Benchmark #19884 - pibenchmarks.com

Brand: SanDisk SSD Plus
SSD (2.5" SATA)
#2 / 1,539
1,343
#571 / 1,539
#550 / 875
#172 / 363
5,919
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-22 17:49:05
#19,884
4,365
-1,554 (-35.60%)
Anonymous

Storage Details
SanDisk SSD Plus
SSD (2.5" SATA)
120G
SSD
SanDisk
SSDPLUS120GB
2.5 inch
SATA
3.00
5,000
174c:1153
0x174c (ASMedia Technology Inc.)
0x1153 (ASM1153 SATA 3Gb/s bridge)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
131 MB/s
180.18 MB/s
165.38 MB/s
4,241 IOPS
2,870 IOPS
16,967 KB/s
11,481 KB/s
20,431 KB/s
20,715 KB/s
11,698 KB/s
16,059 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.97 GiB used: 194.6 MiB (9.7%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 145x51 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 141.52 GiB used: 6.48 GiB (4.6%) ID-1: /dev/mmcblk0 model: SU32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: SanDisk model: SSD PLUS 120GB size: 111.80 GiB block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: UE5100RL temp: 45 C scheme: MBR SMART: yes state: enabled health: PASSED on: 2 hrs cycles: 22 read: 16 KiB written: 17 KiB Old-Age: media wearout: 100 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 111.54 GiB size: 109.83 GiB (98.47%) used: 6.43 GiB (5.9%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 638417fb-7220-47b1-883c-e6fee02f51ac ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: B6BB-0F0E ID-3: /mnt/nas raw size: N/A size: 1.70 TiB used: 1.40 TiB (82.1%) fs: cifs remote: //192.168.X.X/Fhem/FHEM_BACKUP label: N/A uuid: N/A Unmounted: ID-1: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs uuid: 638417fb-7220-47b1-883c-e6fee02f51ac ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: B6BB-0F0E USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.2:3 info: Future Devices Bridge(I2C/SPI/UART/FIFO) type: driver: ftdi_sio interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 0403:6015 Device-2: 1-1.3:4 info: Cygnal Integrated Products CP2102/CP2109 UART Bridge Controller [CP210x family] type: driver: cp210x interfaces: 1 rev: 1.1 speed: 12 Mb/s chip ID: 10c4:ea60 Device-3: 1-1.4:5 info: Atmel type: HID driver: N/A interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 03eb:2013 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-4: 2-1:2 info: ASMedia ASM1153 SATA 3Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:1153 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb https: //deb.nodesource.com/node_10.x buster main 2: deb-src https: //deb.nodesource.com/node_10.x buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.7% command: smartd pid: 1829 mem: 3.12 MiB (0.1%) 2: cpu: 0.5% command: init pid: 1 mem: 8.05 MiB (0.4%) 3: cpu: 0.2% command: [usb-storage] pid: 78 mem: 0.00 MiB (0.0%) 4: cpu: 0.2% command: bash pid: 1422 mem: 2.72 MiB (0.1%) 5: cpu: 0.1% command: snmpd pid: 540 mem: 10.9 MiB (0.5%) Memory top: 5 1: mem: 15.8 MiB (0.8%) command: smbd pid: 604 cpu: 0.0% 2: mem: 10.9 MiB (0.5%) command: snmpd pid: 540 cpu: 0.1% 3: mem: 8.83 MiB (0.4%) command: nmbd pid: 525 cpu: 0.0% 4: mem: 8.05 MiB (0.4%) command: init pid: 1 cpu: 0.5% 5: mem: 6.61 MiB (0.3%) command: systemd-journald pid: 114 cpu: 0.0% Info: Processes: 142 Uptime: 15m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
           Memory:    RAM: total: 1.97 GiB used: 194.6 MiB (9.7%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 145x51 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 141.52 GiB used: 6.48 GiB (4.6%) 
           ID-1: /dev/mmcblk0 model: SU32G size: 29.72 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: SanDisk model: SSD PLUS 120GB size: 111.80 GiB 
           block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: UE5100RL temp: 45 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 2 hrs cycles: 22 read: 16 KiB 
           written: 17 KiB Old-Age: media wearout: 100 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 111.54 GiB size: 109.83 GiB (98.47%) used: 6.43 GiB (5.9%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 638417fb-7220-47b1-883c-e6fee02f51ac 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: B6BB-0F0E 
           ID-3: /mnt/nas raw size: N/A size: 1.70 TiB used: 1.40 TiB (82.1%) fs: cifs 
           remote: //192.168.X.X/Fhem/FHEM_BACKUP label: N/A uuid: N/A 
Unmounted: ID-1: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs 
           uuid: 638417fb-7220-47b1-883c-e6fee02f51ac 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: B6BB-0F0E 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.2:3 info: Future Devices Bridge(I2C/SPI/UART/FIFO) 
           type:  driver: ftdi_sio interfaces: 1 rev: 2.0 speed: 12 Mb/s 
           chip ID: 0403:6015 Device-2: 1-1.3:4 
           info: Cygnal Integrated Products CP2102/CP2109 UART Bridge Controller [CP210x family] 
           type:  driver: cp210x interfaces: 1 rev: 1.1 speed: 12 Mb/s 
           chip ID: 10c4:ea60 Device-3: 1-1.4:5 info: Atmel type: HID driver: N/A interfaces: 1 rev: 2.0 
           speed: 12 Mb/s chip ID: 03eb:2013 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-4: 2-1:2 info: ASMedia ASM1153 SATA 3Gb/s bridge type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:1153 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb https: //deb.nodesource.com/node_10.x buster main
           2: deb-src https: //deb.nodesource.com/node_10.x buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.7% command: smartd pid: 1829 mem: 3.12 MiB (0.1%) 
           2: cpu: 0.5% command: init pid: 1 mem: 8.05 MiB (0.4%) 
           3: cpu: 0.2% command: [usb-storage] pid: 78 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.2% command: bash pid: 1422 mem: 2.72 MiB (0.1%) 
           5: cpu: 0.1% command: snmpd pid: 540 mem: 10.9 MiB (0.5%) 
           Memory top: 5 
           1: mem: 15.8 MiB (0.8%) command: smbd pid: 604 cpu: 0.0% 
           2: mem: 10.9 MiB (0.5%) command: snmpd pid: 540 cpu: 0.1% 
           3: mem: 8.83 MiB (0.4%) command: nmbd pid: 525 cpu: 0.0% 
           4: mem: 8.05 MiB (0.4%) command: init pid: 1 cpu: 0.5% 
           5: mem: 6.61 MiB (0.3%) command: systemd-journald pid: 114 cpu: 0.0% 
Info:      Processes: 142 Uptime: 15m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #19884 - Brand: SanDisk SSD Plus