Benchmark #20885 - pibenchmarks.com

Brand: Kingston A400S Series
SSD (2.5" SATA)
#1 / 1,675
2,843
#642 / 1,675
#620 / 984
#158 / 370
6,251
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-26 15:22:56
#20,885
5,326
-925 (-17.37%)
kosssi
Kingston A400 SSD on Pi 4 using Ubuntu 20.04 64-bit

Storage Details
Kingston A400S Series
SSD (2.5" SATA)
240G
SSD
Kingston
SA400S37240G
SATA
3.00
5,000
1d6b:55aa
0x1d6b (Linux Foundation)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Ubuntu 20.04 LTS
aarch64

Benchmark Results
89.1 MB/s
172.54 MB/s
151.71 MB/s
6,810 IOPS
4,377 IOPS
27,243 KB/s
17,508 KB/s
27,960 KB/s
15,713 KB/s
14,137 KB/s
25,571 KB/s

inxi Results
System: Kernel: 5.4.0-1008-raspi aarch64 bits: 64 compiler: gcc v: 9.3.0 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 usb-storage.quirks=174c:55aa:u net.ifnames=0 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline rootwait fixrtc quiet splash Console: tty 0 dm: N/A Distro: Ubuntu 20.04 LTS (Focal Fossa) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.70 GiB used: 277.2 MiB (7.3%) RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 150x36 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k5.4.0-1008-raspi Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 283.05 GiB used: 1.97 GiB (0.7%) ID-1: /dev/mmcblk0 model: SC64G size: 59.48 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Kingston model: SA400S37240G size: 223.57 GiB block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: SBFKB1E1 temp: 24 C scheme: MBR SMART: yes state: enabled health: PASSED cycles: 9 read: 0 GiB written: 6 GiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 223.32 GiB size: 219.77 GiB (98.41%) used: 1.91 GiB (0.9%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: writable uuid: 5fcce78f-2de3-4805-8ffa-d0f11247d5bb ID-2: /boot/firmware raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 60.6 MiB (24.0%) fs: vfat block size: 512 B dev: /dev/sda1 label: system-boot uuid: 0468-A52F ID-3: /snap/core18/1708 raw size: 48.4 MiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop0 label: N/A uuid: N/A ID-4: /snap/lxd/14808 raw size: 61.2 MiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop1 label: N/A uuid: N/A ID-5: /snap/snapd/7267 raw size: 23.5 MiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop2 label: N/A uuid: N/A Swap: Alert: No Swap data was found. Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: system-boot uuid: 0468-A52F ID-2: /dev/mmcblk0p2 size: 59.23 GiB fs: ext4 label: writable uuid: 5fcce78f-2de3-4805-8ffa-d0f11247d5bb USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //ports.ubuntu.com/ubuntu-ports focal main restricted 2: deb http: //ports.ubuntu.com/ubuntu-ports focal-updates main restricted 3: deb http: //ports.ubuntu.com/ubuntu-ports focal universe 4: deb http: //ports.ubuntu.com/ubuntu-ports focal-updates universe 5: deb http: //ports.ubuntu.com/ubuntu-ports focal multiverse 6: deb http: //ports.ubuntu.com/ubuntu-ports focal-updates multiverse 7: deb http: //ports.ubuntu.com/ubuntu-ports focal-backports main restricted universe multiverse 8: deb http: //ports.ubuntu.com/ubuntu-ports focal-security main restricted 9: deb http: //ports.ubuntu.com/ubuntu-ports focal-security universe 10: deb http: //ports.ubuntu.com/ubuntu-ports focal-security multiverse Active apt repos in: /etc/apt/sources.list.d/ubuntu-raspi2-ubuntu-ppa-focal.list 1: deb http: //ppa.launchpad.net/ubuntu-raspi2/ppa/ubuntu focal main Processes: CPU top: 5 1: cpu: 7.4% command: init pid: 1 mem: 11.8 MiB (0.3%) 2: cpu: 1.9% command: snapd pid: 1278 mem: 30.0 MiB (0.7%) 3: cpu: 1.1% command: [usb-storage] pid: 569 mem: 0.00 MiB (0.0%) 4: cpu: 1.0% command: systemd pid: 1479 mem: 9.90 MiB (0.2%) 5: cpu: 0.8% command: systemd-logind pid: 1279 mem: 6.73 MiB (0.1%) Memory top: 5 1: mem: 30.0 MiB (0.7%) command: snapd pid: 1278 cpu: 1.9% 2: mem: 18.8 MiB (0.4%) command: unattended-upgrade-shutdown started by: python3 pid: 1373 cpu: 0.3% 3: mem: 16.3 MiB (0.4%) command: multipathd pid: 1148 cpu: 0.2% 4: mem: 16.3 MiB (0.4%) command: networkd-dispatcher started by: python3 pid: 1274 cpu: 0.3% 5: mem: 13.9 MiB (0.3%) command: packagekitd pid: 1860 cpu: 0.1% Info: Processes: 144 Uptime: 1m Init: systemd v: 245 runlevel: 5 Compilers: gcc: N/A Client: shell wrapper v: 5.0.16-release inxi: 3.1.00

inxi Results

System:    Kernel: 5.4.0-1008-raspi aarch64 bits: 64 compiler: gcc v: 9.3.0 
           parameters:  coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=0 
           bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 usb-storage.quirks=174c:55aa:u 
           net.ifnames=0 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline rootwait fixrtc quiet 
           splash 
           Console: tty 0 dm: N/A Distro: Ubuntu 20.04 LTS (Focal Fossa) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.70 GiB used: 277.2 MiB (7.3%) 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 
           family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 status: Vulnerable 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 150x36 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k5.4.0-1008-raspi 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 283.05 GiB used: 1.97 GiB (0.7%) 
           ID-1: /dev/mmcblk0 model: SC64G size: 59.48 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Kingston model: SA400S37240G size: 223.57 GiB 
           block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: SBFKB1E1 temp: 24 C scheme: MBR 
           SMART: yes state: enabled health: PASSED cycles: 9 read: 0 GiB written: 6 GiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 223.32 GiB size: 219.77 GiB (98.41%) used: 1.91 GiB (0.9%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: writable 
           uuid: 5fcce78f-2de3-4805-8ffa-d0f11247d5bb 
           ID-2: /boot/firmware raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
           used: 60.6 MiB (24.0%) fs: vfat block size: 512 B dev: /dev/sda1 label: system-boot 
           uuid: 0468-A52F 
           ID-3: /snap/core18/1708 raw size: 48.4 MiB size: N/A (hidden?) used: N/A (hidden?) 
           fs: squashfs dev: /dev/loop0 label: N/A uuid: N/A 
           ID-4: /snap/lxd/14808 raw size: 61.2 MiB size: N/A (hidden?) used: N/A (hidden?) 
           fs: squashfs dev: /dev/loop1 label: N/A uuid: N/A 
           ID-5: /snap/snapd/7267 raw size: 23.5 MiB size: N/A (hidden?) used: N/A (hidden?) 
           fs: squashfs dev: /dev/loop2 label: N/A uuid: N/A 
Swap:      Alert: No Swap data was found. 
Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: system-boot uuid: 0468-A52F 
           ID-2: /dev/mmcblk0p2 size: 59.23 GiB fs: ext4 label: writable 
           uuid: 5fcce78f-2de3-4805-8ffa-d0f11247d5bb 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s 
           chip ID: 174c:55aa Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //ports.ubuntu.com/ubuntu-ports focal main restricted
           2: deb http: //ports.ubuntu.com/ubuntu-ports focal-updates main restricted
           3: deb http: //ports.ubuntu.com/ubuntu-ports focal universe
           4: deb http: //ports.ubuntu.com/ubuntu-ports focal-updates universe
           5: deb http: //ports.ubuntu.com/ubuntu-ports focal multiverse
           6: deb http: //ports.ubuntu.com/ubuntu-ports focal-updates multiverse
           7: deb http: //ports.ubuntu.com/ubuntu-ports focal-backports main restricted universe multiverse
           8: deb http: //ports.ubuntu.com/ubuntu-ports focal-security main restricted
           9: deb http: //ports.ubuntu.com/ubuntu-ports focal-security universe
           10: deb http: //ports.ubuntu.com/ubuntu-ports focal-security multiverse
           Active apt repos in: /etc/apt/sources.list.d/ubuntu-raspi2-ubuntu-ppa-focal.list 
           1: deb http: //ppa.launchpad.net/ubuntu-raspi2/ppa/ubuntu focal main
Processes: CPU top: 5 
           1: cpu: 7.4% command: init pid: 1 mem: 11.8 MiB (0.3%) 
           2: cpu: 1.9% command: snapd pid: 1278 mem: 30.0 MiB (0.7%) 
           3: cpu: 1.1% command: [usb-storage] pid: 569 mem: 0.00 MiB (0.0%) 
           4: cpu: 1.0% command: systemd pid: 1479 mem: 9.90 MiB (0.2%) 
           5: cpu: 0.8% command: systemd-logind pid: 1279 mem: 6.73 MiB (0.1%) 
           Memory top: 5 
           1: mem: 30.0 MiB (0.7%) command: snapd pid: 1278 cpu: 1.9% 
           2: mem: 18.8 MiB (0.4%) command: unattended-upgrade-shutdown started by: python3 
           pid: 1373 cpu: 0.3% 
           3: mem: 16.3 MiB (0.4%) command: multipathd pid: 1148 cpu: 0.2% 
           4: mem: 16.3 MiB (0.4%) command: networkd-dispatcher started by: python3 pid: 1274 
           cpu: 0.3% 
           5: mem: 13.9 MiB (0.3%) command: packagekitd pid: 1860 cpu: 0.1% 
Info:      Processes: 144 Uptime: 1m Init: systemd v: 245 runlevel: 5 Compilers: gcc: N/A 
           Client: shell wrapper v: 5.0.16-release inxi: 3.1.00

Benchmark #20885 - Brand: Kingston A400S Series