Benchmark #21551 - pibenchmarks.com

Brand: SanDisk SSD Plus
SSD (2.5" SATA)
#2 / 1,677
1,729
#416 / 1,677
#402 / 984
#47 / 370
7,640
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-29 07:44:38
#21,551
3,051
-4,589 (-150.41%)
Anonymous
Old Corsair 120GB SSD (CSSD-F120GB3-BK)

Storage Details
SanDisk SSD Plus
SSD (2.5" SATA)
SSD
SanDisk
SSDPLUS240GB
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
aarch64

Benchmark Results
102 MB/s
2,825 IOPS
2,193 IOPS
11,303 KB/s
8,773 KB/s
12,808 KB/s
14,572 KB/s
8,980 KB/s
10,037 KB/s

inxi Results
System: Kernel: 4.19.75v64 aarch64 bits: 32 compiler: gcc v: 7.4.0 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1680x1050M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 elevator=deadline quiet bootmenutimeout=10 datadev=UUID=795de3c6-c8e1-4587-a8b3-158f6991e981 qmap=de Console: tty 1 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.79 GiB used: 345.0 MiB (8.9%) gpu: 160.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: N/A Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75v64 Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 252.36 GiB used: 53.3 MiB (0.0%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL32G size: 28.79 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: SanDisk model: SSD PLUS 240GB size: 223.58 GiB block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: UF4500RL temp: 33 C scheme: MBR SMART: yes state: enabled health: PASSED on: 2 hrs cycles: 22 read: 3 KiB written: 14 KiB Old-Age: media wearout: 100 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: /boot raw size: 28.78 GiB size: 28.77 GiB (99.97%) used: 53.3 MiB (0.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: N/A uuid: 8CA1-B335 Swap: Alert: No Swap data was found. Unmounted: ID-1: /dev/sda1 size: 127.0 MiB fs: ntfs label: N/A uuid: N/A ID-2: /dev/sda2 size: 223.45 GiB fs: ext4 label: berryboot uuid: 795de3c6-c8e1-4587-a8b3-158f6991e981 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: Logitech Corded Keyboard K280e type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 046d:c328 Device-2: 1-1.4:4 info: Avago Pte. ADNS-5700 Optical Mouse Controller (3-button) type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s chip ID: 192f:0416 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-3: 2-1:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 3.7% command: lib/systemd/systemd pid: 1 mem: 8.13 MiB (0.2%) 2: cpu: 0.6% command: [usb-storage] pid: 87 mem: 0.00 MiB (0.0%) 3: cpu: 0.3% command: [loop0] pid: 155 mem: 0.00 MiB (0.0%) 4: cpu: 0.2% command: systemd-journald pid: 202 mem: 7.63 MiB (0.2%) 5: cpu: 0.2% command: systemd-udevd pid: 238 mem: 3.70 MiB (0.0%) Memory top: 5 1: mem: 8.13 MiB (0.2%) command: lib/systemd/systemd pid: 1 cpu: 3.7% 2: mem: 7.63 MiB (0.2%) command: systemd-journald pid: 202 cpu: 0.2% 3: mem: 6.46 MiB (0.1%) command: systemd pid: 783 cpu: 0.0% 4: mem: 5.52 MiB (0.1%) command: systemd-logind pid: 428 cpu: 0.1% 5: mem: 4.18 MiB (0.1%) command: wpa_supplicant pid: 432 cpu: 0.0% Info: Processes: 127 Uptime: 2m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.75v64 aarch64 bits: 32 compiler: gcc v: 7.4.0 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1680x1050M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 elevator=deadline quiet bootmenutimeout=10 
           datadev=UUID=795de3c6-c8e1-4587-a8b3-158f6991e981 qmap=de 
           Console: tty 1 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.79 GiB used: 345.0 MiB (8.9%) gpu: 160.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 
           family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: N/A 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.75v64 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 252.36 GiB used: 53.3 MiB (0.0%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL32G size: 28.79 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: SanDisk model: SSD PLUS 240GB size: 223.58 GiB 
           block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: UF4500RL temp: 33 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 2 hrs cycles: 22 read: 3 KiB 
           written: 14 KiB Old-Age: media wearout: 100 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: /boot raw size: 28.78 GiB size: 28.77 GiB (99.97%) used: 53.3 MiB (0.2%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p1 label: N/A uuid: 8CA1-B335 
Swap:      Alert: No Swap data was found. 
Unmounted: ID-1: /dev/sda1 size: 127.0 MiB fs: ntfs label: N/A uuid: N/A 
           ID-2: /dev/sda2 size: 223.45 GiB fs: ext4 label: berryboot 
           uuid: 795de3c6-c8e1-4587-a8b3-158f6991e981 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: Logitech Corded Keyboard K280e type: Keyboard,HID 
           driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 046d:c328 
           Device-2: 1-1.4:4 info: Avago Pte. ADNS-5700 Optical Mouse Controller (3-button) 
           type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s 
           chip ID: 192f:0416 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-3: 2-1:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s 
           chip ID: 174c:55aa Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 3.7% command: lib/systemd/systemd pid: 1 mem: 8.13 MiB (0.2%) 
           2: cpu: 0.6% command: [usb-storage] pid: 87 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.3% command: [loop0] pid: 155 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.2% command: systemd-journald pid: 202 mem: 7.63 MiB (0.2%) 
           5: cpu: 0.2% command: systemd-udevd pid: 238 mem: 3.70 MiB (0.0%) 
           Memory top: 5 
           1: mem: 8.13 MiB (0.2%) command: lib/systemd/systemd pid: 1 cpu: 3.7% 
           2: mem: 7.63 MiB (0.2%) command: systemd-journald pid: 202 cpu: 0.2% 
           3: mem: 6.46 MiB (0.1%) command: systemd pid: 783 cpu: 0.0% 
           4: mem: 5.52 MiB (0.1%) command: systemd-logind pid: 428 cpu: 0.1% 
           5: mem: 4.18 MiB (0.1%) command: wpa_supplicant pid: 432 cpu: 0.0% 
Info:      Processes: 127 Uptime: 2m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #21551 - Brand: SanDisk SSD Plus