Benchmark #21197 - pibenchmarks.com

Brand: SanDisk SD Ultra A1 (SB32G)
A1 C10
#159 / 1,701
114
#1,400 / 1,701
#253 / 405
1,074
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-27 20:45:40
#21,197
1,133
+59 (+5.21%)
Anonymous
sd card

Secure Digital (SD) Card Details
SanDisk SD Ultra A1 (SB32G)
A1 C10
29.5G
SD
SanDisk
SB32G
SDHC
5.00
0x03
SD
8.0
05/2019
Class 10
A1
None
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
18.9 MB/s
36.9 MB/s
29.19 MB/s
786 IOPS
3,118 IOPS
3,146 KB/s
12,474 KB/s
9,782 KB/s
3,608 KB/s
8,866 KB/s
2,578 KB/s

inxi Results
System: Kernel: 4.19.115-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d9b3f436-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 484.7 MiB (12.2%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev tty: 80x24 Message: Advanced graphics data unavailable in console for root. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.115-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 3.67 TiB used: 3.38 TiB (92.3%) ID-1: /dev/mmcblk0 model: SB32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Seagate model: ST4000DM005-2DP166 family: Barracuda 3.5 size: 3.64 TiB block size: physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rotation: 5980 rpm rev: 0001 temp: 37 C scheme: GPT SMART: yes state: enabled health: PASSED on: 1y 363d 14h cycles: 121 read: 3.95 TiB written: 4.69 TiB Pre-Fail: attribute: Spin_Retry_Count value: 100 worst: 100 threshold: 97 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.47 GiB size: 28.95 GiB (98.24%) used: 8.93 GiB (30.8%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 24eaa08b-10f2-49e0-8283-359f7eb1a0b6 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 69D5-9B27 ID-3: /home//dd raw size: 3.58 TiB size: 3.58 TiB (100.00%) used: 3.37 TiB (94.1%) fs: ntfs block size: 4096 B dev: /dev/sda2 label: Respaldo uuid: 322A427D2A423DDB ID-4: /media/pi/PI_ROOT raw size: 58.62 GiB size: 57.58 GiB (98.23%) used: 5.47 GiB (9.5%) fs: ext4 block size: 4096 B dev: /dev/sda3 label: PI_ROOT uuid: 9d97a4df-a4eb-4b09-92b6-bb1ccfade0ee Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: partition size: 1023.0 MiB used: 2.3 MiB (0.2%) priority: -2 dev: /dev/sda4 label: N/A uuid: 826239be-bb20-4103-afc3-61b1f62b34a7 ID-2: swap-2 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -3 file: /var/swap Unmounted: ID-1: /dev/sda1 size: 128.0 MiB fs: N/A label: N/A uuid: N/A USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: KYE Systems (Mouse Systems) type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 0458:00ae Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa Sensors: Message: No sensors data was found. Is sensors configured? Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main 2: deb http: //ftp.cl.debian.org/debian/ buster main 3: deb http: //ftp.de.debian.org/debian jessie main Active apt repos in: /etc/apt/sources.list.d/teamviewer.list 1: deb http: //linux.teamviewer.com/deb stable main Processes: CPU top: 5 1: cpu: 4.9% command: transmission-daemon pid: 505 mem: 22.2 MiB (0.5%) 2: cpu: 0.5% command: [kworker/u8:2-events_unbound] pid: 13189 mem: 0.00 MiB (0.0%) 3: cpu: 0.3% command: xorg pid: 583 mem: 56.9 MiB (1.4%) 4: cpu: 0.2% command: teamviewerd pid: 612 mem: 11.6 MiB (0.2%) 5: cpu: 0.2% command: sshd: pid: 13175 mem: 6.09 MiB (0.1%) Memory top: 5 1: mem: 74.0 MiB (1.8%) command: teamviewer pid: 1196 cpu: 0.1% 2: mem: 62.1 MiB (1.5%) command: mysqld pid: 606 cpu: 0.1% 3: mem: 56.9 MiB (1.4%) command: xorg pid: 583 cpu: 0.3% 4: mem: 32.1 MiB (0.8%) command: vncserver-x11-core pid: 520 cpu: 0.0% 5: mem: 27.7 MiB (0.7%) command: lxpanel pid: 1141 cpu: 0.1% Info: Processes: 187 Uptime: 1d 10h 22m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.115-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 
           root=PARTUUID=d9b3f436-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           quiet splash plymouth.ignore-serial-consoles 
           Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 484.7 MiB (12.2%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev 
           tty: 80x24 
           Message: Advanced graphics data unavailable in console for root. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.115-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 3.67 TiB used: 3.38 TiB (92.3%) 
           ID-1: /dev/mmcblk0 model: SB32G size: 29.72 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Seagate model: ST4000DM005-2DP166 
           family: Barracuda 3.5 size: 3.64 TiB block size: physical: 4096 B logical: 512 B 
           sata: 3.1 speed: 6.0 Gb/s rotation: 5980 rpm rev: 0001 temp: 37 C 
           scheme: GPT 
           SMART: yes state: enabled health: PASSED on: 1y 363d 14h cycles: 121 read: 3.95 TiB 
           written: 4.69 TiB Pre-Fail: attribute: Spin_Retry_Count value: 100 worst: 100 
           threshold: 97 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.47 GiB size: 28.95 GiB (98.24%) used: 8.93 GiB (30.8%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 24eaa08b-10f2-49e0-8283-359f7eb1a0b6 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 69D5-9B27 
           ID-3: /home//dd raw size: 3.58 TiB size: 3.58 TiB (100.00%) 
           used: 3.37 TiB (94.1%) fs: ntfs block size: 4096 B dev: /dev/sda2 label: Respaldo 
           uuid: 322A427D2A423DDB 
           ID-4: /media/pi/PI_ROOT raw size: 58.62 GiB size: 57.58 GiB (98.23%) 
           used: 5.47 GiB (9.5%) fs: ext4 block size: 4096 B dev: /dev/sda3 label: PI_ROOT 
           uuid: 9d97a4df-a4eb-4b09-92b6-bb1ccfade0ee 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: partition size: 1023.0 MiB used: 2.3 MiB (0.2%) priority: -2 
           dev: /dev/sda4 label: N/A uuid: 826239be-bb20-4103-afc3-61b1f62b34a7 
           ID-2: swap-2 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -3 file: /var/swap 
Unmounted: ID-1: /dev/sda1 size: 128.0 MiB fs: N/A label: N/A uuid: N/A 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: KYE Systems (Mouse Systems) type: Keyboard,Mouse 
           driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 0458:00ae 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-2: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa 
           Sensors:   Message: No sensors data was found. Is sensors configured? 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           2: deb http: //ftp.cl.debian.org/debian/ buster main
           3: deb http: //ftp.de.debian.org/debian jessie main
           Active apt repos in: /etc/apt/sources.list.d/teamviewer.list 
           1: deb http: //linux.teamviewer.com/deb stable main
Processes: CPU top: 5 
           1: cpu: 4.9% command: transmission-daemon pid: 505 mem: 22.2 MiB (0.5%) 
           2: cpu: 0.5% command: [kworker/u8:2-events_unbound] pid: 13189 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.3% command: xorg pid: 583 mem: 56.9 MiB (1.4%) 
           4: cpu: 0.2% command: teamviewerd pid: 612 mem: 11.6 MiB (0.2%) 
           5: cpu: 0.2% command: sshd: pid: 13175 mem: 6.09 MiB (0.1%) 
           Memory top: 5 
           1: mem: 74.0 MiB (1.8%) command: teamviewer pid: 1196 cpu: 0.1% 
           2: mem: 62.1 MiB (1.5%) command: mysqld pid: 606 cpu: 0.1% 
           3: mem: 56.9 MiB (1.4%) command: xorg pid: 583 cpu: 0.3% 
           4: mem: 32.1 MiB (0.8%) command: vncserver-x11-core pid: 520 cpu: 0.0% 
           5: mem: 27.7 MiB (0.7%) command: lxpanel pid: 1141 cpu: 0.1% 
Info:      Processes: 187 Uptime: 1d 10h 22m Init: systemd v: 241 runlevel: 5 
           target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper 
           v: 5.0.3-release inxi: 3.1.00

Benchmark #21197 - Brand: SanDisk SD Ultra A1 (SB32G)