Benchmark #20731 - pibenchmarks.com

Brand: Generic USB Disk
USB Flash
#20 / 1,701
692
#958 / 1,701
#6 / 94
#9 / 89
3,992
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-26 04:25:51
#20,731
13,125
+9,133 (+69.58%)
Anonymous

Storage Details
Generic USB Disk
USB Flash
USB Flash
None

System Board Details

Operating System

Ubuntu 16.04.6 LTS
x86_64

Benchmark Results
28.5 MB/s
58.14 MB/s
4586.63 MB/s
102,914 IOPS
93 IOPS
411,658 KB/s
373 KB/s
1,961,308 KB/s
27,944 KB/s
1,531,497 KB/s
21,832 KB/s

inxi Results
System: Kernel: 4.4.0-042stab139.1 x86_64 bits: 64 compiler: gcc v: 4.4.7 parameters: quiet Console: tty 2 dm: LightDM 1.18.3 Distro: Ubuntu 16.04.6 LTS (Xenial Xerus) Machine: Message: No machine data: try newer kernel. Is dmidecode installed? Try -M --dmidecode. Memory: RAM: total: 4.00 GiB used: 1.55 GiB (38.7%) RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: Unknown-error: dmidecode was unable to generate data CPU: Topology: Single Core model: Intel Xeon E5520 bits: 64 type: MT arch: Nehalem family: 6 model-id: 1A (26) stepping: 5 microcode: 11 L2 cache: 8192 KiB bogomips: 9067 Speed: 2267 MHz min/max: N/A Core speeds (MHz): 1: 2267 2: 2267 Flags: acpi aperfmperf apic arch_perfmon bts clflush cmov constant_tsc cx16 cx8 dca de ds_cpl dtes64 dtherm dts eagerfpu ept est flexpriority fpu fxsr ht ida lahf_lm lm mca mce mmx monitor msr mtrr nonstop_tsc nx pae pat pbe pdcm pebs pge pni popcnt pse pse36 pti rdtscp rep_good retpoline sep ss sse sse2 sse4_1 sse4_2 ssse3 syscall tm tm2 tpr_shadow tsc vme vmx vnmi vpid xtopology xtpr Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Message: Device data requires root. Display: server: X.org 1.18.4 driver: fbdev,modesetting,vesa tty: 148x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Message: Device data requires root. Network: Message: Device data requires root. IF-ID-1: venet0 state: unknown speed: N/A duplex: N/A mac: N/A WAN IP: No WAN IP found. Connected to web? SSL issues? Try --no-dig Drives: Local Storage: total: N/A used: 6.53 GiB SMART Message: Required tool smartctl not installed. Check --recommends Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: N/A size: 196.74 GiB used: 6.35 GiB (3.2%) fs: ext4 block size: 4096 B dev: /dev/ploop19351p1 label: N/A uuid: N/A Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: partition size: 4.00 GiB used: 184.5 MiB (4.5%) priority: -1 dev: /dev/null label: N/A uuid: N/A Unmounted: Message: No unmounted partitions found. USB: Message: No USB data was found. Server? Sensors: Message: No sensors data was found. Is sensors configured? Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //ubuntu.mirror.serverloft.de/ubuntu xenial main restricted universe 2: deb http: //ubuntu.mirror.serverloft.de/ubuntu xenial-updates main restricted universe 3: deb https: //packages.grafana.com/oss/deb stable main 4: deb http: //ubuntu.mirror.serverloft.de/ubuntu xenial-security main universe multiverse restricted Active apt repos in: /etc/apt/sources.list.d/influxdb.list 1: deb https: //repos.influxdata.com/ubuntu bionic stable Processes: CPU top: 5 1: cpu: 16.5% command: nautilus pid: 15916 mem: 56.9 MiB (1.3%) 2: cpu: 5.1% command: [/usr/share/webm] pid: 12071 mem: 0.00 MiB (0.0%) 3: cpu: 1.6% command: fail2ban-server started by: python3 pid: 2381 mem: 185.6 MiB (4.5%) 4: cpu: 0.5% command: influxd pid: 578 mem: 167.8 MiB (4.0%) 5: cpu: 0.3% command: xvnc4 pid: 15902 mem: 59.2 MiB (1.4%) Memory top: 5 1: mem: 197.4 MiB (4.8%) command: chromium-browser pid: 18600 cpu: 0.1% 2: mem: 185.6 MiB (4.5%) command: fail2ban-server started by: python3 pid: 2381 cpu: 1.6% 3: mem: 167.8 MiB (4.0%) command: influxd pid: 578 cpu: 0.5% 4: mem: 68.1 MiB (1.6%) command: chromium-browser pid: 18990 cpu: 0.0% 5: mem: 64.3 MiB (1.5%) command: gnome-panel pid: 15913 cpu: 0.0% Info: Processes: 102 Uptime: 33d 14h 03m Init: systemd v: 229 runlevel: 3 default: 2 Compilers: gcc: 5.4.0 alt: 5 Client: shell wrapper v: 4.3.48-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.4.0-042stab139.1 x86_64 bits: 64 compiler: gcc v: 4.4.7 
           parameters: quiet 
           Console: tty 2 dm: LightDM 1.18.3 Distro: Ubuntu 16.04.6 LTS (Xenial Xerus) 
Machine:   Message: No machine data: try newer kernel. Is dmidecode installed? Try -M --dmidecode. 
Memory:    RAM: total: 4.00 GiB used: 1.55 GiB (38.7%) 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: Unknown-error: dmidecode was unable to generate data 
CPU:       Topology: Single Core model: Intel Xeon E5520 bits: 64 type: MT arch: Nehalem family: 6 
           model-id: 1A (26) stepping: 5 microcode: 11 L2 cache: 8192 KiB bogomips: 9067 
           Speed: 2267 MHz min/max: N/A Core speeds (MHz): 1: 2267 2: 2267 
           Flags: acpi aperfmperf apic arch_perfmon bts clflush cmov constant_tsc cx16 cx8 dca de 
           ds_cpl dtes64 dtherm dts eagerfpu ept est flexpriority fpu fxsr ht ida lahf_lm lm mca 
           mce mmx monitor msr mtrr nonstop_tsc nx pae pat pbe pdcm pebs pge pni popcnt pse pse36 
           pti rdtscp rep_good retpoline sep ss sse sse2 sse4_1 sse4_2 ssse3 syscall tm tm2 
           tpr_shadow tsc vme vmx vnmi vpid xtopology xtpr 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Message: Device data requires root. 
           Display: server: X.org 1.18.4 driver: fbdev,modesetting,vesa tty: 148x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Message: Device data requires root. 
Network:   Message: Device data requires root. 
           IF-ID-1: venet0 state: unknown speed: N/A duplex: N/A mac: N/A 
           WAN IP: No WAN IP found. Connected to web? SSL issues? Try --no-dig 
Drives:    Local Storage: total: N/A used: 6.53 GiB 
           SMART Message: Required tool smartctl not installed. Check --recommends 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: N/A size: 196.74 GiB used: 6.35 GiB (3.2%) fs: ext4 
           block size: 4096 B dev: /dev/ploop19351p1 label: N/A uuid: N/A 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: partition size: 4.00 GiB used: 184.5 MiB (4.5%) priority: -1 
           dev: /dev/null label: N/A uuid: N/A 
Unmounted: Message: No unmounted partitions found. 
USB:       Message: No USB data was found. Server? 
Sensors:   Message: No sensors data was found. Is sensors configured? 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //ubuntu.mirror.serverloft.de/ubuntu xenial main restricted universe
           2: deb http: //ubuntu.mirror.serverloft.de/ubuntu xenial-updates main restricted universe
           3: deb https: //packages.grafana.com/oss/deb stable main
           4: deb http: //ubuntu.mirror.serverloft.de/ubuntu xenial-security main universe multiverse restricted
           Active apt repos in: /etc/apt/sources.list.d/influxdb.list 
           1: deb https: //repos.influxdata.com/ubuntu bionic stable
Processes: CPU top: 5 
           1: cpu: 16.5% command: nautilus pid: 15916 mem: 56.9 MiB (1.3%) 
           2: cpu: 5.1% command: [/usr/share/webm] pid: 12071 mem: 0.00 MiB (0.0%) 
           3: cpu: 1.6% command: fail2ban-server started by: python3 pid: 2381 
           mem: 185.6 MiB (4.5%) 
           4: cpu: 0.5% command: influxd pid: 578 mem: 167.8 MiB (4.0%) 
           5: cpu: 0.3% command: xvnc4 pid: 15902 mem: 59.2 MiB (1.4%) 
           Memory top: 5 
           1: mem: 197.4 MiB (4.8%) command: chromium-browser pid: 18600 cpu: 0.1% 
           2: mem: 185.6 MiB (4.5%) command: fail2ban-server started by: python3 pid: 2381 
           cpu: 1.6% 
           3: mem: 167.8 MiB (4.0%) command: influxd pid: 578 cpu: 0.5% 
           4: mem: 68.1 MiB (1.6%) command: chromium-browser pid: 18990 cpu: 0.0% 
           5: mem: 64.3 MiB (1.5%) command: gnome-panel pid: 15913 cpu: 0.0% 
Info:      Processes: 102 Uptime: 33d 14h 03m Init: systemd v: 229 runlevel: 3 default: 2 
           Compilers: gcc: 5.4.0 alt: 5 Client: shell wrapper v: 4.3.48-release inxi: 3.1.00