Benchmark #21156 - pibenchmarks.com

Brand: Generic USB Disk
USB Flash
#20 / 1,700
691
#957 / 1,700
#6 / 94
#9 / 89
3,996
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-27 15:30:21
#21,156
3,883
-113 (-2.91%)
Anonymous
Raid1 with Corsair & Crucial SSD on Rpi4

Storage Details
Generic USB Disk
USB Flash
111.7G
USB Flash
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
85.7 MB/s
283.92 MB/s
268.19 MB/s
2,707 IOPS
20,357 IOPS
10,831 KB/s
81,431 KB/s
10,747 KB/s
8,300 KB/s
10,661 KB/s
13,114 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/md127 rootfstype=ext4 elevator=deadline fsck.repair=yes rootdelay=10 rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 222.1 MiB (5.6%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 4: 1000 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 205x70 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 283.06 GiB used: 1.50 GiB (0.5%) ID-1: /dev/mmcblk0 model: SC64G size: 59.48 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Corsair model: Force LS SSD family: Driven SSDs size: 111.79 GiB block size: physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rev: S9FM02.0 temp: 30 C scheme: MBR SMART: yes state: enabled health: PASSED on: 320d 4h cycles: 802 read: 4019 GiB written: 6672 GiB ID-3: /dev/sdb type: USB vendor: Crucial model: CT120BX500SSD1 size: 111.79 GiB block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: M6CR013 temp: 52 C scheme: MBR SMART: yes state: enabled health: PASSED on: 3 hrs cycles: 41 Message: No Optical or Floppy data was found. RAID: Supported md-raid types: raid1 linear raid0 raid6 raid5 raid4 raid10 Device-1: md127 type: mdraid status: active Components: online: sdb1~c1 sda1~c0 Info: raid: mirror blocks: 117121472 report: 2/2 UU chunk size: N/A super blocks: 1.2 Partition: ID-1: / raw size: 111.70 GiB size: 109.44 GiB (97.98%) used: 1.44 GiB (1.3%) fs: ext4 block size: 4096 B dev: /dev/md127 label: N/A uuid: 113ea39e-c45b-4ceb-a1bd-34a5a386e855 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 61.5 MiB (24.4%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p2 size: 59.22 GiB fs: ext4 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa Device-2: 2-2:3 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 4.9% command: init pid: 1 mem: 7.92 MiB (0.2%) 2: cpu: 0.8% command: [kworker/u8:0-events_unbound] pid: 7 mem: 0.00 MiB (0.0%) 3: cpu: 0.8% command: [kworker/u8:1-events_unbound] pid: 45 mem: 0.00 MiB (0.0%) 4: cpu: 0.8% command: smartd pid: 1629 mem: 3.47 MiB (0.0%) 5: cpu: 0.6% command: systemd-journald pid: 248 mem: 6.28 MiB (0.1%) Memory top: 5 1: mem: 7.92 MiB (0.2%) command: init pid: 1 cpu: 4.9% 2: mem: 6.53 MiB (0.1%) command: systemd pid: 925 cpu: 0.1% 3: mem: 6.28 MiB (0.1%) command: systemd-journald pid: 248 cpu: 0.6% 4: mem: 6.05 MiB (0.1%) command: sshd: pid: 919 cpu: 0.1% 5: mem: 5.48 MiB (0.1%) command: systemd-logind pid: 499 cpu: 0.2% Info: Processes: 137 Uptime: 2m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/md127 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootdelay=10 rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 222.1 MiB (5.6%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 
           4: 1000 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 205x70 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 283.06 GiB used: 1.50 GiB (0.5%) 
           ID-1: /dev/mmcblk0 model: SC64G size: 59.48 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Corsair model: Force LS SSD family: Driven SSDs 
           size: 111.79 GiB block size: physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s 
           rev: S9FM02.0 temp: 30 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 320d 4h cycles: 802 read: 4019 GiB 
           written: 6672 GiB 
           ID-3: /dev/sdb type: USB vendor: Crucial model: CT120BX500SSD1 size: 111.79 GiB 
           block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: M6CR013 temp: 52 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 3 hrs cycles: 41 
           Message: No Optical or Floppy data was found. 
RAID:      Supported md-raid types: raid1 linear raid0 raid6 raid5 raid4 raid10 
           Device-1: md127 type: mdraid status: active Components: online: sdb1~c1 sda1~c0 
           Info: raid: mirror blocks: 117121472 report: 2/2 UU chunk size: N/A super blocks: 1.2 
Partition: ID-1: / raw size: 111.70 GiB size: 109.44 GiB (97.98%) used: 1.44 GiB (1.3%) fs: ext4 
           block size: 4096 B dev: /dev/md127 label: N/A 
           uuid: 113ea39e-c45b-4ceb-a1bd-34a5a386e855 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 61.5 MiB (24.4%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p2 size: 59.22 GiB fs: ext4 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa 
           Device-2: 2-2:3 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 4.9% command: init pid: 1 mem: 7.92 MiB (0.2%) 
           2: cpu: 0.8% command: [kworker/u8:0-events_unbound] pid: 7 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.8% command: [kworker/u8:1-events_unbound] pid: 45 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.8% command: smartd pid: 1629 mem: 3.47 MiB (0.0%) 
           5: cpu: 0.6% command: systemd-journald pid: 248 mem: 6.28 MiB (0.1%) 
           Memory top: 5 
           1: mem: 7.92 MiB (0.2%) command: init pid: 1 cpu: 4.9% 
           2: mem: 6.53 MiB (0.1%) command: systemd pid: 925 cpu: 0.1% 
           3: mem: 6.28 MiB (0.1%) command: systemd-journald pid: 248 cpu: 0.6% 
           4: mem: 6.05 MiB (0.1%) command: sshd: pid: 919 cpu: 0.1% 
           5: mem: 5.48 MiB (0.1%) command: systemd-logind pid: 499 cpu: 0.2% 
Info:      Processes: 137 Uptime: 2m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.1.00