Benchmark #20301 - pibenchmarks.com

Brand: Kingston SSDNow V100
SSD (2.5" SATA)
#446 / 1,539
14
#876 / 1,539
#803 / 875
#319 / 363
3,204
	Amazon.com AliExpress Amazon.de Amazon.es Amazon.fr Amazon.it

Overview
2020-04-24 12:51:40
#20,301
3,242
+38 (+1.17%)
Anonymous
Kingston ASV100sv on RPI using ORICO USB adapter

Storage Details
Kingston SSDNow V100
SSD (2.5" SATA)
32G
SSD
Kingston
SV100S232G
2.5 inch
SATA
3.00
5,000
1d6b:0578
0x1d6b (Linux Foundation)
0x0578 (JMS578 SATA 6Gb/s)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
56.7 MB/s
143.94 MB/s
132.47 MB/s
3,924 IOPS
3,504 IOPS
15,696 KB/s
14,017 KB/s
27,715 KB/s
16,999 KB/s
9,527 KB/s
13,080 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait modules-load=dwc2,g_ether quiet splash plymouth.ignore-serial-consoles Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.97 GiB used: 215.5 MiB (10.7%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 237x71 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: IF-ID-2: usb0 state: down mac: IF-ID-3: wlan0 state: up mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 33.51 GiB used: 6.28 GiB (18.7%) ID-1: /dev/mmcblk0 model: SA04G size: 3.69 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB model: External USB3.0 drive model: SV100S232G size: 29.82 GiB block size: physical: 4096 B logical: 512 B sata: 2.6 speed: 3.0 Gb/s rev: 0204 drive rev: 111012 temp: 44 C scheme: MBR SMART: yes state: enabled health: PASSED on: 2y 291d 23h cycles: 88 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.56 GiB size: 29.05 GiB (98.26%) used: 3.37 GiB (11.6%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 6341-C9E5 ID-3: /media/root/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 6341-C9E5 ID-4: /media/root/rootfs raw size: 3.43 GiB size: 3.32 GiB (96.63%) used: 2.81 GiB (84.6%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.9% command: init pid: 1 mem: 8.06 MiB (0.4%) 2: cpu: 0.8% command: dhcpcd pid: 416 mem: 1.95 MiB (0.1%) 3: cpu: 0.6% command: systemd-journald pid: 113 mem: 9.20 MiB (0.4%) 4: cpu: 0.6% command: smartd pid: 11607 mem: 3.09 MiB (0.1%) 5: cpu: 0.3% command: vncserver-x11-core pid: 441 mem: 14.3 MiB (0.7%) Memory top: 5 1: mem: 14.3 MiB (0.7%) command: vncserver-x11-core pid: 441 cpu: 0.3% 2: mem: 12.7 MiB (0.6%) command: packagekitd pid: 9502 cpu: 0.2% 3: mem: 11.1 MiB (0.5%) command: udisksd pid: 362 cpu: 0.0% 4: mem: 9.20 MiB (0.4%) command: systemd-journald pid: 113 cpu: 0.6% 5: mem: 8.06 MiB (0.4%) command: init pid: 1 cpu: 0.9% Info: Processes: 146 Uptime: 10m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait modules-load=dwc2,g_ether quiet splash 
           plymouth.ignore-serial-consoles 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
           Memory:    RAM: total: 1.97 GiB used: 215.5 MiB (10.7%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 237x71 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac:  
           IF-ID-2: usb0 state: down mac:  
           IF-ID-3: wlan0 state: up mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 33.51 GiB used: 6.28 GiB (18.7%) 
           ID-1: /dev/mmcblk0 model: SA04G size: 3.69 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB model: External USB3.0 drive model: SV100S232G size: 29.82 GiB 
           block size: physical: 4096 B logical: 512 B sata: 2.6 speed: 3.0 Gb/s rev: 0204 drive rev: 111012 temp: 44 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 2y 291d 23h cycles: 88 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.56 GiB size: 29.05 GiB (98.26%) used: 3.37 GiB (11.6%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 6341-C9E5 
           ID-3: /media/root/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
           used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot 
           uuid: 6341-C9E5 
           ID-4: /media/root/rootfs raw size: 3.43 GiB size: 3.32 GiB (96.63%) 
           used: 2.81 GiB (84.6%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage 
           driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.9% command: init pid: 1 mem: 8.06 MiB (0.4%) 
           2: cpu: 0.8% command: dhcpcd pid: 416 mem: 1.95 MiB (0.1%) 
           3: cpu: 0.6% command: systemd-journald pid: 113 mem: 9.20 MiB (0.4%) 
           4: cpu: 0.6% command: smartd pid: 11607 mem: 3.09 MiB (0.1%) 
           5: cpu: 0.3% command: vncserver-x11-core pid: 441 mem: 14.3 MiB (0.7%) 
           Memory top: 5 
           1: mem: 14.3 MiB (0.7%) command: vncserver-x11-core pid: 441 cpu: 0.3% 
           2: mem: 12.7 MiB (0.6%) command: packagekitd pid: 9502 cpu: 0.2% 
           3: mem: 11.1 MiB (0.5%) command: udisksd pid: 362 cpu: 0.0% 
           4: mem: 9.20 MiB (0.4%) command: systemd-journald pid: 113 cpu: 0.6% 
           5: mem: 8.06 MiB (0.4%) command: init pid: 1 cpu: 0.9% 
Info:      Processes: 146 Uptime: 10m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #20301 - Brand: Kingston SSDNow V100