Benchmark #19699 - pibenchmarks.com

Brand: SanDisk X400
SSD (2.5" SATA)
#497 / 1,672
17
#777 / 1,672
#750 / 983
#236 / 370
5,535
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-21 08:28:03
#19,699
8,975
+3,440 (+38.33%)
Anonymous
SSD Sandisk X400 128GB am USB3.0 ASM1051

Storage Details
SanDisk X400
SSD (2.5" SATA)
128G
SSD
SanDisk
SD8SB8U128G1122
2.5 inch
SATA
174c:55aa
0x174c (ASMedia Technology Inc.)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
192 MB/s
337.1 MB/s
260.87 MB/s
11,240 IOPS
21,400 IOPS
44,961 KB/s
85,600 KB/s
33,990 KB/s
31,510 KB/s
23,610 KB/s
34,297 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 515.2 MiB (12.9%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 207x61 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-3: veth1425132 state: up speed: 10000 Mbps duplex: full mac: IF-ID-4: veth14c9b6f state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth950f565 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth9a7d790 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 148.97 GiB used: 19.06 GiB (12.8%) ID-1: /dev/mmcblk0 vendor: Samsung model: SP32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: SanDisk model: SD8SB8U128G1122 family: Marvell based SSDs size: 119.24 GiB block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: X4162000 temp: 34 C scheme: MBR SMART: yes state: enabled health: PASSED on: 1y 14d 8h cycles: 115 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 118.99 GiB size: 117.09 GiB (98.41%) used: 9.50 GiB (8.1%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 24eaa08b-10f2-49e0-8283-359f7eb1a0b6 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 69D5-9B27 ID-3: /var/lib/docker/overlay2/400125a11fef3f723ca4a3592c920d2ee20a96f08be1a914ad3bfa78c65f1357/merged raw size: N/A size: 117.09 GiB used: 9.50 GiB (8.1%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-4: /var/lib/docker/overlay2/95daa763cfe75f22600aaf2d5e8b80fd43ed5039a740f59bbda4173ec58baa74/merged raw size: N/A size: 117.09 GiB used: 9.50 GiB (8.1%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-5: /var/lib/docker/overlay2/cc0c1349a48d53c45407204469aa1e7384f320f2924d1dfeedd9bb29997142f8/merged raw size: N/A size: 117.09 GiB used: 9.50 GiB (8.1%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-6: /var/lib/docker/overlay2/f99243786a40d6a42eb2809f61214a335b19dad2be452dd7da43bc925f687286/merged raw size: N/A size: 117.09 GiB used: 9.50 GiB (8.1%) fs: overlay source: ERR-102 label: N/A uuid: N/A Unmounted: ID-1: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs uuid: 24eaa08b-10f2-49e0-8283-359f7eb1a0b6 ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 69D5-9B27 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.7% command: init pid: 1 mem: 7.96 MiB (0.2%) 2: cpu: 0.7% command: bash pid: 5139 mem: 2.65 MiB (0.0%) 3: cpu: 0.6% command: dockerd pid: 585 mem: 68.0 MiB (1.7%) 4: cpu: 0.4% command: pihole-ftl pid: 2815 mem: 17.5 MiB (0.4%) 5: cpu: 0.3% command: mysqld pid: 2005 mem: 113.2 MiB (2.8%) Memory top: 5 1: mem: 113.2 MiB (2.8%) command: mysqld pid: 2005 cpu: 0.3% 2: mem: 68.0 MiB (1.7%) command: dockerd pid: 585 cpu: 0.6% 3: mem: 47.2 MiB (1.2%) command: php-fpm: pid: 1962 cpu: 0.1% 4: mem: 34.8 MiB (0.8%) command: php-fpm: pid: 1957 cpu: 0.1% 5: mem: 32.6 MiB (0.8%) command: containerd pid: 583 cpu: 0.2% Info: Processes: 192 Uptime: 9m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 515.2 MiB (12.9%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 207x61 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-3: veth1425132 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-4: veth14c9b6f state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: veth950f565 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: veth9a7d790 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 148.97 GiB used: 19.06 GiB (12.8%) 
           ID-1: /dev/mmcblk0 vendor: Samsung model: SP32G size: 29.72 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: SanDisk model: SD8SB8U128G1122 
           family: Marvell based SSDs size: 119.24 GiB block size: physical: 512 B logical: 512 B 
           sata: 3.2 speed: 6.0 Gb/s rev: X4162000 temp: 34 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 1y 14d 8h cycles: 115 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 118.99 GiB size: 117.09 GiB (98.41%) used: 9.50 GiB (8.1%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 24eaa08b-10f2-49e0-8283-359f7eb1a0b6 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 69D5-9B27 
           ID-3: /var/lib/docker/overlay2/400125a11fef3f723ca4a3592c920d2ee20a96f08be1a914ad3bfa78c65f1357/merged raw size: N/A size: 117.09 GiB used: 9.50 GiB (8.1%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-4: /var/lib/docker/overlay2/95daa763cfe75f22600aaf2d5e8b80fd43ed5039a740f59bbda4173ec58baa74/merged raw size: N/A size: 117.09 GiB used: 9.50 GiB (8.1%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-5: /var/lib/docker/overlay2/cc0c1349a48d53c45407204469aa1e7384f320f2924d1dfeedd9bb29997142f8/merged raw size: N/A size: 117.09 GiB used: 9.50 GiB (8.1%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-6: /var/lib/docker/overlay2/f99243786a40d6a42eb2809f61214a335b19dad2be452dd7da43bc925f687286/merged raw size: N/A size: 117.09 GiB used: 9.50 GiB (8.1%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Unmounted: ID-1: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs 
           uuid: 24eaa08b-10f2-49e0-8283-359f7eb1a0b6 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 69D5-9B27 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.7% command: init pid: 1 mem: 7.96 MiB (0.2%) 
           2: cpu: 0.7% command: bash pid: 5139 mem: 2.65 MiB (0.0%) 
           3: cpu: 0.6% command: dockerd pid: 585 mem: 68.0 MiB (1.7%) 
           4: cpu: 0.4% command: pihole-ftl pid: 2815 mem: 17.5 MiB (0.4%) 
           5: cpu: 0.3% command: mysqld pid: 2005 mem: 113.2 MiB (2.8%) 
           Memory top: 5 
           1: mem: 113.2 MiB (2.8%) command: mysqld pid: 2005 cpu: 0.3% 
           2: mem: 68.0 MiB (1.7%) command: dockerd pid: 585 cpu: 0.6% 
           3: mem: 47.2 MiB (1.2%) command: php-fpm: pid: 1962 cpu: 0.1% 
           4: mem: 34.8 MiB (0.8%) command: php-fpm: pid: 1957 cpu: 0.1% 
           5: mem: 32.6 MiB (0.8%) command: containerd pid: 583 cpu: 0.2% 
Info:      Processes: 192 Uptime: 9m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #19699 - Brand: SanDisk X400