Benchmark #21668 - pibenchmarks.com

Brand: Undentified JMicron USB to SATA Adapter
SSD (2.5" SATA)
#12 / 1,700
931
#433 / 1,700
#417 / 989
#52 / 370
7,549
	Amazon.com AliExpress

Overview
2020-04-29 15:05:10
#21,668
8,403
+854 (+10.16%)
Anonymous
Toshiba SSD using Qnine NVME to USB adapter

Storage Details
Undentified JMicron USB to SATA Adapter
SSD (2.5" SATA)
238.5G
SSD
JMicron
JMicronTech
3.00
5,000
1d6b:0562
0x1d6b (Linux Foundation)
0x0562 (Netac Portable SSD Z6s)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
191 MB/s
310.95 MB/s
308.53 MB/s
8,284 IOPS
22,164 IOPS
33,139 KB/s
88,658 KB/s
28,880 KB/s
27,066 KB/s
20,388 KB/s
33,581 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 fsck.repair=yes ip=192.168.X.X root=/dev/sda1 rootfstype=ext4 rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.97 GiB used: 649.9 MiB (32.2%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: IP v6: scope: link IF-ID-3: hassio state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-4: veth09304f3 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth13e315a state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth470fc9c state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth50d4b78 state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: veth5c2ca8d state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: veth8b46908 state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: vethaa8ead6 state: up speed: 10000 Mbps duplex: full mac: IF-ID-11: vethf1b66a1 state: up speed: 10000 Mbps duplex: full mac: IF-ID-12: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 268.29 GiB used: 9.00 GiB (3.4%) ID-1: /dev/mmcblk0 vendor: Lexar model: N/A size: 29.82 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: JMicron Tech model: N/A size: 238.47 GiB block size: physical: 4096 B logical: 512 B rev: 0204 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 238.47 GiB size: 233.73 GiB (98.01%) used: 4.47 GiB (1.9%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: 68d25ea4-30f6-479d-b573-f65556b5ca5e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 ID-3: /var/lib/docker/overlay2/465e906b54e413b94375e71a9cebc1653bc8eb2ed2ee58a94745f81e274d3fa7/merged raw size: N/A size: 233.73 GiB used: 4.47 GiB (1.9%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-4: /var/lib/docker/overlay2/5513bd65f05aca0f1e84a4701831fc478ea167f1182e0b35f85db6d50e257f4d/merged raw size: N/A size: 233.73 GiB used: 4.47 GiB (1.9%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-5: /var/lib/docker/overlay2/8260e3bc83ea6f045f5d105e7cde3549bae3d47e8a7bc93005fd9180c96248bb/merged raw size: N/A size: 233.73 GiB used: 4.47 GiB (1.9%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-6: /var/lib/docker/overlay2/84c20d9cab027b344a1cd6947be8101a8f8b24012904ea94450660393b3f12a5/merged raw size: N/A size: 233.73 GiB used: 4.47 GiB (1.9%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-7: /var/lib/docker/overlay2/9797e70a394d008f02a0c18317def3c8e704320f1ceed9023921b02a3bcb0d08/merged raw size: N/A size: 233.73 GiB used: 4.47 GiB (1.9%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-8: /var/lib/docker/overlay2/9cd86da4609a1be298cc93f6fa51664dc4574280aa1fecc4821b16fea179c81c/merged raw size: N/A size: 233.73 GiB used: 4.47 GiB (1.9%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-9: /var/lib/docker/overlay2/9cf32c1a65e08ab6b776c4833c4a173d5e9955217f0656bf00b54c287b3771f2/merged raw size: N/A size: 233.73 GiB used: 4.47 GiB (1.9%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-10: /var/lib/docker/overlay2/9e2bdac0a1e981c5a30c9c4110f777c078d4d7db8ee5ffe3f26c29ef390bfe13/merged raw size: N/A size: 233.73 GiB used: 4.47 GiB (1.9%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-11: /var/lib/docker/overlay2/d71d8add4e61f191d02a337986b27b2b822e943732b308db7aeebe7d64913fbc/merged raw size: N/A size: 233.73 GiB used: 4.47 GiB (1.9%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-12: /var/lib/docker/overlay2/dbb704540d3e057b9a90d7796d4c574779d4f142f7d2fc0035689626b6279b1b/merged raw size: N/A size: 233.73 GiB used: 4.47 GiB (1.9%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-13: /var/lib/docker/overlay2/f242a34e1a947214c8612a887dfaf198c2f84a1e6a7d65cafc0d824163d1e834/merged raw size: N/A size: 233.73 GiB used: 4.47 GiB (1.9%) fs: overlay source: ERR-102 label: N/A uuid: N/A Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 17.5 MiB (17.5%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p2 size: 29.57 GiB fs: ext4 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: JMicron / JMicron USA type: Mass Storage driver: uas interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 152d:0562 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 9.1% command: dockerd pid: 585 mem: 86.6 MiB (4.4%) 2: cpu: 1.9% command: python3 pid: 6688 mem: 75.0 MiB (3.8%) 3: cpu: 0.7% command: pulseaudio pid: 2726 mem: 5.88 MiB (0.3%) 4: cpu: 0.4% command: python3 pid: 1343 mem: 41.9 MiB (2.1%) 5: cpu: 0.3% command: [vchiq-slot/0] pid: 62 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 86.6 MiB (4.4%) command: dockerd pid: 585 cpu: 9.1% 2: mem: 75.0 MiB (3.8%) command: python3 pid: 6688 cpu: 1.9% 3: mem: 41.9 MiB (2.1%) command: python3 pid: 1343 cpu: 0.4% 4: mem: 35.8 MiB (1.8%) command: docker pid: 871 cpu: 0.0% 5: mem: 27.5 MiB (1.4%) command: containerd pid: 584 cpu: 0.2% Info: Processes: 220 Uptime: 1h 24m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 fsck.repair=yes 
           ip=192.168.X.X root=/dev/sda1 rootfstype=ext4 rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
           Memory:    RAM: total: 1.97 GiB used: 649.9 MiB (32.2%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 80x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-3: hassio state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-4: veth09304f3 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: veth13e315a state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: veth470fc9c state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: veth50d4b78 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-8: veth5c2ca8d state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-9: veth8b46908 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-10: vethaa8ead6 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-11: vethf1b66a1 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-12: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 268.29 GiB used: 9.00 GiB (3.4%) 
           ID-1: /dev/mmcblk0 vendor: Lexar model: N/A size: 29.82 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: JMicron Tech model: N/A size: 238.47 GiB block size: 
           physical: 4096 B logical: 512 B rev: 0204 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 238.47 GiB size: 233.73 GiB (98.01%) used: 4.47 GiB (1.9%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: N/A uuid: 68d25ea4-30f6-479d-b573-f65556b5ca5e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
           ID-3: /var/lib/docker/overlay2/465e906b54e413b94375e71a9cebc1653bc8eb2ed2ee58a94745f81e274d3fa7/merged raw size: N/A size: 233.73 GiB used: 4.47 GiB (1.9%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-4: /var/lib/docker/overlay2/5513bd65f05aca0f1e84a4701831fc478ea167f1182e0b35f85db6d50e257f4d/merged raw size: N/A size: 233.73 GiB used: 4.47 GiB (1.9%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-5: /var/lib/docker/overlay2/8260e3bc83ea6f045f5d105e7cde3549bae3d47e8a7bc93005fd9180c96248bb/merged raw size: N/A size: 233.73 GiB used: 4.47 GiB (1.9%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-6: /var/lib/docker/overlay2/84c20d9cab027b344a1cd6947be8101a8f8b24012904ea94450660393b3f12a5/merged raw size: N/A size: 233.73 GiB used: 4.47 GiB (1.9%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-7: /var/lib/docker/overlay2/9797e70a394d008f02a0c18317def3c8e704320f1ceed9023921b02a3bcb0d08/merged raw size: N/A size: 233.73 GiB used: 4.47 GiB (1.9%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-8: /var/lib/docker/overlay2/9cd86da4609a1be298cc93f6fa51664dc4574280aa1fecc4821b16fea179c81c/merged raw size: N/A size: 233.73 GiB used: 4.47 GiB (1.9%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-9: /var/lib/docker/overlay2/9cf32c1a65e08ab6b776c4833c4a173d5e9955217f0656bf00b54c287b3771f2/merged raw size: N/A size: 233.73 GiB used: 4.47 GiB (1.9%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-10: /var/lib/docker/overlay2/9e2bdac0a1e981c5a30c9c4110f777c078d4d7db8ee5ffe3f26c29ef390bfe13/merged raw size: N/A size: 233.73 GiB used: 4.47 GiB (1.9%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-11: /var/lib/docker/overlay2/d71d8add4e61f191d02a337986b27b2b822e943732b308db7aeebe7d64913fbc/merged raw size: N/A size: 233.73 GiB used: 4.47 GiB (1.9%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-12: /var/lib/docker/overlay2/dbb704540d3e057b9a90d7796d4c574779d4f142f7d2fc0035689626b6279b1b/merged raw size: N/A size: 233.73 GiB used: 4.47 GiB (1.9%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-13: /var/lib/docker/overlay2/f242a34e1a947214c8612a887dfaf198c2f84a1e6a7d65cafc0d824163d1e834/merged raw size: N/A size: 233.73 GiB used: 4.47 GiB (1.9%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 17.5 MiB (17.5%) priority: -2 
           file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p2 size: 29.57 GiB fs: ext4 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: JMicron / JMicron USA type: Mass Storage driver: uas 
           interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 152d:0562 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 9.1% command: dockerd pid: 585 mem: 86.6 MiB (4.4%) 
           2: cpu: 1.9% command: python3 pid: 6688 mem: 75.0 MiB (3.8%) 
           3: cpu: 0.7% command: pulseaudio pid: 2726 mem: 5.88 MiB (0.3%) 
           4: cpu: 0.4% command: python3 pid: 1343 mem: 41.9 MiB (2.1%) 
           5: cpu: 0.3% command: [vchiq-slot/0] pid: 62 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 86.6 MiB (4.4%) command: dockerd pid: 585 cpu: 9.1% 
           2: mem: 75.0 MiB (3.8%) command: python3 pid: 6688 cpu: 1.9% 
           3: mem: 41.9 MiB (2.1%) command: python3 pid: 1343 cpu: 0.4% 
           4: mem: 35.8 MiB (1.8%) command: docker pid: 871 cpu: 0.0% 
           5: mem: 27.5 MiB (1.4%) command: containerd pid: 584 cpu: 0.2% 
Info:      Processes: 220 Uptime: 1h 24m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #21668 - Brand: Undentified JMicron USB to SATA Adapter