Benchmark #21044 - pibenchmarks.com

Brand: Transcend (USDU1)
C10 V10 U1
#75 / 1,701
277
#1,372 / 1,701
#232 / 405
1,129
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-27 07:29:47
#21,044
742
-387 (-52.16%)
Anonymous

Secure Digital (SD) Card Details
Transcend (USDU1)
C10 V10 U1
14.6G
SD
Transcend
USDU1
SDHC
5.00
0x74
J
2.0
09/2018
Class 10
None
U1
V10

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
5 MB/s
41.6 MB/s
41.94 MB/s
251 IOPS
3,212 IOPS
1,006 KB/s
12,850 KB/s
9,889 KB/s
1,336 KB/s
7,555 KB/s
1,237 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 1.28 GiB (33.0%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 161x65 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link WAN IP: No WAN IP found. Connected to web? SSL issues? Try --no-dig Drives: Local Storage: total: 294.34 GiB used: 51.54 GiB (17.5%) ID-1: /dev/mmcblk0 model: USDU1 size: 14.87 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Seagate model: BUP Slim size: 223.57 GiB block size: physical: 512 B logical: 512 B rev: 0304 scheme: MBR SMART Message: A mandatory SMART command failed. Various possible causes. ID-3: /dev/sdb type: USB vendor: Sabrent model: SABRENT drive vendor: Intel drive model: SSDSC2CT060A3 family: 330/335 Series SSDs size: 55.90 GiB block size: physical: 4096 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rev: 0204 drive rev: 300i scheme: MBR SMART: yes state: enabled health: PASSED on: 102y 95d 12h cycles: 148 read: 464.38 GiB written: 386.66 GiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 14.61 GiB size: 14.32 GiB (98.00%) used: 4.54 GiB (31.7%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 ID-3: /mnt/ssd raw size: 223.57 GiB size: 219.06 GiB (97.98%) used: 46.95 GiB (21.4%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: 73116b84-3e8a-41c2-976a-3277ef82becf Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/sdb1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 ID-2: /dev/sdb2 size: 14.61 GiB fs: ext4 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:3 info: JMicron / JMicron USA JMS561U two ports SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:1561 Device-2: 2-2:2 info: Seagate RSS LLC Backup Plus Portable Drive type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0bc2:ab24 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi 2: deb http: //archive.raspbian.org/raspbian buster main contrib non-free 3: deb-src http: //archive.raspbian.org/raspbian buster main contrib non-free Active apt repos in: /etc/apt/sources.list.d/deconz.list 1: deb http: //phoscon.de/apt/deconz buster main Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb https: //deb.nodesource.com/node_10.x buster main 2: deb-src https: //deb.nodesource.com/node_10.x buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 15.0% command: iobroker.js-controller pid: 833 mem: 78.8 MiB (2.0%) 2: cpu: 2.8% command: io.javascript.0 pid: 3441 mem: 137.4 MiB (3.5%) 3: cpu: 1.8% command: deconz pid: 386 mem: 38.4 MiB (0.9%) 4: cpu: 1.7% command: io.info.0 pid: 2727 mem: 65.4 MiB (1.6%) 5: cpu: 1.5% command: io.tr-064.0 pid: 4806 mem: 58.2 MiB (1.4%) Memory top: 5 1: mem: 137.4 MiB (3.5%) command: io.javascript.0 pid: 3441 cpu: 2.8% 2: mem: 78.8 MiB (2.0%) command: iobroker.js-controller pid: 833 cpu: 15.0% 3: mem: 71.0 MiB (1.8%) command: io.shelly.0 pid: 6479 cpu: 0.9% 4: mem: 67.0 MiB (1.7%) command: io.admin.0 pid: 1808 cpu: 0.3% 5: mem: 65.4 MiB (1.6%) command: io.info.0 pid: 2727 cpu: 1.7% Info: Processes: 195 Uptime: 1h 34m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 1.28 GiB (33.0%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 161x65 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           WAN IP: No WAN IP found. Connected to web? SSL issues? Try --no-dig 
Drives:    Local Storage: total: 294.34 GiB used: 51.54 GiB (17.5%) 
           ID-1: /dev/mmcblk0 model: USDU1 size: 14.87 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Seagate model: BUP Slim size: 223.57 GiB block size: 
           physical: 512 B logical: 512 B rev: 0304 scheme: MBR 
           SMART Message: A mandatory SMART command failed. Various possible causes. 
           ID-3: /dev/sdb type: USB vendor: Sabrent model: SABRENT drive vendor: Intel 
           drive model: SSDSC2CT060A3 family: 330/335 Series SSDs size: 55.90 GiB block size: 
           physical: 4096 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rev: 0204 drive rev: 300i scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 102y 95d 12h cycles: 148 read: 464.38 GiB 
           written: 386.66 GiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 14.61 GiB size: 14.32 GiB (98.00%) used: 4.54 GiB (31.7%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
           ID-3: /mnt/ssd raw size: 223.57 GiB size: 219.06 GiB (97.98%) used: 46.95 GiB (21.4%) 
           fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A 
           uuid: 73116b84-3e8a-41c2-976a-3277ef82becf 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/sdb1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 
           ID-2: /dev/sdb2 size: 14.61 GiB fs: ext4 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:3 info: JMicron / JMicron USA JMS561U two ports SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:1561 
           Device-2: 2-2:2 info: Seagate RSS LLC Backup Plus Portable Drive type: Mass Storage 
           driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0bc2:ab24 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           2: deb http: //archive.raspbian.org/raspbian buster main contrib non-free
           3: deb-src http: //archive.raspbian.org/raspbian buster main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/deconz.list 
           1: deb http: //phoscon.de/apt/deconz buster main
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb https: //deb.nodesource.com/node_10.x buster main
           2: deb-src https: //deb.nodesource.com/node_10.x buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 15.0% command: iobroker.js-controller pid: 833 mem: 78.8 MiB (2.0%) 
           2: cpu: 2.8% command: io.javascript.0 pid: 3441 mem: 137.4 MiB (3.5%) 
           3: cpu: 1.8% command: deconz pid: 386 mem: 38.4 MiB (0.9%) 
           4: cpu: 1.7% command: io.info.0 pid: 2727 mem: 65.4 MiB (1.6%) 
           5: cpu: 1.5% command: io.tr-064.0 pid: 4806 mem: 58.2 MiB (1.4%) 
           Memory top: 5 
           1: mem: 137.4 MiB (3.5%) command: io.javascript.0 pid: 3441 cpu: 2.8% 
           2: mem: 78.8 MiB (2.0%) command: iobroker.js-controller pid: 833 cpu: 15.0% 
           3: mem: 71.0 MiB (1.8%) command: io.shelly.0 pid: 6479 cpu: 0.9% 
           4: mem: 67.0 MiB (1.7%) command: io.admin.0 pid: 1808 cpu: 0.3% 
           5: mem: 65.4 MiB (1.6%) command: io.info.0 pid: 2727 cpu: 1.7% 
Info:      Processes: 195 Uptime: 1h 34m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #21044 - Brand: Transcend (USDU1)