Benchmark #20236 - pibenchmarks.com

Brand: Western Digital Red SA500 Series
SSD (2.5" SATA)
#265 / 1,672
51
#656 / 1,672
#634 / 983
#168 / 370
6,134
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-24 06:43:29
#20,236
8,574
+2,440 (+28.46%)
andersmy
WD Red SA500 M.2 SSD in UGREEN M.2 SATA SSD Enclosure USB 3.0 to M2 NGFF Adapter

Storage Details
Western Digital Red SA500 Series
SSD (2.5" SATA)
500G
SSD
WDC
WDS500G1R0B-68A4Z0
M.2
SATA
3.00
5,000
174c:55aa
0x174c (ASMedia Technology Inc.)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
4 GB
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
198 MB/s
296.95 MB/s
245.89 MB/s
11,872 IOPS
15,025 IOPS
47,489 KB/s
60,102 KB/s
30,634 KB/s
26,983 KB/s
21,582 KB/s
33,196 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: N/A dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 222.6 MiB (5.6%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: 2a04:2746:1530:2100:f549:cf61:a414:31e7/64 type: dynamic mngtmpaddr noprefixroute scope: global IP v6: fe80::328f:d624:bee0:8609/64 scope: link IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: 45.134.X.X Drives: Local Storage: total: 495.48 GiB used: 3.01 GiB (0.6%) ID-1: /dev/mmcblk0 model: SC32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Western Digital model: WDS500G1R0B-68A4Z0 size: 465.76 GiB block size: physical: 512 B logical: 512 B sata: 3.3 speed: 6.0 Gb/s rev: 411000WR temp: 42 C scheme: MBR SMART: yes state: enabled health: PASSED on: 74 hrs cycles: 21 read: 65 KiB written: 73 KiB Old-Age: media wearout: 100 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 465.51 GiB size: 458.35 GiB (98.46%) used: 2.96 GiB (0.6%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 6341-C9E5 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 6341-C9E5 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.6% command: smartd pid: 1505 mem: 3.13 MiB (0.0%) 2: cpu: 0.3% command: packagekitd pid: 1158 mem: 12.7 MiB (0.3%) 3: cpu: 0.1% command: init pid: 1 mem: 7.97 MiB (0.2%) 4: cpu: 0.1% command: bash pid: 1017 mem: 2.77 MiB (0.0%) 5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 12.7 MiB (0.3%) command: packagekitd pid: 1158 cpu: 0.3% 2: mem: 10.6 MiB (0.2%) command: udisksd pid: 387 cpu: 0.0% 3: mem: 7.97 MiB (0.2%) command: init pid: 1 cpu: 0.1% 4: mem: 7.16 MiB (0.1%) command: polkitd pid: 443 cpu: 0.0% 5: mem: 7.04 MiB (0.1%) command: systemd pid: 532 cpu: 0.0% Info: Processes: 134 Uptime: 43m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) inxi: 3.1.00

inxi Results

System:
  Host: raspberrypi Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc 
  v: 4.9.3 
  parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
  smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
  vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 
  root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline 
  fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles 
  Console: N/A dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:
  Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 
  rev: c03112 
Memory:
  RAM: total: 3.89 GiB used: 222.6 MiB (5.6%) gpu: 76.0 MiB 
  RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots:
  ARM: No ARM data found for this feature. 
CPU:
  Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 
  type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A 
  bogomips: 1080 
  Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 
  3: 1500 4: 1500 
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls 
  vfp vfpd32 vfpv3 vfpv4 
  Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:
  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting 
  tty: 80x24 
  Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:
  Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A 
  chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Sound Server: ALSA v: k4.19.97-v7l+ 
Network:
  Message: No ARM data found for this feature. 
  IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full 
  mac: XX:XX:XX:XX:XX:XX 
  IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global 
  broadcast: 192.168.X.X 
  IP v6: 2a04:2746:1530:2100:f549:cf61:a414:31e7/64 
  type: dynamic mngtmpaddr noprefixroute scope: global 
  IP v6: fe80::328f:d624:bee0:8609/64 scope: link 
  IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX 
  WAN IP: 45.134.X.X 
Drives:
  Local Storage: total: 495.48 GiB used: 3.01 GiB (0.6%) 
  ID-1: /dev/mmcblk0 model: SC32G size: 29.72 GiB block size: 
  physical: 512 B logical: 512 B scheme: MBR 
  SMART Message: Unknown smartctl error. Unable to get data. 
  ID-2: /dev/sda type: USB vendor: Western Digital model: WDS500G1R0B-68A4Z0 
  size: 465.76 GiB block size: physical: 512 B logical: 512 B sata: 3.3 
  speed: 6.0 Gb/s rev: 411000WR temp: 42 C scheme: MBR 
  SMART: yes state: enabled health: PASSED on: 74 hrs cycles: 21 
  read: 65 KiB written: 73 KiB Old-Age: media wearout: 100 
  Message: No Optical or Floppy data was found. 
RAID:
  Message: No RAID data was found. 
Partition:
  ID-1: / raw size: 465.51 GiB size: 458.35 GiB (98.46%) 
  used: 2.96 GiB (0.6%) fs: ext4 block size: 4096 B dev: /dev/sda2 
  label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af 
  ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
  used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 
  label: boot uuid: 6341-C9E5 
Swap:
  Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
  ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 
  file: /var/swap 
Unmounted:
  ID-1: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs 
  uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af 
  ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 6341-C9E5 
USB:
  Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 
  speed: 480 Mb/s chip ID: 1d6b:0002 
  Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s 
  chip ID: 2109:3431 
  Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
  chip ID: 1d6b:0003 
  Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E 
  SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
  type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s 
  chip ID: 174c:55aa 
Sensors:
  Missing: Required tool sensors not installed. Check --recommends 
Repos:
  Active apt repos in: /etc/apt/sources.list 
  1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/raspi.list 
  1: deb http://archive.raspberrypi.org/debian/ buster main
Processes:
  CPU top: 5 
  1: cpu: 0.6% command: smartd pid: 1505 mem: 3.13 MiB (0.0%) 
  2: cpu: 0.3% command: packagekitd pid: 1158 mem: 12.7 MiB (0.3%) 
  3: cpu: 0.1% command: init pid: 1 mem: 7.97 MiB (0.2%) 
  4: cpu: 0.1% command: bash pid: 1017 mem: 2.77 MiB (0.0%) 
  5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 
  Memory top: 5 
  1: mem: 12.7 MiB (0.3%) command: packagekitd pid: 1158 cpu: 0.3% 
  2: mem: 10.6 MiB (0.2%) command: udisksd pid: 387 cpu: 0.0% 
  3: mem: 7.97 MiB (0.2%) command: init pid: 1 cpu: 0.1% 
  4: mem: 7.16 MiB (0.1%) command: polkitd pid: 443 cpu: 0.0% 
  5: mem: 7.04 MiB (0.1%) command: systemd pid: 532 cpu: 0.0% 
Info:
  Processes: 134 Uptime: 43m Init: systemd v: 241 runlevel: 5 
  target: graphical.target Compilers: gcc: 8.3.0 alt: 8 
  Shell: Storage.sh (sudo) inxi: 3.1.00

Benchmark #20236 - Brand: Western Digital Red SA500 Series