Benchmark #20189 - pibenchmarks.com

Brand: Kingston SD Digital (SD64G)
C10 U1
#573 / 1,665
12
#1,450 / 1,665
#283 / 389
847
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-24 01:39:45
#20,189
551
-296 (-53.72%)
Anonymous
Kingston 120 GB SSD and WD external drive

Secure Digital (SD) Card Details
Kingston SD Digital (SD64G)
C10 U1
55.6G
SD
Kingston
SD64G
SDXC
3.00
0x41
42
3.0
05/2017
Class 10
None
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
10 MB/s
38.57 MB/s
38.5 MB/s
24 IOPS
2,270 IOPS
99 KB/s
9,082 KB/s
7,386 KB/s
210 KB/s
6,462 KB/s
214 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 295.6 MiB (7.4%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 120x30 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 635.79 GiB used: 74.69 GiB (11.7%) ID-1: /dev/mmcblk0 model: SD64G size: 58.24 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Kingston model: SV300S37A120G family: Driven SSDs size: 111.79 GiB block size: physical: 4096 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rev: 8101 drive rev: 505ABBF0 temp: 31 C scheme: MBR SMART: yes state: enabled health: PASSED on: 2y 264d 1h cycles: 3498 read: 19354 GiB written: 14642 GiB ID-3: /dev/sdb type: USB vendor: Western Digital model: WD5000AAKS-00YGA0 family: Caviar Blue (SATA) size: 465.76 GiB block size: physical: 512 B logical: 512 B sata: 2.6 speed: 3.0 Gb/s rev: 012 drive rev: 12.01C02 temp: 40 C scheme: MBR SMART: yes state: enabled health: PASSED on: 29d 7h cycles: 322 Old-Age: write error rate: 1 threshold: 1 Pre-Fail: reallocated sector: 191 threshold: 140 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 55.58 GiB size: 54.58 GiB (98.20%) used: 10.07 GiB (18.5%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p7 label: root uuid: 9f8c450d-d84f-4618-8e13-add2a02dabde ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 9E5D-8F5F ID-3: /mnt/usb1 raw size: 465.76 GiB size: 465.76 GiB (100.00%) used: 55.31 GiB (11.9%) fs: ntfs block size: 4096 B dev: /dev/sdb1 label: STORAGE uuid: 68BEB3F3BEB3B840 ID-4: /mnt/usb2 raw size: 111.79 GiB size: 109.53 GiB (97.98%) used: 9.25 GiB (8.4%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: 64516809-e67a-4f64-a71b-5742e382abde Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p1 size: 2.38 GiB fs: vfat label: RECOVERY uuid: 4ABD-3F85 ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS uuid: 0d9471b3-77ea-442b-9acf-18937a8cfeab USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.4:3 info: Western Digital type: Mass Storage,HID driver: hid-generic,usb-storage,usbhid interfaces: 2 rev: 2.0 speed: 480 Mb/s chip ID: 1058:0906 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-2:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi No active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.3% command: plex pid: 544 mem: 46.2 MiB (1.1%) 2: cpu: 0.3% command: plex pid: 679 mem: 31.3 MiB (0.8%) 3: cpu: 0.1% command: init pid: 1 mem: 8.11 MiB (0.2%) 4: cpu: 0.1% command: transmission-daemon pid: 533 mem: 4.88 MiB (0.1%) 5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 46.2 MiB (1.1%) command: plex pid: 544 cpu: 0.3% 2: mem: 31.3 MiB (0.8%) command: plex pid: 679 cpu: 0.3% 3: mem: 29.8 MiB (0.7%) command: deluge-web started by: python pid: 541 cpu: 0.0% 4: mem: 16.2 MiB (0.4%) command: smbd pid: 604 cpu: 0.0% 5: mem: 13.5 MiB (0.3%) command: smbd pid: 1085 cpu: 0.0% Info: Processes: 149 Uptime: 1h 02m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p7 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 295.6 MiB (7.4%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 120x30 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 635.79 GiB used: 74.69 GiB (11.7%) 
           ID-1: /dev/mmcblk0 model: SD64G size: 58.24 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Kingston model: SV300S37A120G family: Driven SSDs 
           size: 111.79 GiB block size: physical: 4096 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s 
           rev: 8101 drive rev: 505ABBF0 temp: 31 C 
           scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 2y 264d 1h cycles: 3498 read: 19354 GiB 
           written: 14642 GiB 
           ID-3: /dev/sdb type: USB vendor: Western Digital model: WD5000AAKS-00YGA0 
           family: Caviar Blue (SATA) size: 465.76 GiB block size: physical: 512 B logical: 512 B 
           sata: 2.6 speed: 3.0 Gb/s rev: 012 drive rev: 12.01C02 temp: 40 C 
           scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 29d 7h cycles: 322 Old-Age: 
           write error rate: 1 threshold: 1 Pre-Fail: reallocated sector: 191 threshold: 140 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 55.58 GiB size: 54.58 GiB (98.20%) used: 10.07 GiB (18.5%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p7 label: root 
           uuid: 9f8c450d-d84f-4618-8e13-add2a02dabde 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 9E5D-8F5F 
           ID-3: /mnt/usb1 raw size: 465.76 GiB size: 465.76 GiB (100.00%) used: 55.31 GiB (11.9%) 
           fs: ntfs block size: 4096 B dev: /dev/sdb1 label: STORAGE uuid: 68BEB3F3BEB3B840 
           ID-4: /mnt/usb2 raw size: 111.79 GiB size: 109.53 GiB (97.98%) used: 9.25 GiB (8.4%) 
           fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A 
           uuid: 64516809-e67a-4f64-a71b-5742e382abde 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p1 size: 2.38 GiB fs: vfat label: RECOVERY uuid: 4ABD-3F85 
           ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS 
           uuid: 0d9471b3-77ea-442b-9acf-18937a8cfeab 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.4:3 info: Western Digital type: Mass Storage,HID 
           driver: hid-generic,usb-storage,usbhid interfaces: 2 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1058:0906 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-2: 2-2:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage 
           driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           No active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list 
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.3% command: plex pid: 544 mem: 46.2 MiB (1.1%) 
           2: cpu: 0.3% command: plex pid: 679 mem: 31.3 MiB (0.8%) 
           3: cpu: 0.1% command: init pid: 1 mem: 8.11 MiB (0.2%) 
           4: cpu: 0.1% command: transmission-daemon pid: 533 mem: 4.88 MiB (0.1%) 
           5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 46.2 MiB (1.1%) command: plex pid: 544 cpu: 0.3% 
           2: mem: 31.3 MiB (0.8%) command: plex pid: 679 cpu: 0.3% 
           3: mem: 29.8 MiB (0.7%) command: deluge-web started by: python pid: 541 cpu: 0.0% 
           4: mem: 16.2 MiB (0.4%) command: smbd pid: 604 cpu: 0.0% 
           5: mem: 13.5 MiB (0.3%) command: smbd pid: 1085 cpu: 0.0% 
Info:      Processes: 149 Uptime: 1h 02m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #20189 - Brand: Kingston SD Digital (SD64G)