Benchmark #20784 - pibenchmarks.com

Brand: Kingston SD Digital (SD16G)
C10 U1
#263 / 1,701
63
#1,584 / 1,701
#367 / 405
525
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-26 07:43:39
#20,784
518
-7 (-1.35%)
Anonymous
Kingston 16GB microSD

Secure Digital (SD) Card Details
Kingston SD Digital (SD16G)
C10 U1
14.2G
SD
Lexar
SD16G
SDHC
3.00
0x27
PH
3.0
01/2017
Class 10
None
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
9 MB/s
38.73 MB/s
38.05 MB/s
77 IOPS
2,177 IOPS
311 KB/s
8,708 KB/s
6,900 KB/s
201 KB/s
6,026 KB/s
193 KB/s

inxi Results
System: Host: pi4 Kernel: 4.19.115-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=a993ea8e-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: N/A dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 388.2 MiB (9.7%) gpu: 256.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 274x73 Message: Advanced graphics data unavailable in console for root. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.115-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: XX:XX:XX:XX:XX:XX IF-ID-2: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::f750:8eb3:2064:d024/64 scope: link WAN IP: 92.208.X.X Drives: Local Storage: total: 14.46 GiB used: 6.92 GiB (47.9%) ID-1: /dev/mmcblk0 model: SD16G size: 14.46 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 14.20 GiB size: 13.92 GiB (98.01%) used: 6.87 GiB (49.4%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 6ead9b69-967c-4c44-ac59-11075ed8e9a7 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 016B-16E4 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Message: No sensors data was found. Is sensors configured? Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.7% command: init pid: 1 mem: 7.67 MiB (0.2%) 2: cpu: 0.4% command: [kworker/u8:0-events_unbound] pid: 828 mem: 0.00 MiB (0.0%) 3: cpu: 0.4% command: packagekitd pid: 930 mem: 12.3 MiB (0.3%) 4: cpu: 0.1% command: systemd-journald pid: 124 mem: 6.92 MiB (0.1%) 5: cpu: 0.1% command: systemd-udevd pid: 153 mem: 3.66 MiB (0.0%) Memory top: 5 1: mem: 17.1 MiB (0.4%) command: unattended-upgrade-shutdown started by: python3 pid: 436 cpu: 0.0% 2: mem: 12.3 MiB (0.3%) command: packagekitd pid: 930 cpu: 0.4% 3: mem: 8.66 MiB (0.2%) command: udisksd pid: 314 cpu: 0.0% 4: mem: 7.67 MiB (0.2%) command: init pid: 1 cpu: 0.7% 5: mem: 7.00 MiB (0.1%) command: systemd pid: 616 cpu: 0.0% Info: Processes: 122 Uptime: 6m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) inxi: 3.1.00

inxi Results

System:    Host: pi4 Kernel: 4.19.115-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=PARTUUID=a993ea8e-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: N/A dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
Memory:    RAM: total: 3.89 GiB used: 388.2 MiB (9.7%) gpu: 256.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A 
           stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 274x73 
           Message: Advanced graphics data unavailable in console for root. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.115-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac: XX:XX:XX:XX:XX:XX 
           IF-ID-2: wlan0 state: up mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: fe80::f750:8eb3:2064:d024/64 scope: link 
           WAN IP: 92.208.X.X 
Drives:    Local Storage: total: 14.46 GiB used: 6.92 GiB (47.9%) 
           ID-1: /dev/mmcblk0 model: SD16G size: 14.46 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 14.20 GiB size: 13.92 GiB (98.01%) used: 6.87 GiB (49.4%) fs: ext4 block size: 4096 B 
           dev: /dev/mmcblk0p2 label: rootfs uuid: 6ead9b69-967c-4c44-ac59-11075ed8e9a7 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) fs: vfat block size: 512 B 
           dev: /dev/mmcblk0p1 label: boot uuid: 016B-16E4 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 
Sensors:   Message: No sensors data was found. Is sensors configured? 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.7% command: init pid: 1 mem: 7.67 MiB (0.2%) 
           2: cpu: 0.4% command: [kworker/u8:0-events_unbound] pid: 828 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.4% command: packagekitd pid: 930 mem: 12.3 MiB (0.3%) 
           4: cpu: 0.1% command: systemd-journald pid: 124 mem: 6.92 MiB (0.1%) 
           5: cpu: 0.1% command: systemd-udevd pid: 153 mem: 3.66 MiB (0.0%) 
           Memory top: 5 
           1: mem: 17.1 MiB (0.4%) command: unattended-upgrade-shutdown started by: python3 pid: 436 cpu: 0.0% 
           2: mem: 12.3 MiB (0.3%) command: packagekitd pid: 930 cpu: 0.4% 
           3: mem: 8.66 MiB (0.2%) command: udisksd pid: 314 cpu: 0.0% 
           4: mem: 7.67 MiB (0.2%) command: init pid: 1 cpu: 0.7% 
           5: mem: 7.00 MiB (0.1%) command: systemd pid: 616 cpu: 0.0% 
Info:      Processes: 122 Uptime: 6m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 
           Shell: Storage.sh (sudo) inxi: 3.1.00

Benchmark #20784 - Brand: Kingston SD Digital (SD16G)