Benchmark #20219 - pibenchmarks.com

Brand: Kingston DataTraveler DTR30
USB Flash
#123 / 1,700
155
#1,446 / 1,700
#47 / 94
#45 / 89
976
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-24 05:15:50
#20,219
469
-507 (-108.10%)
Anonymous
Kingston USB stick 16gb on Pi 3b

Storage Details
Kingston DataTraveler DTR30
USB Flash
14.2G
USB Flash
Kingston
DataTraveler3.0
2.10
480
0951:1666
0x0951 (Kingston Technology)
0x1666 (DataTraveler 100 G3/G4/SE9 G2/50)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B 1.2
Raspberry Pi 3 Model B Rev 1.2
Raspberry Pi Foundation
1,200
250 (-150)
450

Operating System

Ubuntu 18.04.4 LTS
armv7l

Benchmark Results
6.4 MB/s
28.36 MB/s
27.94 MB/s
58 IOPS
1,313 IOPS
232 KB/s
5,255 KB/s
6,897 KB/s
3,302 KB/s
5,278 KB/s
362 KB/s

inxi Results
System: Kernel: 5.3.0-1017-raspi2 armv7l bits: 32 compiler: gcc v: 7.4.0 parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 net.ifnames=0 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=LABEL=writable rootfstype=ext4 elevator=deadline rootwait fixrtc Console: tty 0 dm: N/A Distro: Ubuntu 18.04.4 LTS (Bionic Beaver) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 Memory: RAM: total: 928.9 MiB used: 234.0 MiB (25.2%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 0 Speed: 600 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 271x78 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: IP v6: scope: link IF-ID-1: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 14.41 GiB used: 1.49 GiB (10.3%) ID-1: /dev/sda type: USB vendor: Kingston model: DataTraveler 3.0 size: 14.41 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 14.16 GiB size: 13.91 GiB (98.22%) used: 1.44 GiB (10.3%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: writable uuid: 6d33dc75-68ae-4697-b3c3-3dfa0473150a ID-2: /boot/firmware raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.8 MiB (20.6%) fs: vfat block size: 512 B dev: /dev/sda1 label: system-boot uuid: 7297-5AF9 Swap: Alert: No Swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 Device-2: 1-1.4:4 info: Kingston DataTraveler G4 type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0951:1666 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //ports.ubuntu.com/ubuntu-ports bionic main restricted 2: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates main restricted 3: deb http: //ports.ubuntu.com/ubuntu-ports bionic universe 4: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates universe 5: deb http: //ports.ubuntu.com/ubuntu-ports bionic multiverse 6: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates multiverse 7: deb http: //ports.ubuntu.com/ubuntu-ports bionic-backports main restricted universe multiverse 8: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security main restricted 9: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security universe 10: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security multiverse Active apt repos in: /etc/apt/sources.list.d/ubuntu-raspi2-ubuntu-ppa-bionic.list 1: deb http: //ppa.launchpad.net/ubuntu-raspi2/ppa/ubuntu bionic main Processes: CPU top: 5 1: cpu: 9.2% command: [kworker/2:5-mm_] pid: 3175 mem: 0.00 MiB (0.0%) 2: cpu: 8.7% command: [kworker/2:2-eve] pid: 182 mem: 0.00 MiB (0.0%) 3: cpu: 3.5% command: [kworker/0:1-eve] pid: 2992 mem: 0.00 MiB (0.0%) 4: cpu: 2.7% command: [kworker/1:4-eve] pid: 3143 mem: 0.00 MiB (0.0%) 5: cpu: 2.6% command: [kworker/2:4-eve] pid: 3174 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 13.8 MiB (1.6%) command: unattended-upgrade-shutdown started by: python3 pid: 1364 cpu: 0.0% 2: mem: 11.5 MiB (1.3%) command: networkd-dispatcher started by: python3 pid: 1339 cpu: 0.0% 3: mem: 6.61 MiB (0.7%) command: systemd-journald pid: 759 cpu: 0.0% 4: mem: 6.43 MiB (0.7%) command: init pid: 1 cpu: 0.4% 5: mem: 5.27 MiB (0.6%) command: systemd pid: 1667 cpu: 0.0% Info: Processes: 137 Uptime: 47m Init: systemd v: 237 runlevel: 5 Compilers: gcc: N/A Client: shell wrapper v: 4.4.20-release inxi: 3.1.00

inxi Results

System:    Kernel: 5.3.0-1017-raspi2 armv7l bits: 32 compiler: gcc v: 7.4.0 
           parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=656 
           bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 net.ifnames=0 dwc_otg.lpm_enable=0 console=ttyS0,115200 
           console=tty1 root=LABEL=writable rootfstype=ext4 elevator=deadline rootwait fixrtc 
           Console: tty 0 dm: N/A Distro: Ubuntu 18.04.4 LTS (Bionic Beaver) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 
           Memory:    RAM: total: 928.9 MiB used: 234.0 MiB (25.2%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 0 
           Speed: 600 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 271x78 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB 
           driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  type: dynamic scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-1: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 14.41 GiB used: 1.49 GiB (10.3%) 
           ID-1: /dev/sda type: USB vendor: Kingston model: DataTraveler 3.0 size: 14.41 GiB 
           block size: physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 14.16 GiB size: 13.91 GiB (98.22%) used: 1.44 GiB (10.3%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: writable 
           uuid: 6d33dc75-68ae-4697-b3c3-3dfa0473150a 
           ID-2: /boot/firmware raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
           used: 51.8 MiB (20.6%) fs: vfat block size: 512 B dev: /dev/sda1 label: system-boot 
           uuid: 7297-5AF9 
Swap:      Alert: No Swap data was found. 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:9514 
           Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter 
           type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:ec00 
           Device-2: 1-1.4:4 info: Kingston DataTraveler G4 type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0951:1666 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //ports.ubuntu.com/ubuntu-ports bionic main restricted
           2: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates main restricted
           3: deb http: //ports.ubuntu.com/ubuntu-ports bionic universe
           4: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates universe
           5: deb http: //ports.ubuntu.com/ubuntu-ports bionic multiverse
           6: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates multiverse
           7: deb http: //ports.ubuntu.com/ubuntu-ports bionic-backports main restricted universe multiverse
           8: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security main restricted
           9: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security universe
           10: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security multiverse
           Active apt repos in: /etc/apt/sources.list.d/ubuntu-raspi2-ubuntu-ppa-bionic.list 
           1: deb http: //ppa.launchpad.net/ubuntu-raspi2/ppa/ubuntu bionic main
Processes: CPU top: 5 
           1: cpu: 9.2% command: [kworker/2:5-mm_] pid: 3175 mem: 0.00 MiB (0.0%) 
           2: cpu: 8.7% command: [kworker/2:2-eve] pid: 182 mem: 0.00 MiB (0.0%) 
           3: cpu: 3.5% command: [kworker/0:1-eve] pid: 2992 mem: 0.00 MiB (0.0%) 
           4: cpu: 2.7% command: [kworker/1:4-eve] pid: 3143 mem: 0.00 MiB (0.0%) 
           5: cpu: 2.6% command: [kworker/2:4-eve] pid: 3174 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 13.8 MiB (1.6%) command: unattended-upgrade-shutdown started by: python3 
           pid: 1364 cpu: 0.0% 
           2: mem: 11.5 MiB (1.3%) command: networkd-dispatcher started by: python3 pid: 1339 
           cpu: 0.0% 
           3: mem: 6.61 MiB (0.7%) command: systemd-journald pid: 759 cpu: 0.0% 
           4: mem: 6.43 MiB (0.7%) command: init pid: 1 cpu: 0.4% 
           5: mem: 5.27 MiB (0.6%) command: systemd pid: 1667 cpu: 0.0% 
Info:      Processes: 137 Uptime: 47m Init: systemd v: 237 runlevel: 5 Compilers: gcc: N/A 
           Client: shell wrapper v: 4.4.20-release inxi: 3.1.00

Benchmark #20219 - Brand: Kingston DataTraveler DTR30