Benchmark #20891 - pibenchmarks.com

Brand: Generic USB Disk
USB Flash
#20 / 1,700
691
#956 / 1,700
#6 / 94
#9 / 89
3,996
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-26 15:41:26
#20,891
5,211
+1,215 (+23.32%)
Anonymous
Samsung 840 SSD on Pi 4 using reconnect SATA to USB adapter

Storage Details
Generic USB Disk
USB Flash
232.7G
USB Flash
Generic
GenericFlashDisk
2109:0711
0x2109
0x0711 (SMCWUSBT-G (no firmware))
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Manjaro ARM
aarch64

Benchmark Results
104 MB/s
136.62 MB/s
139.99 MB/s
6,073 IOPS
4,392 IOPS
24,294 KB/s
17,568 KB/s
25,384 KB/s
20,668 KB/s
15,081 KB/s
22,995 KB/s

inxi Results
System: Kernel: 4.19.114-1-MANJARO-ARM aarch64 bits: 64 compiler: gcc v: 9.2.0 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 root=PARTUUID=d34db33f-02 rw rootwait console=ttyS0,115200 console=tty1 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 kgdboc=ttyS0,115200 elevator=noop snd-bcm2835.enable_compat_alsa=0 Console: tty 0 dm: LightDM 1.30.0 Distro: Manjaro ARM Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.73 GiB used: 216.9 MiB (5.7%) RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.8 driver: N/A note: display driver n/a unloaded: modesetting alternate: fbdev tty: 214x33 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.114-1-MANJARO-ARM Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic noprefixroute scope: global IP v6: type: noprefixroute scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 291.17 GiB used: 4.66 GiB (1.6%) SMART Message: Required tool smartctl not installed. Check --recommends ID-1: /dev/mmcblk0 vendor: SanDisk model: SL64G size: 58.29 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB model: USB3.0 high speed size: 232.89 GiB block size: physical: 512 B logical: 512 B rev: 2210 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 232.65 GiB size: 228.98 GiB (98.42%) used: 4.62 GiB (2.0%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: ROOT_MNJRO uuid: 822a76e2-6287-49ee-9198-264010321f78 ID-2: /boot raw size: 213.6 MiB size: 213.4 MiB (99.89%) used: 37.9 MiB (17.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: BOOT_MNJRO uuid: 3D33-128E Swap: Alert: No Swap data was found. Unmounted: ID-1: /dev/mmcblk0p2 size: 58.05 GiB fs: ext4 label: ROOT_MNJRO uuid: 822a76e2-6287-49ee-9198-264010321f78 ID-2: /dev/sda1 size: 213.6 MiB fs: vfat label: BOOT_MNJRO uuid: 3D33-128E USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: VIA Labs VLI Product String type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 2109:0711 Sensors: Message: No sensors data was found. Is sensors configured? Repos: Active pacman repo servers in: /etc/pacman.d/mirrorlist 1: https: //manjaro.moson.org/arm-stable/$repo/$arch 2: https: //mirror.futureweb.be/manjaro/arm-stable/$repo/$arch 3: https: //quantum-mirror.hu/mirrors/pub/manjaro/arm-stable/$repo/$arch 4: https: //ftp.halifax.rwth-aachen.de/manjaro/arm-stable/$repo/$arch 5: https: //www.uex.dk/public/manjaro/arm-stable/$repo/$arch 6: https: //manjaro.ipacct.com/manjaro/arm-stable/$repo/$arch 7: https: //mirrors.dotsrc.org/manjaro/arm-stable/$repo/$arch 8: http: //manjaro.mirror.serversaustralia.com.au/arm-stable/$repo/$arch Processes: CPU top: 5 1: cpu: 1.0% command: bash pid: 6514 mem: 3.61 MiB (0.0%) 2: cpu: 0.4% command: sudo pid: 6508 mem: 6.53 MiB (0.1%) 3: cpu: 0.2% command: init pid: 1 mem: 10.6 MiB (0.2%) 4: cpu: 0.1% command: [kworker/u8:2-events_unbound] pid: 129 mem: 0.00 MiB (0.0%) 5: cpu: 0.1% command: [usb-storage] pid: 141 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 20.6 MiB (0.5%) command: smbd pid: 464 cpu: 0.0% 2: mem: 19.5 MiB (0.5%) command: networkmanager pid: 361 cpu: 0.0% 3: mem: 14.6 MiB (0.3%) command: dirmngr pid: 1102 cpu: 0.1% 4: mem: 12.6 MiB (0.3%) command: nmbd pid: 463 cpu: 0.0% 5: mem: 11.4 MiB (0.2%) command: smbd pid: 470 cpu: 0.0% Info: Processes: 121 Uptime: 15m Init: systemd v: 245 Compilers: gcc: 9.2.0 Client: shell wrapper v: 5.0.16-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.114-1-MANJARO-ARM aarch64 bits: 64 compiler: gcc v: 9.2.0 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 root=PARTUUID=d34db33f-02 rw rootwait console=ttyS0,115200 
           console=tty1 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 
           kgdboc=ttyS0,115200 elevator=noop snd-bcm2835.enable_compat_alsa=0 
           Console: tty 0 dm: LightDM 1.30.0 Distro: Manjaro ARM 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.73 GiB used: 216.9 MiB (5.7%) 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 
           family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 status: Vulnerable 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.8 driver: N/A note: display driver n/a 
           unloaded: modesetting alternate: fbdev tty: 214x33 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.114-1-MANJARO-ARM 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic noprefixroute scope: global 
           IP v6:  type: noprefixroute scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 291.17 GiB used: 4.66 GiB (1.6%) 
           SMART Message: Required tool smartctl not installed. Check --recommends 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL64G size: 58.29 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB model: USB3.0 high speed size: 232.89 GiB block size: 
           physical: 512 B logical: 512 B rev: 2210 scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 232.65 GiB size: 228.98 GiB (98.42%) used: 4.62 GiB (2.0%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: ROOT_MNJRO 
           uuid: 822a76e2-6287-49ee-9198-264010321f78 
           ID-2: /boot raw size: 213.6 MiB size: 213.4 MiB (99.89%) used: 37.9 MiB (17.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: BOOT_MNJRO uuid: 3D33-128E 
Swap:      Alert: No Swap data was found. 
Unmounted: ID-1: /dev/mmcblk0p2 size: 58.05 GiB fs: ext4 label: ROOT_MNJRO 
           uuid: 822a76e2-6287-49ee-9198-264010321f78 
           ID-2: /dev/sda1 size: 213.6 MiB fs: vfat label: BOOT_MNJRO uuid: 3D33-128E 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: VIA Labs VLI Product String type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 2109:0711 
           Sensors:   Message: No sensors data was found. Is sensors configured? 
Repos:     Active pacman repo servers in: /etc/pacman.d/mirrorlist 
           1: https: //manjaro.moson.org/arm-stable/$repo/$arch
           2: https: //mirror.futureweb.be/manjaro/arm-stable/$repo/$arch
           3: https: //quantum-mirror.hu/mirrors/pub/manjaro/arm-stable/$repo/$arch
           4: https: //ftp.halifax.rwth-aachen.de/manjaro/arm-stable/$repo/$arch
           5: https: //www.uex.dk/public/manjaro/arm-stable/$repo/$arch
           6: https: //manjaro.ipacct.com/manjaro/arm-stable/$repo/$arch
           7: https: //mirrors.dotsrc.org/manjaro/arm-stable/$repo/$arch
           8: http: //manjaro.mirror.serversaustralia.com.au/arm-stable/$repo/$arch
Processes: CPU top: 5 
           1: cpu: 1.0% command: bash pid: 6514 mem: 3.61 MiB (0.0%) 
           2: cpu: 0.4% command: sudo pid: 6508 mem: 6.53 MiB (0.1%) 
           3: cpu: 0.2% command: init pid: 1 mem: 10.6 MiB (0.2%) 
           4: cpu: 0.1% command: [kworker/u8:2-events_unbound] pid: 129 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.1% command: [usb-storage] pid: 141 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 20.6 MiB (0.5%) command: smbd pid: 464 cpu: 0.0% 
           2: mem: 19.5 MiB (0.5%) command: networkmanager pid: 361 cpu: 0.0% 
           3: mem: 14.6 MiB (0.3%) command: dirmngr pid: 1102 cpu: 0.1% 
           4: mem: 12.6 MiB (0.3%) command: nmbd pid: 463 cpu: 0.0% 
           5: mem: 11.4 MiB (0.2%) command: smbd pid: 470 cpu: 0.0% 
Info:      Processes: 121 Uptime: 15m Init: systemd v: 245 Compilers: gcc: 9.2.0 
           Client: shell wrapper v: 5.0.16-release inxi: 3.1.00

Benchmark #20891 - Brand: Generic USB Disk