: 241 runlevel: 3 default: 2 Compilers: 
           gcc: 8.3.0 alt: 4.6/4.9/6/8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #19641 - Brand: Transcend JetFlash