Benchmark #20460 - pibenchmarks.com

Brand: SanDisk SD Ultra (SL08G)
C10
#98 / 1,539
114
#1,374 / 1,539
#294 / 369
653
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-25 04:35:09
#20,460
652
-1 (-0.15%)
ChopperBp
Sandisk SL08G 8GBi SDCard on Pi 3 Model B Plus Rev 1.3

Secure Digital (SD) Card Details
SanDisk SD Ultra (SL08G)
C10
7.4G
SD
SanDisk
SL08G
SDHC
3.00
0x03
SD
8.0
03/2015
Class 10
None
None
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
1,400
400
450 (-50)
50

Operating System

Raspbian GNU/Linux 9 (stretch)
armv7l

Benchmark Results
9.3 MB/s
22.02 MB/s
21.99 MB/s
173 IOPS
2,010 IOPS
694 KB/s
8,043 KB/s
7,175 KB/s
2,449 KB/s
7,032 KB/s
847 KB/s

inxi Results
System: Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=c5012307-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Memory: RAM: total: 991.6 MiB used: 108.0 MiB (10.9%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 168x31 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.66-v7+ Network: Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:4 chip ID: 0424:7800 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-1: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 7.40 GiB used: 1.66 GiB (22.5%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL08G size: 7.40 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 7.36 GiB size: 7.21 GiB (98.05%) used: 1.64 GiB (22.7%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 29075e46-f0d4-44e2-a9e7-55ac02d6e6cc ID-2: /boot raw size: 43.9 MiB size: 43.2 MiB (98.43%) used: 22.3 MiB (51.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9304-D9FD Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Device-1: 1-1.1.1:4 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian stretch stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ stretch main ui Processes: CPU top: 5 1: cpu: 0.2% command: sudo pid: 7000 mem: 3.29 MiB (0.3%) 2: cpu: 0.1% command: bash pid: 7009 mem: 2.62 MiB (0.2%) 3: cpu: 0.0% command: init pid: 1 mem: 6.02 MiB (0.6%) 4: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 5: cpu: 0.0% command: [rcu_gp] pid: 3 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 12.9 MiB (1.3%) command: mailhog pid: 378 cpu: 0.0% 2: mem: 12.7 MiB (1.3%) command: fail2ban-server started by: python3 pid: 591 cpu: 0.0% 3: mem: 11.0 MiB (1.1%) command: packagekitd pid: 3246 cpu: 0.0% 4: mem: 6.32 MiB (0.6%) command: systemd-journald pid: 105 cpu: 0.0% 5: mem: 6.02 MiB (0.6%) command: init pid: 1 cpu: 0.0% Info: Processes: 111 Uptime: 27d 18h 53m Init: systemd v: 232 runlevel: 5 Compilers: gcc: 6.3.0 alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 
           bcm2708_fb.fbheight=416 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 
           vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 
           console=ttyS0,115200 console=tty1 root=PARTUUID=c5012307-02 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 
           rev: a020d3 Memory:    RAM: total: 991.6 MiB used: 108.0 MiB (10.9%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 
           Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 
           4: 1400 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 168x31 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.66-v7+ 
Network:   Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:4 
           chip ID: 0424:7800 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-1: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 7.40 GiB used: 1.66 GiB (22.5%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL08G size: 7.40 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 7.36 GiB size: 7.21 GiB (98.05%) used: 1.64 GiB (22.7%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 29075e46-f0d4-44e2-a9e7-55ac02d6e6cc 
           ID-2: /boot raw size: 43.9 MiB size: 43.2 MiB (98.43%) used: 22.3 MiB (51.7%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9304-D9FD 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Device-1: 1-1.1.1:4 info: Standard Microsystems type: Network driver: lan78xx 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian stretch stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ stretch main ui
Processes: CPU top: 5 
           1: cpu: 0.2% command: sudo pid: 7000 mem: 3.29 MiB (0.3%) 
           2: cpu: 0.1% command: bash pid: 7009 mem: 2.62 MiB (0.2%) 
           3: cpu: 0.0% command: init pid: 1 mem: 6.02 MiB (0.6%) 
           4: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.0% command: [rcu_gp] pid: 3 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 12.9 MiB (1.3%) command: mailhog pid: 378 cpu: 0.0% 
           2: mem: 12.7 MiB (1.3%) command: fail2ban-server started by: python3 pid: 591 cpu: 0.0% 
           3: mem: 11.0 MiB (1.1%) command: packagekitd pid: 3246 cpu: 0.0% 
           4: mem: 6.32 MiB (0.6%) command: systemd-journald pid: 105 cpu: 0.0% 
           5: mem: 6.02 MiB (0.6%) command: init pid: 1 cpu: 0.0% 
Info:      Processes: 111 Uptime: 27d 18h 53m Init: systemd v: 232 runlevel: 5 Compilers: 
           gcc: 6.3.0 alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.1.00

Benchmark #20460 - Brand: SanDisk SD Ultra (SL08G)