Benchmark #21802 - pibenchmarks.com

Brand: Longsys Foresee eMMC (SLD32)
MMC (Embedded)
#531 / 1,665
14
#914 / 1,665
#37 / 75
#37 / 92
4,374

Overview
2020-04-30 05:40:08
#21,802
2,114
-2,260 (-106.91%)
ls
ks

Storage Details
Longsys Foresee eMMC (SLD32)
MMC (Embedded)
28.7G
MMC
Foresee
SLD32
Embedded
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
20.7 MB/s
19.28 MB/s
15.56 MB/s
2,885 IOPS
2,910 IOPS
11,541 KB/s
11,642 KB/s
9,650 KB/s
10,056 KB/s
9,381 KB/s
9,325 KB/s

inxi Results
System: Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.97 GiB used: 696.5 MiB (34.6%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: noprefixroute scope: link IF-ID-3: hassio state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-4: veth0eaadfe state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth1a463cf state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth221d78e state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth571d219 state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: vethd4e9dc2 state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: vethde421f9 state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: vethfd024d5 state: up speed: 10000 Mbps duplex: full mac: IF-ID-11: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 28.91 GiB used: 18.33 GiB (63.4%) ID-1: /dev/mmcblk0 model: SLD32G size: 28.91 GiB block size: physical: 512 B logical: 512 B rev: 0x8 scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 28.65 GiB size: 28.18 GiB (98.35%) used: 9.14 GiB (32.4%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 ID-3: /var/lib/docker/overlay2/0139bba00988ce01314a98eb305e5ba46cfffce7f89615005b1f085dd2b09831/merged raw size: N/A size: 28.18 GiB used: 9.14 GiB (32.4%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-4: /var/lib/docker/overlay2/3314e1065ab5b97761451c132d7815432be15fd44e719836e876bec1b088a525/merged raw size: N/A size: 28.18 GiB used: 9.14 GiB (32.4%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-5: /var/lib/docker/overlay2/340c6cab9c5624adacdf7191889f8fa2eaf2c07e869752e41f7b4e9ee0f727a7/merged raw size: N/A size: 28.18 GiB used: 9.14 GiB (32.4%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-6: /var/lib/docker/overlay2/3662b8db4c8589aff00f19f4dac46883deff0a71eab68f39f6b241752d6646b1/merged raw size: N/A size: 28.18 GiB used: 9.14 GiB (32.4%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-7: /var/lib/docker/overlay2/6070095c5280124669c1e2f1ba77ce68289f3e3b4fe20310eb1693fe90ca3279/merged raw size: N/A size: 28.18 GiB used: 9.14 GiB (32.4%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-8: /var/lib/docker/overlay2/82a3f01eaf8690aee09ff9e304667e0acf48f592eb2a19288647134362287afb/merged raw size: N/A size: 28.18 GiB used: 9.14 GiB (32.4%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-9: /var/lib/docker/overlay2/c75245ea96f0ad82490d20a1f9714cf577fa19603ac3db400f36ba5b2f308d4b/merged raw size: N/A size: 28.18 GiB used: 9.14 GiB (32.4%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-10: /var/lib/docker/overlay2/ccdbe020bf748f060007690d8834111beece1c65e941bd97d1b3458eded75a5d/merged raw size: N/A size: 28.18 GiB used: 9.14 GiB (32.4%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-11: /var/lib/docker/overlay2/eccba47e6349268c6643bcd5dc4bc8208cd7532020fdd7679ee38e86a7d23b2b/merged raw size: N/A size: 28.18 GiB used: 9.14 GiB (32.4%) fs: overlay source: ERR-102 label: N/A uuid: N/A Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 8.2 MiB (8.3%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.4:3 info: Arduino SA Mega 2560 R3 (CDC ACM) type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 1.1 speed: 12 Mb/s chip ID: 2341:0042 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 12.4% command: python3 pid: 5846 mem: 159.6 MiB (8.2%) 2: cpu: 0.6% command: pulseaudio pid: 3019 mem: 6.13 MiB (0.3%) 3: cpu: 0.3% command: coredns pid: 2871 mem: 23.9 MiB (1.2%) 4: cpu: 0.3% command: systemd pid: 17555 mem: 6.52 MiB (0.3%) 5: cpu: 0.3% command: -bash pid: 17575 mem: 3.68 MiB (0.1%) Memory top: 5 1: mem: 159.6 MiB (8.2%) command: python3 pid: 5846 cpu: 12.4% 2: mem: 154.4 MiB (7.9%) command: pihole-ftl pid: 720 cpu: 0.1% 3: mem: 48.8 MiB (2.5%) command: dockerd pid: 691 cpu: 0.2% 4: mem: 38.1 MiB (1.9%) command: python3 pid: 1625 cpu: 0.2% 5: mem: 35.8 MiB (1.8%) command: docker pid: 1206 cpu: 0.0% Info: Processes: 193 Uptime: 6h 15m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
           Memory:    RAM: total: 1.97 GiB used: 696.5 MiB (34.6%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 80x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.118-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  type: noprefixroute scope: link 
           IF-ID-3: hassio state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-4: veth0eaadfe state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: veth1a463cf state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: veth221d78e state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: veth571d219 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-8: vethd4e9dc2 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-9: vethde421f9 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-10: vethfd024d5 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-11: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 28.91 GiB used: 18.33 GiB (63.4%) 
           ID-1: /dev/mmcblk0 model: SLD32G size: 28.91 GiB block size: physical: 512 B 
           logical: 512 B rev: 0x8 scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 28.65 GiB size: 28.18 GiB (98.35%) used: 9.14 GiB (32.4%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
           ID-3: /var/lib/docker/overlay2/0139bba00988ce01314a98eb305e5ba46cfffce7f89615005b1f085dd2b09831/merged raw size: N/A size: 28.18 GiB used: 9.14 GiB (32.4%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-4: /var/lib/docker/overlay2/3314e1065ab5b97761451c132d7815432be15fd44e719836e876bec1b088a525/merged raw size: N/A size: 28.18 GiB used: 9.14 GiB (32.4%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-5: /var/lib/docker/overlay2/340c6cab9c5624adacdf7191889f8fa2eaf2c07e869752e41f7b4e9ee0f727a7/merged raw size: N/A size: 28.18 GiB used: 9.14 GiB (32.4%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-6: /var/lib/docker/overlay2/3662b8db4c8589aff00f19f4dac46883deff0a71eab68f39f6b241752d6646b1/merged raw size: N/A size: 28.18 GiB used: 9.14 GiB (32.4%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-7: /var/lib/docker/overlay2/6070095c5280124669c1e2f1ba77ce68289f3e3b4fe20310eb1693fe90ca3279/merged raw size: N/A size: 28.18 GiB used: 9.14 GiB (32.4%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-8: /var/lib/docker/overlay2/82a3f01eaf8690aee09ff9e304667e0acf48f592eb2a19288647134362287afb/merged raw size: N/A size: 28.18 GiB used: 9.14 GiB (32.4%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-9: /var/lib/docker/overlay2/c75245ea96f0ad82490d20a1f9714cf577fa19603ac3db400f36ba5b2f308d4b/merged raw size: N/A size: 28.18 GiB used: 9.14 GiB (32.4%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-10: /var/lib/docker/overlay2/ccdbe020bf748f060007690d8834111beece1c65e941bd97d1b3458eded75a5d/merged raw size: N/A size: 28.18 GiB used: 9.14 GiB (32.4%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-11: /var/lib/docker/overlay2/eccba47e6349268c6643bcd5dc4bc8208cd7532020fdd7679ee38e86a7d23b2b/merged raw size: N/A size: 28.18 GiB used: 9.14 GiB (32.4%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 8.2 MiB (8.3%) priority: -2 
           file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.4:3 info: Arduino SA Mega 2560 R3 (CDC ACM) 
           type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 1.1 speed: 12 Mb/s 
           chip ID: 2341:0042 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 12.4% command: python3 pid: 5846 mem: 159.6 MiB (8.2%) 
           2: cpu: 0.6% command: pulseaudio pid: 3019 mem: 6.13 MiB (0.3%) 
           3: cpu: 0.3% command: coredns pid: 2871 mem: 23.9 MiB (1.2%) 
           4: cpu: 0.3% command: systemd pid: 17555 mem: 6.52 MiB (0.3%) 
           5: cpu: 0.3% command: -bash pid: 17575 mem: 3.68 MiB (0.1%) 
           Memory top: 5 
           1: mem: 159.6 MiB (8.2%) command: python3 pid: 5846 cpu: 12.4% 
           2: mem: 154.4 MiB (7.9%) command: pihole-ftl pid: 720 cpu: 0.1% 
           3: mem: 48.8 MiB (2.5%) command: dockerd pid: 691 cpu: 0.2% 
           4: mem: 38.1 MiB (1.9%) command: python3 pid: 1625 cpu: 0.2% 
           5: mem: 35.8 MiB (1.8%) command: docker pid: 1206 cpu: 0.0% 
Info:      Processes: 193 Uptime: 6h 15m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #21802 - Brand: Longsys Foresee eMMC (SLD32)