Benchmark #21771 - pibenchmarks.com

Brand: SanDisk SD Ultra A1 (SC64G)
A1 C10 U1
#21 / 1,701
670
#1,304 / 1,701
#178 / 405
1,265
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-30 02:42:45
#21,771
1,339
+74 (+5.53%)
Anonymous

Secure Digital (SD) Card Details
SanDisk SD Ultra A1 (SC64G)
A1 C10 U1
59.2G
SD
SanDisk
SC64G
SDXC
5.00
0x03
SD
8.0
10/2019
Class 10
A1
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
30.6 MB/s
41.32 MB/s
40.97 MB/s
875 IOPS
3,245 IOPS
3,501 KB/s
12,980 KB/s
9,918 KB/s
3,896 KB/s
9,871 KB/s
2,817 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=ea7d04d6-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 225.0 MiB (5.6%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 750 2: 750 3: 750 4: 750 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 59.48 GiB used: 2.92 GiB (4.9%) ID-1: /dev/mmcblk0 model: SC64G size: 59.48 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 59.22 GiB size: 58.26 GiB (98.37%) used: 2.87 GiB (4.9%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 6341-C9E5 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.7% command: init pid: 1 mem: 7.99 MiB (0.2%) 2: cpu: 0.2% command: packagekitd pid: 1261 mem: 12.7 MiB (0.3%) 3: cpu: 0.1% command: dbus-daemon pid: 319 mem: 3.47 MiB (0.0%) 4: cpu: 0.1% command: bash pid: 1112 mem: 2.77 MiB (0.0%) 5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 12.7 MiB (0.3%) command: packagekitd pid: 1261 cpu: 0.2% 2: mem: 10.0 MiB (0.2%) command: udisksd pid: 324 cpu: 0.0% 3: mem: 7.99 MiB (0.2%) command: init pid: 1 cpu: 0.7% 4: mem: 7.88 MiB (0.2%) command: systemd-journald pid: 107 cpu: 0.0% 5: mem: 7.15 MiB (0.1%) command: systemd pid: 661 cpu: 0.0% Info: Processes: 135 Uptime: 15m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=ea7d04d6-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 225.0 MiB (5.6%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 750 2: 750 3: 750 4: 750 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 80x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 59.48 GiB used: 2.92 GiB (4.9%) 
           ID-1: /dev/mmcblk0 model: SC64G size: 59.48 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 59.22 GiB size: 58.26 GiB (98.37%) used: 2.87 GiB (4.9%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 6341-C9E5 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.7% command: init pid: 1 mem: 7.99 MiB (0.2%) 
           2: cpu: 0.2% command: packagekitd pid: 1261 mem: 12.7 MiB (0.3%) 
           3: cpu: 0.1% command: dbus-daemon pid: 319 mem: 3.47 MiB (0.0%) 
           4: cpu: 0.1% command: bash pid: 1112 mem: 2.77 MiB (0.0%) 
           5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 12.7 MiB (0.3%) command: packagekitd pid: 1261 cpu: 0.2% 
           2: mem: 10.0 MiB (0.2%) command: udisksd pid: 324 cpu: 0.0% 
           3: mem: 7.99 MiB (0.2%) command: init pid: 1 cpu: 0.7% 
           4: mem: 7.88 MiB (0.2%) command: systemd-journald pid: 107 cpu: 0.0% 
           5: mem: 7.15 MiB (0.1%) command: systemd pid: 661 cpu: 0.0% 
Info:      Processes: 135 Uptime: 15m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #21771 - Brand: SanDisk SD Ultra A1 (SC64G)