Benchmark #21394 - pibenchmarks.com

Brand: PNY SD High Performance (SD08G)
C10 U1
#388 / 1,665
25
#1,514 / 1,665
#324 / 389
632
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-28 14:16:17
#21,394
779
+147 (+18.87%)
Anonymous

Secure Digital (SD) Card Details
PNY SD High Performance (SD08G)
C10 U1
7.2G
SD
PNY
SD08G
SDHC
3.00
0x27
PH
3.0
05/2016
Class 10
None
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
18.5 MB/s
39.28 MB/s
38.22 MB/s
65 IOPS
2,361 IOPS
263 KB/s
9,447 KB/s
7,226 KB/s
1,394 KB/s
8,425 KB/s
713 KB/s

inxi Results
System: Host: smb01 Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 199.6 MiB (5.0%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 317x86 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::66c9:1767:38eb:2803/64 scope: link IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: 47.32.X.X Drives: Local Storage: total: 484.36 GiB used: 1.52 GiB (0.3%) ID-1: /dev/mmcblk0 model: SD08G size: 7.42 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB model: SSK SSK Storage size: 476.94 GiB block size: physical: 4096 B logical: 512 B rev: 0206 scheme: GPT SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 7.17 GiB size: 7.03 GiB (98.01%) used: 1.40 GiB (19.9%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 ID-3: /mnt/data raw size: 476.94 GiB size: 468.45 GiB (98.22%) used: 72.0 MiB (0.0%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: data uuid: 758b2777-5bf1-49a5-80cb-0c0e4a954061 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.1:3 info: VIA Labs ports: 5 rev: 2.1 speed: 480 Mb/s chip ID: 2109:2817 Hub: 1-1.1.3:4 info: VIA Labs ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:2817 Device-1: 1-1.1.5:5 info: VIA Labs type: Billboard driver: N/A interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 2109:8888 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Hub: 2-1:2 info: VIA Labs ports: 4 rev: 3.1 speed: 5 Gb/s chip ID: 2109:0817 Hub: 2-1.3:3 info: VIA Labs ports: 4 rev: 3.1 speed: 5 Gb/s chip ID: 2109:0817 Device-2: 2-1.3.1:4 info: JMicron / JMicron USA type: Mass Storage driver: uas interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 152d:0562 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.9% command: [kworker/u8:1-events_unbound] pid: 1332 mem: 0.00 MiB (0.0%) 2: cpu: 0.2% command: bash pid: 1312 mem: 2.80 MiB (0.0%) 3: cpu: 0.0% command: init pid: 1 mem: 7.83 MiB (0.2%) 4: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 5: cpu: 0.0% command: [rcu_gp] pid: 3 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 7.83 MiB (0.2%) command: init pid: 1 cpu: 0.0% 2: mem: 6.94 MiB (0.1%) command: systemd-journald pid: 108 cpu: 0.0% 3: mem: 6.46 MiB (0.1%) command: systemd pid: 591 cpu: 0.0% 4: mem: 6.11 MiB (0.1%) command: sshd: pid: 584 cpu: 0.0% 5: mem: 5.40 MiB (0.1%) command: systemd-logind pid: 332 cpu: 0.0% Info: Processes: 120 Uptime: 59m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) inxi: 3.1.00

inxi Results

System:    Host: smb01 Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
Memory:    RAM: total: 3.89 GiB used: 199.6 MiB (5.0%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A 
           stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 317x86 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: fe80::66c9:1767:38eb:2803/64 scope: link 
           IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX 
           WAN IP: 47.32.X.X 
Drives:    Local Storage: total: 484.36 GiB used: 1.52 GiB (0.3%) 
           ID-1: /dev/mmcblk0 model: SD08G size: 7.42 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB model: SSK SSK Storage size: 476.94 GiB block size: physical: 4096 B logical: 512 B 
           rev: 0206 scheme: GPT 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 7.17 GiB size: 7.03 GiB (98.01%) used: 1.40 GiB (19.9%) fs: ext4 block size: 4096 B 
           dev: /dev/mmcblk0p2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B 
           dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
           ID-3: /mnt/data raw size: 476.94 GiB size: 468.45 GiB (98.22%) used: 72.0 MiB (0.0%) fs: ext4 block size: 4096 B 
           dev: /dev/sda1 label: data uuid: 758b2777-5bf1-49a5-80cb-0c0e4a954061 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.1:3 info: VIA Labs ports: 5 rev: 2.1 speed: 480 Mb/s chip ID: 2109:2817 
           Hub: 1-1.1.3:4 info: VIA Labs ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:2817 
           Device-1: 1-1.1.5:5 info: VIA Labs type: Billboard driver: N/A interfaces: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 2109:8888 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 
           Hub: 2-1:2 info: VIA Labs ports: 4 rev: 3.1 speed: 5 Gb/s chip ID: 2109:0817 
           Hub: 2-1.3:3 info: VIA Labs ports: 4 rev: 3.1 speed: 5 Gb/s chip ID: 2109:0817 
           Device-2: 2-1.3.1:4 info: JMicron / JMicron USA type: Mass Storage driver: uas interfaces: 1 rev: 3.2 speed: 5 Gb/s 
           chip ID: 152d:0562 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.9% command: [kworker/u8:1-events_unbound] pid: 1332 mem: 0.00 MiB (0.0%) 
           2: cpu: 0.2% command: bash pid: 1312 mem: 2.80 MiB (0.0%) 
           3: cpu: 0.0% command: init pid: 1 mem: 7.83 MiB (0.2%) 
           4: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.0% command: [rcu_gp] pid: 3 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 7.83 MiB (0.2%) command: init pid: 1 cpu: 0.0% 
           2: mem: 6.94 MiB (0.1%) command: systemd-journald pid: 108 cpu: 0.0% 
           3: mem: 6.46 MiB (0.1%) command: systemd pid: 591 cpu: 0.0% 
           4: mem: 6.11 MiB (0.1%) command: sshd: pid: 584 cpu: 0.0% 
           5: mem: 5.40 MiB (0.1%) command: systemd-logind pid: 332 cpu: 0.0% 
Info:      Processes: 120 Uptime: 59m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) 
           inxi: 3.1.00

Benchmark #21394 - Brand: PNY SD High Performance (SD08G)