Benchmark #19752 - pibenchmarks.com

Brand: SanDisk SSD Plus
SSD (2.5" SATA)
#3 / 1,700
1,827
#369 / 1,700
#356 / 989
#35 / 370
8,235
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-22 02:45:57
#19,752
1,961
-6,274 (-319.94%)
Anonymous
Sandisk SSD plus on Pi3+ USB2

Storage Details
SanDisk SSD Plus
SSD (2.5" SATA)
120G
SSD
SanDisk
SSDPLUS120GB
2.5 inch
SATA
2.00
480
0424:5136
0x0424 (Microchip Technology, Inc. (formerly SMSC))
0x5136 (ASM1053 SATA 3Gb/s bridge)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B 1.2
Raspberry Pi 3 Model B Rev 1.2
Raspberry Pi Foundation
1,200
400
450

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
32.5 MB/s
28.06 MB/s
27.84 MB/s
2,237 IOPS
1,877 IOPS
8,949 KB/s
7,511 KB/s
9,371 KB/s
10,207 KB/s
7,179 KB/s
8,517 KB/s

inxi Results
System: Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=62576684-01 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 Memory: RAM: total: 1001.7 MiB used: 151.1 MiB (15.1%) gpu: 32.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 307 Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 4: 1200 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 164x44 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7+ Network: Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 IF: eth0 state: down mac: Device-2: Ralink RT5370 Wireless Adapter type: USB driver: rt2800usb bus ID: 1-1.5:4 chip ID: 148f:5370 IF: wlan1 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link IF-ID-1: wlan0 state: up mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 126.63 GiB used: 1.91 GiB (1.5%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL16G size: 14.84 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: SanDisk model: SSD PLUS 120GB size: 111.80 GiB block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: UE5100RL temp: 37 C scheme: MBR SMART: yes state: enabled health: PASSED cycles: 3 read: 0 KiB written: 0 KiB Old-Age: media wearout: 100 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 111.80 GiB size: 109.54 GiB (97.98%) used: 1.85 GiB (1.7%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: rootfs uuid: b8e9466b-95ea-40c3-99e5-641c28235c07 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 Unmounted: ID-1: /dev/mmcblk0p2 size: 14.58 GiB fs: ext4 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 Device-2: 1-1.3:5 info: ASMedia ASM1053 SATA 3Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 174c:5136 Device-3: 1-1.5:4 info: Ralink RT5370 Wireless Adapter type: Network driver: rt2800usb interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 148f:5370 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 1.0% command: init pid: 1 mem: 8.07 MiB (0.8%) 2: cpu: 0.9% command: smartd pid: 1347 mem: 3.18 MiB (0.3%) 3: cpu: 0.1% command: [kworker/u8:0-phy1] pid: 7 mem: 0.00 MiB (0.0%) 4: cpu: 0.1% command: [usb-storage] pid: 78 mem: 0.00 MiB (0.0%) 5: cpu: 0.1% command: systemd-journald pid: 98 mem: 6.41 MiB (0.6%) Memory top: 5 1: mem: 16.2 MiB (1.6%) command: smbd pid: 709 cpu: 0.0% 2: mem: 13.8 MiB (1.4%) command: php-cgi pid: 710 cpu: 0.0% 3: mem: 13.2 MiB (1.3%) command: pigeon_mon_app.py started by: python3.7 pid: 721 cpu: 0.1% 4: mem: 12.3 MiB (1.2%) command: winbindd pid: 700 cpu: 0.0% 5: mem: 11.6 MiB (1.1%) command: winbindd: pid: 707 cpu: 0.0% Info: Processes: 140 Uptime: 11m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 
           bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 
           root=PARTUUID=62576684-01 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 
           Memory:    RAM: total: 1001.7 MiB used: 151.1 MiB (15.1%) gpu: 32.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 307 
           Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 
           4: 1200 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 164x44 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7+ 
Network:   Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB 
           driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 
           IF: eth0 state: down mac:  
           Device-2: Ralink RT5370 Wireless Adapter type: USB driver: rt2800usb bus ID: 1-1.5:4 
           chip ID: 148f:5370 IF: wlan1 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-1: wlan0 state: up mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 126.63 GiB used: 1.91 GiB (1.5%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL16G size: 14.84 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: SanDisk model: SSD PLUS 120GB size: 111.80 GiB 
           block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: UE5100RL temp: 37 C scheme: MBR 
           SMART: yes state: enabled health: PASSED cycles: 3 read: 0 KiB written: 0 KiB Old-Age: 
           media wearout: 100 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 111.80 GiB size: 109.54 GiB (97.98%) used: 1.85 GiB (1.7%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: rootfs 
           uuid: b8e9466b-95ea-40c3-99e5-641c28235c07 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
Unmounted: ID-1: /dev/mmcblk0p2 size: 14.58 GiB fs: ext4 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:9514 
           Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter 
           type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:ec00 
           Device-2: 1-1.3:5 info: ASMedia ASM1053 SATA 3Gb/s bridge type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 174c:5136 
           Device-3: 1-1.5:4 info: Ralink RT5370 Wireless Adapter type: Network driver: rt2800usb 
           interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 148f:5370 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 1.0% command: init pid: 1 mem: 8.07 MiB (0.8%) 
           2: cpu: 0.9% command: smartd pid: 1347 mem: 3.18 MiB (0.3%) 
           3: cpu: 0.1% command: [kworker/u8:0-phy1] pid: 7 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.1% command: [usb-storage] pid: 78 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.1% command: systemd-journald pid: 98 mem: 6.41 MiB (0.6%) 
           Memory top: 5 
           1: mem: 16.2 MiB (1.6%) command: smbd pid: 709 cpu: 0.0% 
           2: mem: 13.8 MiB (1.4%) command: php-cgi pid: 710 cpu: 0.0% 
           3: mem: 13.2 MiB (1.3%) command: pigeon_mon_app.py started by: python3.7 pid: 721 
           cpu: 0.1% 
           4: mem: 12.3 MiB (1.2%) command: winbindd pid: 700 cpu: 0.0% 
           5: mem: 11.6 MiB (1.1%) command: winbindd: pid: 707 cpu: 0.0% 
Info:      Processes: 140 Uptime: 11m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #19752 - Brand: SanDisk SSD Plus