Benchmark #21795 - pibenchmarks.com

Brand: Crucial BX500 Series
SSD (2.5" SATA)
#6 / 1,677
1,145
#622 / 1,677
#600 / 984
#147 / 370
6,340
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-30 05:03:09
#21,795
2,685
-3,655 (-136.13%)
Anonymous
RB4 SSD

Storage Details
Crucial BX500 Series
SSD (2.5" SATA)
120G
SSD
Crucial
CT120BX500SSD1
2.5 inch
SATA
2.10
480
2109:1561
0x2109
0x1561
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
30 MB/s
30.94 MB/s
30.69 MB/s
3,942 IOPS
3,712 IOPS
15,769 KB/s
14,848 KB/s
12,891 KB/s
10,739 KB/s
10,906 KB/s
11,631 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=97709165-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 447.5 MiB (11.2%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 122x51 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: No WAN IP found. Connected to web? SSL issues? Try --no-dig Drives: Local Storage: total: 126.63 GiB used: 7.08 GiB (5.6%) ID-1: /dev/mmcblk0 model: SU16G size: 14.84 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Sabrent model: SABRENT drive vendor: Crucial drive model: CT120BX500SSD1 size: 111.79 GiB block size: physical: 4096 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: 0204 drive rev: M6CR013 temp: 35 C scheme: MBR SMART: yes state: enabled health: PASSED cycles: 16 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 111.54 GiB size: 109.74 GiB (98.39%) used: 7.03 GiB (6.4%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9969-E3D2 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p2 size: 14.58 GiB fs: ext4 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 9969-E3D2 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.2:3 info: JMicron / JMicron USA JMS561U two ports SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 152d:1561 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 4.3% command: init pid: 1 mem: 8.07 MiB (0.2%) 2: cpu: 2.0% command: xorg pid: 697 mem: 51.1 MiB (1.3%) 3: cpu: 1.1% command: mysqld pid: 685 mem: 115.8 MiB (2.9%) 4: cpu: 0.8% command: systemd-journald pid: 123 mem: 6.95 MiB (0.1%) 5: cpu: 0.8% command: pi-greeter pid: 1204 mem: 73.3 MiB (1.8%) Memory top: 5 1: mem: 115.8 MiB (2.9%) command: mysqld pid: 685 cpu: 1.1% 2: mem: 73.3 MiB (1.8%) command: pi-greeter pid: 1204 cpu: 0.8% 3: mem: 51.1 MiB (1.3%) command: xorg pid: 697 cpu: 2.0% 4: mem: 27.7 MiB (0.7%) command: php-fpm: pid: 457 cpu: 0.3% 5: mem: 17.1 MiB (0.4%) command: unattended-upgrade-shutdown started by: python3 pid: 471 cpu: 0.3% Info: Processes: 160 Uptime: 1m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=97709165-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 447.5 MiB (11.2%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 122x51 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP: No WAN IP found. Connected to web? SSL issues? Try --no-dig 
Drives:    Local Storage: total: 126.63 GiB used: 7.08 GiB (5.6%) 
           ID-1: /dev/mmcblk0 model: SU16G size: 14.84 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Sabrent model: SABRENT drive vendor: Crucial 
           drive model: CT120BX500SSD1 size: 111.79 GiB block size: physical: 4096 B 
           logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: 0204 drive rev: M6CR013 temp: 35 C scheme: MBR 
           SMART: yes state: enabled health: PASSED cycles: 16 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 111.54 GiB size: 109.74 GiB (98.39%) used: 7.03 GiB (6.4%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9969-E3D2 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p2 size: 14.58 GiB fs: ext4 label: rootfs 
           uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 9969-E3D2 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.2:3 info: JMicron / JMicron USA JMS561U two ports SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 2.1 speed: 480 Mb/s 
           chip ID: 152d:1561 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 4.3% command: init pid: 1 mem: 8.07 MiB (0.2%) 
           2: cpu: 2.0% command: xorg pid: 697 mem: 51.1 MiB (1.3%) 
           3: cpu: 1.1% command: mysqld pid: 685 mem: 115.8 MiB (2.9%) 
           4: cpu: 0.8% command: systemd-journald pid: 123 mem: 6.95 MiB (0.1%) 
           5: cpu: 0.8% command: pi-greeter pid: 1204 mem: 73.3 MiB (1.8%) 
           Memory top: 5 
           1: mem: 115.8 MiB (2.9%) command: mysqld pid: 685 cpu: 1.1% 
           2: mem: 73.3 MiB (1.8%) command: pi-greeter pid: 1204 cpu: 0.8% 
           3: mem: 51.1 MiB (1.3%) command: xorg pid: 697 cpu: 2.0% 
           4: mem: 27.7 MiB (0.7%) command: php-fpm: pid: 457 cpu: 0.3% 
           5: mem: 17.1 MiB (0.4%) command: unattended-upgrade-shutdown started by: python3 
           pid: 471 cpu: 0.3% 
Info:      Processes: 160 Uptime: 1m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #21795 - Brand: Crucial BX500 Series