Benchmark #20704 - pibenchmarks.com

Brand: Linux Storage - FILEIO
Virtual
#1,327 / 1,675
1
#1,409 / 1,675
#41 / 93
#0 / 13
1,016

Overview
2020-04-26 02:37:17
#20,704
1,016
0 (0.00%)
Anonymous

Storage Details
Linux Storage - FILEIO
Virtual
100G
USB Flash
Linux
FILEIO
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 2B 1.1
Raspberry Pi 2 Model B Rev 1.1
Raspberry Pi Foundation
900
250
1 GB
450 (+50)

Operating System

Raspbian GNU/Linux 9 (stretch)
armv7l

Benchmark Results
11.3 MB/s
10.82 MB/s
10.97 MB/s
2,413 IOPS
2,716 IOPS
9,654 KB/s
10,867 KB/s
3,729 KB/s
3,143 KB/s
3,740 KB/s
3,352 KB/s

inxi Results
System: Host: pi Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=tty1 root=PARTUUID=5F4DDC4A-BBB3-4867-A42D-D462422CD4C5 rootdelay=5 rootfstype=ext4 elevator=deadline rootwait Console: N/A dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) Machine: Type: ARM Device System: Raspberry Pi 2 Model B Rev 1.1 details: BCM2835 rev: a01041 Memory: RAM: total: 991.6 MiB used: 346.8 MiB (35.0%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a7 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 5 microcode: N/A bogomips: 230 Speed: 900 MHz min/max: 600/900 MHz Core speeds (MHz): 1: 900 2: 900 3: 900 4: 900 Features: edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.19.2 driver: fbturbo tty: 80x24 Message: Advanced graphics data unavailable in console for root. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.66-v7+ Network: Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 scope: global broadcast: 192.168.X.X IP v6: fd34:3dfe:5017:1:ba27:ebff:fe50:ddda/64 type: mngtmpaddr dynamic scope: global IP v6: fe80::ba27:ebff:fe50:ddda/64 scope: link IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac: XX:XX:XX:XX:XX:XX IP v4: 172.17.X.X/16 scope: global broadcast: 172.17.X.X IP v6: fe80::42:66ff:fe30:7d06/64 scope: link IF-ID-2: veth1fe24e0 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-3: veth91d5fb7 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX WAN IP: 84.104.X.X Drives: Local Storage: total: 137.33 GiB used: 21.05 GiB (15.3%) ID-1: /dev/mmcblk0 model: USD size: 7.51 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Lexar model: USB Flash Drive size: 29.81 GiB block size: physical: 512 B logical: 512 B rev: 1100 scheme: GPT SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? ID-3: /dev/sdb model: FILEIO size: 100.00 GiB block size: physical: 512 B logical: 512 B N/A rev: 4.0 scheme: MBR SMART: no Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.81 GiB size: 29.22 GiB (98.01%) used: 7.28 GiB (24.9%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: rootfs uuid: 8980b032-f1c8-4b48-8cba-374d4f542686 ID-2: /boot raw size: 56.0 MiB size: 55.9 MiB (99.90%) used: 23.5 MiB (42.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 140A-14B7 ID-3: /mnt/iscsi raw size: 100.00 GiB size: 98.30 GiB (98.31%) used: 6.46 GiB (6.6%) fs: ext4 block size: 4096 B dev: /dev/sdb1 label: N/A uuid: 3686c4ad-2c42-4a47-8d91-86d472cb9df0 ID-4: /mnt/netgear raw size: N/A size: 5.42 TiB used: 2.28 TiB (42.2%) fs: nfs remote: 192.168.X.X:/media label: N/A uuid: N/A ID-5: /var/lib/docker/overlay2/4818a0e5d27caecba0b1e7440f301cf2d883432cd81004b4b3d6bbbee1699383/merged raw size: N/A size: 29.22 GiB used: 7.28 GiB (24.9%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-6: /var/lib/docker/overlay2/ef62a0f4217eaa119b169e3e9418ce2f2e6f9aa78d83c7635c8feed22f359e5a/merged raw size: N/A size: 29.22 GiB used: 7.28 GiB (24.9%) fs: overlay source: ERR-102 label: N/A uuid: N/A Swap: Kernel: swappiness: 10 (default 60) cache pressure: 100 (default) ID-1: swap-1 type: file size: 985.0 MiB used: 89.8 MiB (9.1%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p2 size: 7.46 GiB fs: ext4 label: N/A uuid: f24a4949-f4b2-4cad-a780-a138695079ec USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 Device-2: 1-1.2:4 info: Lexar Media type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 05dc:a83a Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/deconz.list 1: deb http://phoscon.de/apt/deconz stretch main Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https://download.docker.com/linux/raspbian stretch edge Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ stretch main ui Active apt repos in: /etc/apt/sources.list.d/unstable.list 1: deb http://deb.debian.org/debian/ unstable main Processes: CPU top: 5 1: cpu: 16.8% command: retrieve.php started by: php pid: 23061 mem: 32.0 MiB (3.2%) 2: cpu: 5.6% command: mysqld pid: 2185 mem: 116.4 MiB (11.9%) 3: cpu: 1.8% command: [kworker/u8:3-ev] pid: 22178 mem: 0.00 MiB (0.0%) 4: cpu: 0.6% command: [kworker/u8:2-is] pid: 23479 mem: 0.00 MiB (0.0%) 5: cpu: 0.3% command: python pid: 1175 mem: 5.28 MiB (0.5%) Memory top: 5 1: mem: 116.4 MiB (11.9%) command: mysqld pid: 2185 cpu: 5.6% 2: mem: 32.0 MiB (3.2%) command: retrieve.php started by: php pid: 23061 cpu: 16.8% 3: mem: 26.3 MiB (2.6%) command: apache2 pid: 1093 cpu: 0.0% 4: mem: 25.9 MiB (2.6%) command: dockerd pid: 3141 cpu: 0.2% 5: mem: 17.2 MiB (1.7%) command: pihole-ftl pid: 1137 cpu: 0.1% Info: Processes: 152 Uptime: 22h 47m Init: systemd v: 232 runlevel: 3 target: multi-user.target Compilers: gcc: 6.3.0 alt: 4.6/4.9/6 Shell: Storage.sh (sudo) inxi: 3.1.00

inxi Results

System:
  Host: pi Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
  parameters: coherent_pool=1M bcm2708_fb.fbwidth=656 
  bcm2708_fb.fbheight=416 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 
  vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 
  console=tty1 root=PARTUUID=5F4DDC4A-BBB3-4867-A42D-D462422CD4C5 
  rootdelay=5 rootfstype=ext4 elevator=deadline rootwait 
  Console: N/A dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) 
Machine:
  Type: ARM Device System: Raspberry Pi 2 Model B Rev 1.1 details: BCM2835 
  rev: a01041 
Memory:
  RAM: total: 991.6 MiB used: 346.8 MiB (35.0%) gpu: 16.0 MiB 
  RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots:
  ARM: No ARM data found for this feature. 
CPU:
  Topology: Quad Core model: ARMv7 v7l variant: cortex-a7 bits: 32 type: MCP 
  arch: v7l family: 7 model-id: N/A stepping: 5 microcode: N/A bogomips: 230 
  Speed: 900 MHz min/max: 600/900 MHz Core speeds (MHz): 1: 900 2: 900 
  3: 900 4: 900 
  Features: edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp 
  vfpd32 vfpv3 vfpv4 
  Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:
  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A 
  chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Display: server: X.org 1.19.2 driver: fbturbo tty: 80x24 
  Message: Advanced graphics data unavailable in console for root. 
Audio:
  Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A 
  chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Sound Server: ALSA v: k4.19.66-v7+ 
Network:
  Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter 
  type: USB driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 
  IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
  IP v4: 192.168.X.X/24 scope: global broadcast: 192.168.X.X 
  IP v6: fd34:3dfe:5017:1:ba27:ebff:fe50:ddda/64 type: mngtmpaddr dynamic 
  scope: global 
  IP v6: fe80::ba27:ebff:fe50:ddda/64 scope: link 
  IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac: XX:XX:XX:XX:XX:XX 
  IP v4: 172.17.X.X/16 scope: global broadcast: 172.17.X.X 
  IP v6: fe80::42:66ff:fe30:7d06/64 scope: link 
  IF-ID-2: veth1fe24e0 state: up speed: 10000 Mbps duplex: full 
  mac: XX:XX:XX:XX:XX:XX 
  IF-ID-3: veth91d5fb7 state: up speed: 10000 Mbps duplex: full 
  mac: XX:XX:XX:XX:XX:XX 
  WAN IP: 84.104.X.X 
Drives:
  Local Storage: total: 137.33 GiB used: 21.05 GiB (15.3%) 
  ID-1: /dev/mmcblk0 model: USD size: 7.51 GiB block size: physical: 512 B 
  logical: 512 B scheme: MBR 
  SMART Message: Unknown smartctl error. Unable to get data. 
  ID-2: /dev/sda type: USB vendor: Lexar model: USB Flash Drive 
  size: 29.81 GiB block size: physical: 512 B logical: 512 B 
  rev: 1100 scheme: GPT 
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
  ID-3: /dev/sdb model: FILEIO size: 100.00 GiB block size: physical: 512 B 
  logical: 512 B N/A rev: 4.0 scheme: MBR 
  SMART: no 
  Message: No Optical or Floppy data was found. 
RAID:
  Message: No RAID data was found. 
Partition:
  ID-1: / raw size: 29.81 GiB size: 29.22 GiB (98.01%) 
  used: 7.28 GiB (24.9%) fs: ext4 block size: 4096 B dev: /dev/sda1 
  label: rootfs uuid: 8980b032-f1c8-4b48-8cba-374d4f542686 
  ID-2: /boot raw size: 56.0 MiB size: 55.9 MiB (99.90%) 
  used: 23.5 MiB (42.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 
  label: boot uuid: 140A-14B7 
  ID-3: /mnt/iscsi raw size: 100.00 GiB size: 98.30 GiB (98.31%) 
  used: 6.46 GiB (6.6%) fs: ext4 block size: 4096 B dev: /dev/sdb1 
  label: N/A uuid: 3686c4ad-2c42-4a47-8d91-86d472cb9df0 
  ID-4: /mnt/netgear raw size: N/A size: 5.42 TiB used: 2.28 TiB (42.2%) 
  fs: nfs remote: 192.168.X.X:/media label: N/A uuid: N/A 
  ID-5: /var/lib/docker/overlay2/4818a0e5d27caecba0b1e7440f301cf2d883432cd81004b4b3d6bbbee1699383/merged raw size: N/A size: 29.22 GiB used: 7.28 GiB (24.9%) fs: overlay 
  source: ERR-102 label: N/A uuid: N/A 
  ID-6: /var/lib/docker/overlay2/ef62a0f4217eaa119b169e3e9418ce2f2e6f9aa78d83c7635c8feed22f359e5a/merged raw size: N/A size: 29.22 GiB used: 7.28 GiB (24.9%) fs: overlay 
  source: ERR-102 label: N/A uuid: N/A 
Swap:
  Kernel: swappiness: 10 (default 60) cache pressure: 100 (default) 
  ID-1: swap-1 type: file size: 985.0 MiB used: 89.8 MiB (9.1%) priority: -2 
  file: /var/swap 
Unmounted:
  ID-1: /dev/mmcblk0p2 size: 7.46 GiB fs: ext4 label: N/A 
  uuid: f24a4949-f4b2-4cad-a780-a138695079ec 
USB:
  Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 
  speed: 480 Mb/s chip ID: 1d6b:0002 
  Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 
  speed: 480 Mb/s chip ID: 0424:9514 
  Device-1: 1-1.1:3 
  info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter 
  type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s 
  chip ID: 0424:ec00 
  Device-2: 1-1.2:4 info: Lexar Media type: Mass Storage driver: usb-storage 
  interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 05dc:a83a Sensors:
  Missing: Required tool sensors not installed. Check --recommends 
Repos:
  Active apt repos in: /etc/apt/sources.list 
  1: deb http://raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/deconz.list 
  1: deb http://phoscon.de/apt/deconz stretch main
  Active apt repos in: /etc/apt/sources.list.d/docker.list 
  1: deb [arch=armhf] https://download.docker.com/linux/raspbian stretch edge
  Active apt repos in: /etc/apt/sources.list.d/raspi.list 
  1: deb http://archive.raspberrypi.org/debian/ stretch main ui
  Active apt repos in: /etc/apt/sources.list.d/unstable.list 
  1: deb http://deb.debian.org/debian/ unstable main
Processes:
  CPU top: 5 
  1: cpu: 16.8% command: retrieve.php started by: php pid: 23061 
  mem: 32.0 MiB (3.2%) 
  2: cpu: 5.6% command: mysqld pid: 2185 mem: 116.4 MiB (11.9%) 
  3: cpu: 1.8% command: [kworker/u8:3-ev] pid: 22178 mem: 0.00 MiB (0.0%) 
  4: cpu: 0.6% command: [kworker/u8:2-is] pid: 23479 mem: 0.00 MiB (0.0%) 
  5: cpu: 0.3% command: python pid: 1175 mem: 5.28 MiB (0.5%) 
  Memory top: 5 
  1: mem: 116.4 MiB (11.9%) command: mysqld pid: 2185 cpu: 5.6% 
  2: mem: 32.0 MiB (3.2%) command: retrieve.php started by: php pid: 23061 
  cpu: 16.8% 
  3: mem: 26.3 MiB (2.6%) command: apache2 pid: 1093 cpu: 0.0% 
  4: mem: 25.9 MiB (2.6%) command: dockerd pid: 3141 cpu: 0.2% 
  5: mem: 17.2 MiB (1.7%) command: pihole-ftl pid: 1137 cpu: 0.1% 
Info:
  Processes: 152 Uptime: 22h 47m Init: systemd v: 232 runlevel: 3 
  target: multi-user.target Compilers: gcc: 6.3.0 alt: 4.6/4.9/6 
  Shell: Storage.sh (sudo) inxi: 3.1.00

Benchmark #20704 - Brand: Linux Storage - FILEIO