Benchmark #21006 - pibenchmarks.com

Brand: Generic SSD
SSD (Portable)
#2 / 1,700
2,187
#242 / 1,700
#240 / 989
#3 / 145
18,926
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-27 03:38:36
#21,006
8,718
-10,208 (-117.09%)
Anonymous
Pi 4 with Emtec SSD

Storage Details
Generic SSD
SSD (Portable)
128G
SSD
Generic
GenericSSD
2.5 inch
SATA
1d6b:0200
0x1d6b (Linux Foundation)
0x0200 (Digital Camera)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
193 MB/s
293.77 MB/s
266.74 MB/s
10,524 IOPS
21,787 IOPS
42,096 KB/s
87,148 KB/s
34,565 KB/s
29,435 KB/s
22,228 KB/s
32,888 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/sda7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 928.1 MiB (23.3%) gpu: 128.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 140x64 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 148.97 GiB used: 7.74 GiB (5.2%) ID-1: /dev/mmcblk0 model: SC32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Emtec model: X200 size: 119.24 GiB block size: physical: 4096 B logical: 512 B rev: 1507 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 116.56 GiB size: 114.61 GiB (98.33%) used: 7.69 GiB (6.7%) fs: ext4 block size: 4096 B dev: /dev/sda7 label: root uuid: a8531729-8b88-4050-a0d2-f0494fcd5017 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 022D-74CC Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p1 size: 2.40 GiB fs: vfat label: RECOVERY uuid: F237-EDA0 ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS uuid: 57f0352f-642e-426c-81a7-b2365579962d ID-4: /dev/mmcblk0p7 size: 27.04 GiB fs: ext4 label: root uuid: a8531729-8b88-4050-a0d2-f0494fcd5017 ID-5: /dev/sda1 size: 2.40 GiB fs: vfat label: RECOVERY uuid: F237-EDA0 ID-6: /dev/sda2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-7: /dev/sda5 size: 32.0 MiB fs: ext4 label: SETTINGS uuid: 57f0352f-642e-426c-81a7-b2365579962d ID-8: /dev/sda6 size: 256.0 MiB fs: vfat label: boot uuid: 022D-74CC USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: N/A type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 6557:0200 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 150% command: java pid: 351 mem: 671.8 MiB (17.4%) 2: cpu: 1.1% command: init pid: 1 mem: 7.83 MiB (0.2%) 3: cpu: 0.8% command: packagekitd pid: 1210 mem: 12.5 MiB (0.3%) 4: cpu: 0.4% command: bash pid: 1061 mem: 2.75 MiB (0.0%) 5: cpu: 0.2% command: systemd-journald pid: 115 mem: 7.09 MiB (0.1%) Memory top: 5 1: mem: 671.8 MiB (17.4%) command: java pid: 351 cpu: 150% 2: mem: 12.5 MiB (0.3%) command: packagekitd pid: 1210 cpu: 0.8% 3: mem: 10.4 MiB (0.2%) command: vncserver-x11-core pid: 469 cpu: 0.0% 4: mem: 8.93 MiB (0.2%) command: udisksd pid: 371 cpu: 0.1% 5: mem: 7.83 MiB (0.2%) command: init pid: 1 cpu: 1.1% Info: Processes: 127 Uptime: 5m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/sda7 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 928.1 MiB (23.3%) gpu: 128.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 140x64 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 148.97 GiB used: 7.74 GiB (5.2%) 
           ID-1: /dev/mmcblk0 model: SC32G size: 29.72 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Emtec model: X200 size: 119.24 GiB block size: 
           physical: 4096 B logical: 512 B rev: 1507 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 116.56 GiB size: 114.61 GiB (98.33%) used: 7.69 GiB (6.7%) fs: ext4 
           block size: 4096 B dev: /dev/sda7 label: root 
           uuid: a8531729-8b88-4050-a0d2-f0494fcd5017 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 022D-74CC 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p1 size: 2.40 GiB fs: vfat label: RECOVERY uuid: F237-EDA0 
           ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS 
           uuid: 57f0352f-642e-426c-81a7-b2365579962d 
           ID-4: /dev/mmcblk0p7 size: 27.04 GiB fs: ext4 label: root 
           uuid: a8531729-8b88-4050-a0d2-f0494fcd5017 
           ID-5: /dev/sda1 size: 2.40 GiB fs: vfat label: RECOVERY uuid: F237-EDA0 
           ID-6: /dev/sda2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-7: /dev/sda5 size: 32.0 MiB fs: ext4 label: SETTINGS 
           uuid: 57f0352f-642e-426c-81a7-b2365579962d 
           ID-8: /dev/sda6 size: 256.0 MiB fs: vfat label: boot uuid: 022D-74CC 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: N/A type: Mass Storage driver: uas interfaces: 1 rev: 3.1 
           speed: 5 Gb/s chip ID: 6557:0200 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 150% command: java pid: 351 mem: 671.8 MiB (17.4%) 
           2: cpu: 1.1% command: init pid: 1 mem: 7.83 MiB (0.2%) 
           3: cpu: 0.8% command: packagekitd pid: 1210 mem: 12.5 MiB (0.3%) 
           4: cpu: 0.4% command: bash pid: 1061 mem: 2.75 MiB (0.0%) 
           5: cpu: 0.2% command: systemd-journald pid: 115 mem: 7.09 MiB (0.1%) 
           Memory top: 5 
           1: mem: 671.8 MiB (17.4%) command: java pid: 351 cpu: 150% 
           2: mem: 12.5 MiB (0.3%) command: packagekitd pid: 1210 cpu: 0.8% 
           3: mem: 10.4 MiB (0.2%) command: vncserver-x11-core pid: 469 cpu: 0.0% 
           4: mem: 8.93 MiB (0.2%) command: udisksd pid: 371 cpu: 0.1% 
           5: mem: 7.83 MiB (0.2%) command: init pid: 1 cpu: 1.1% 
Info:      Processes: 127 Uptime: 5m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #21006 - Brand: Generic SSD