Benchmark #20712 - pibenchmarks.com

Brand: SanDisk Extreme Pro USB
SSD (Portable)
#60 / 1,700
319
#1,005 / 1,700
#919 / 989
#130 / 145
3,228
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-26 03:19:53
#20,712
3,163
-65 (-2.06%)
Anonymous

Storage Details
SanDisk Extreme Pro USB
SSD (Portable)
31G
SSD
SanDisk
pSSD
1.8 inch
SATA
3.00
5,000
0781:5580
0x0781 (SanDisk Corp.)
0x5580 (SDCZ80 Flash Drive)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
92.2 MB/s
140.1 MB/s
141.73 MB/s
2,586 IOPS
2,699 IOPS
10,346 KB/s
10,798 KB/s
21,074 KB/s
18,637 KB/s
11,167 KB/s
10,112 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 usb-storage.quirks=0781:5580:u console=ttyS0,115200 console=tty1 root=PARTUUID=4baa94b4-f836-4f59-9069-f94e891842c5 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 444.8 MiB (11.2%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 140x36 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 58.94 GiB used: 4.29 GiB (7.3%) ID-1: /dev/mmcblk0 model: SE32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: SanDisk model: Extreme drive model: pSSD family: based SSDs size: 29.22 GiB block size: physical: 512 B logical: 512 B sata: 2.6 speed: 6.0 Gb/s rev: 0001 drive rev: 3 scheme: GPT SMART: yes state: enabled health: PASSED on: 79d 7h cycles: 1031 read: 172.37 GiB written: 427.61 GiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.22 GiB size: 28.64 GiB (98.00%) used: 4.24 GiB (14.8%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: 6378e7df-1d50-4bc7-8cb7-d1d706e4d7dd ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.5 MiB (21.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: SanDisk SDCZ80 Flash Drive type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0781:5580 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/yunohost.list 1: deb http: //forge.yunohost.org/debian/ buster stable testing unstable Processes: CPU top: 5 1: cpu: 1.6% command: monitorix pid: 1350 mem: 26.5 MiB (0.6%) 2: cpu: 0.6% command: bash pid: 2791 mem: 2.81 MiB (0.0%) 3: cpu: 0.5% command: fail2ban-server started by: python3 pid: 698 mem: 15.8 MiB (0.4%) 4: cpu: 0.5% command: sudo pid: 2778 mem: 5.68 MiB (0.1%) 5: cpu: 0.4% command: init pid: 1 mem: 8.02 MiB (0.2%) Memory top: 5 1: mem: 51.4 MiB (1.3%) command: yunohost-api started by: python2 pid: 692 cpu: 0.3% 2: mem: 50.2 MiB (1.2%) command: mysqld pid: 850 cpu: 0.1% 3: mem: 42.6 MiB (1.0%) command: php-fpm: pid: 1025 cpu: 0.1% 4: mem: 40.0 MiB (1.0%) command: php-fpm: pid: 1024 cpu: 0.2% 5: mem: 33.5 MiB (0.8%) command: rspamd: pid: 840 cpu: 0.1% Info: Processes: 165 Uptime: 11m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 usb-storage.quirks=0781:5580:u console=ttyS0,115200 
           console=tty1 root=PARTUUID=4baa94b4-f836-4f59-9069-f94e891842c5 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 444.8 MiB (11.2%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 140x36 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 58.94 GiB used: 4.29 GiB (7.3%) 
           ID-1: /dev/mmcblk0 model: SE32G size: 29.72 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: SanDisk model: Extreme drive model: pSSD 
           family: based SSDs size: 29.22 GiB block size: physical: 512 B logical: 512 B sata: 2.6 
           speed: 6.0 Gb/s rev: 0001 drive rev: 3 
           scheme: GPT 
           SMART: yes state: enabled health: PASSED on: 79d 7h cycles: 1031 read: 172.37 GiB 
           written: 427.61 GiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.22 GiB size: 28.64 GiB (98.00%) used: 4.24 GiB (14.8%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: N/A uuid: 6378e7df-1d50-4bc7-8cb7-d1d706e4d7dd 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.5 MiB (21.2%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: SanDisk SDCZ80 Flash Drive type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0781:5580 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/yunohost.list 
           1: deb http: //forge.yunohost.org/debian/ buster stable testing unstable
Processes: CPU top: 5 
           1: cpu: 1.6% command: monitorix pid: 1350 mem: 26.5 MiB (0.6%) 
           2: cpu: 0.6% command: bash pid: 2791 mem: 2.81 MiB (0.0%) 
           3: cpu: 0.5% command: fail2ban-server started by: python3 pid: 698 mem: 15.8 MiB (0.4%) 
           4: cpu: 0.5% command: sudo pid: 2778 mem: 5.68 MiB (0.1%) 
           5: cpu: 0.4% command: init pid: 1 mem: 8.02 MiB (0.2%) 
           Memory top: 5 
           1: mem: 51.4 MiB (1.3%) command: yunohost-api started by: python2 pid: 692 cpu: 0.3% 
           2: mem: 50.2 MiB (1.2%) command: mysqld pid: 850 cpu: 0.1% 
           3: mem: 42.6 MiB (1.0%) command: php-fpm: pid: 1025 cpu: 0.1% 
           4: mem: 40.0 MiB (1.0%) command: php-fpm: pid: 1024 cpu: 0.2% 
           5: mem: 33.5 MiB (0.8%) command: rspamd: pid: 840 cpu: 0.1% 
Info:      Processes: 165 Uptime: 11m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #20712 - Brand: SanDisk Extreme Pro USB