Benchmark #21785 - pibenchmarks.com

Brand: SanDisk SD Ultra (SL16G)
C10
#58 / 1,701
334
#1,505 / 1,701
#63 / 405
796
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-30 03:35:03
#21,785
838
+42 (+5.01%)
Anonymous
Pi Model B

Secure Digital (SD) Card Details
SanDisk SD Ultra (SL16G)
C10
13.2G
SD
SanDisk
SL16G
SDHC
3.00
0x03
SD
8.0
04/2017
Class 10
None
None
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B 1.2
Raspberry Pi 3 Model B Rev 1.2
Raspberry Pi Foundation
1,200
400
450
50

Operating System

Raspbian GNU/Linux 9 (stretch)
armv7l

Benchmark Results
10.8 MB/s
22.1 MB/s
22.07 MB/s
742 IOPS
2,035 IOPS
2,971 KB/s
8,142 KB/s
7,573 KB/s
2,820 KB/s
6,352 KB/s
2,229 KB/s

inxi Results
perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LC_CTYPE = "UTF-8", LC_TERMINAL = "iTerm2", LC_TERMINAL_VERSION = "3.3.9", LANG = "en_GB.UTF-8" are supported and installed on your system. perl: warning: Falling back to a fallback locale ("en_GB.UTF-8"). System: Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 Memory: RAM: total: 991.6 MiB used: 528.3 MiB (53.3%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 307 Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 4: 1200 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 272x66 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.66-v7+ Network: Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-1: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 14.84 GiB used: 4.15 GiB (28.0%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL16G size: 14.84 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 13.17 GiB size: 12.83 GiB (97.48%) used: 4.13 GiB (32.2%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p7 label: root uuid: 1f3c1ea2-0207-4dce-a1c1-05f4fd671852 ID-2: /boot raw size: 69.0 MiB size: 67.9 MiB (98.44%) used: 22.3 MiB (32.9%) fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 2A0E-CB74 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 17.0 MiB (17.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p1 size: 1.57 GiB fs: vfat label: RECOVERY uuid: BD17-17E3 ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS uuid: 7f98a028-8e23-461f-990d-541645d12e6b USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi 2: deb http: //ppa.launchpad.net/webupd8team/java/ubuntu trusty main 3: deb-src http: //ppa.launchpad.net/webupd8team/java/ubuntu trusty main Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb https: //deb.nodesource.com/node_9.x stretch main 2: deb-src https: //deb.nodesource.com/node_9.x stretch main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ stretch main ui Processes: CPU top: 5 1: cpu: 21.6% command: java pid: 13639 mem: 400.5 MiB (41.0%) 2: cpu: 0.3% command: sshd: pid: 18943 mem: 5.59 MiB (0.5%) 3: cpu: 0.3% command: -bash pid: 18963 mem: 4.01 MiB (0.4%) 4: cpu: 0.1% command: sshd: pid: 18960 mem: 3.66 MiB (0.3%) 5: cpu: 0.1% command: bash pid: 18991 mem: 2.66 MiB (0.2%) Memory top: 5 1: mem: 400.5 MiB (41.0%) command: java pid: 13639 cpu: 21.6% 2: mem: 35.3 MiB (3.6%) command: pm2 pid: 577 cpu: 0.0% 3: mem: 14.0 MiB (1.4%) command: smbd pid: 18830 cpu: 0.0% 4: mem: 12.9 MiB (1.3%) command: smbd pid: 13008 cpu: 0.0% 5: mem: 6.62 MiB (0.6%) command: packagekitd pid: 3745 cpu: 0.0% Info: Processes: 120 Uptime: 14d 18h 29m Init: systemd v: 232 runlevel: 5 Compilers: gcc: 6.3.0 alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.1.00

inxi Results

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
	LANGUAGE = (unset),
	LC_ALL = (unset),
	LC_CTYPE = "UTF-8",
	LC_TERMINAL = "iTerm2",
	LC_TERMINAL_VERSION = "3.3.9",
	LANG = "en_GB.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_GB.UTF-8").
System:    Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=640 
           bcm2708_fb.fbheight=480 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 
           vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 
           console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline 
           fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 
           Memory:    RAM: total: 991.6 MiB used: 528.3 MiB (53.3%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 307 
           Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 
           4: 1200 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 272x66 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.66-v7+ 
Network:   Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB 
           driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-1: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 14.84 GiB used: 4.15 GiB (28.0%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL16G size: 14.84 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 13.17 GiB size: 12.83 GiB (97.48%) used: 4.13 GiB (32.2%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p7 label: root 
           uuid: 1f3c1ea2-0207-4dce-a1c1-05f4fd671852 
           ID-2: /boot raw size: 69.0 MiB size: 67.9 MiB (98.44%) used: 22.3 MiB (32.9%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 2A0E-CB74 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 17.0 MiB (17.0%) priority: -2 
           file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p1 size: 1.57 GiB fs: vfat label: RECOVERY uuid: BD17-17E3 
           ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS 
           uuid: 7f98a028-8e23-461f-990d-541645d12e6b 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:9514 
           Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter 
           type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:ec00 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
           2: deb http: //ppa.launchpad.net/webupd8team/java/ubuntu trusty main
           3: deb-src http: //ppa.launchpad.net/webupd8team/java/ubuntu trusty main
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb https: //deb.nodesource.com/node_9.x stretch main
           2: deb-src https: //deb.nodesource.com/node_9.x stretch main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ stretch main ui
Processes: CPU top: 5 
           1: cpu: 21.6% command: java pid: 13639 mem: 400.5 MiB (41.0%) 
           2: cpu: 0.3% command: sshd: pid: 18943 mem: 5.59 MiB (0.5%) 
           3: cpu: 0.3% command: -bash pid: 18963 mem: 4.01 MiB (0.4%) 
           4: cpu: 0.1% command: sshd: pid: 18960 mem: 3.66 MiB (0.3%) 
           5: cpu: 0.1% command: bash pid: 18991 mem: 2.66 MiB (0.2%) 
           Memory top: 5 
           1: mem: 400.5 MiB (41.0%) command: java pid: 13639 cpu: 21.6% 
           2: mem: 35.3 MiB (3.6%) command: pm2 pid: 577 cpu: 0.0% 
           3: mem: 14.0 MiB (1.4%) command: smbd pid: 18830 cpu: 0.0% 
           4: mem: 12.9 MiB (1.3%) command: smbd pid: 13008 cpu: 0.0% 
           5: mem: 6.62 MiB (0.6%) command: packagekitd pid: 3745 cpu: 0.0% 
Info:      Processes: 120 Uptime: 14d 18h 29m Init: systemd v: 232 runlevel: 5 Compilers: 
           gcc: 6.3.0 alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.1.00

Benchmark #21785 - Brand: SanDisk SD Ultra (SL16G)