Benchmark #21829 - pibenchmarks.com

Brand: Western Digital Green
SSD (2.5" SATA)
#38 / 1,700
446
#884 / 1,700
#841 / 989
#283 / 370
4,773
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-30 08:13:02
#21,829
2,550
-2,223 (-87.18%)
Anonymous

Storage Details
Western Digital Green
SSD (2.5" SATA)
120G
SSD
WDC
WDS120G2G0A-00JH30
2.5 inch
SATA
2.10
480
174c:55aa
0x174c (ASMedia Technology Inc.)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
1,400
400
450 (-50)

Operating System

Raspbian GNU/Linux 9 (stretch)
armv7l

Benchmark Results
35.3 MB/s
35.11 MB/s
34.66 MB/s
2,691 IOPS
2,384 IOPS
10,764 KB/s
9,538 KB/s
14,121 KB/s
12,169 KB/s
9,203 KB/s
11,962 KB/s

inxi Results
System: Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=800 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty1 root=/dev/sda7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: 1a020d3 Memory: RAM: total: 1002.1 MiB used: 201.5 MiB (20.1%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.19.2 driver: fbturbo tty: 117x62 Message: Advanced graphics data unavailable in console for root. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:5 chip ID: 0424:7800 IF: eth0 state: down mac: IF-ID-1: wlan0 state: up mac: IP v4: scope: global broadcast: IP v6: type: noprefixroute scope: global IP v6: scope: link WAN IP: Drives: Local Storage: total: 111.80 GiB used: 4.90 GiB (4.4%) ID-1: /dev/sda type: USB vendor: Western Digital model: WDS120G2G0A-00JH30 size: 111.80 GiB block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: UE510000 temp: 34 C scheme: MBR SMART: yes state: enabled health: PASSED on: 2 hrs cycles: 70 read: 0 KiB written: 0 KiB Old-Age: media wearout: 100 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 57.63 GiB size: 56.60 GiB (98.21%) used: 4.87 GiB (8.6%) fs: ext4 block size: 4096 B dev: /dev/sda7 label: root uuid: 961badfc-34be-43ea-8ff3-bc7049880e72 ID-2: /boot raw size: 69.0 MiB size: 67.9 MiB (98.44%) used: 22.4 MiB (33.0%) fs: vfat block size: 512 B dev: /dev/sda6 label: boot uuid: A4CE-F0E6 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/sda1 size: 1.73 GiB fs: vfat label: RECOVERY uuid: 141A-1077 ID-2: /dev/sda2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-3: /dev/sda5 size: 32.0 MiB fs: ext4 label: SETTINGS uuid: 0086bb08-c6ee-44a3-aae2-000640a37b3c USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 Device-2: 1-1.1.2:4 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c52b Device-3: 1-1.3:6 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 174c:55aa Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ stretch main ui Processes: CPU top: 5 1: cpu: 100% command: powerdisplay.py started by: python pid: 457 mem: 31.2 MiB (3.3%) 2: cpu: 71.0% command: gettemps started by: python pid: 2646 mem: 20.3 MiB (2.1%) 3: cpu: 8.0% command: [kworker/1:1-mm_] pid: 32 mem: 0.00 MiB (0.0%) 4: cpu: 6.0% command: plugcontrolmain started by: python pid: 758 mem: 20.2 MiB (2.1%) 5: cpu: 2.6% command: powermonmain started by: python pid: 2664 mem: 5.60 MiB (0.6%) Memory top: 5 1: mem: 31.2 MiB (3.3%) command: powerdisplay.py started by: python pid: 457 cpu: 100% 2: mem: 20.3 MiB (2.1%) command: gettemps started by: python pid: 2646 cpu: 71.0% 3: mem: 20.2 MiB (2.1%) command: plugcontrolmain started by: python pid: 758 cpu: 6.0% 4: mem: 19.5 MiB (2.1%) command: apache2 pid: 493 cpu: 0.0% 5: mem: 10.8 MiB (1.1%) command: packagekitd pid: 1536 cpu: 0.2% Info: Processes: 133 Uptime: 3m Init: systemd v: 232 runlevel: 3 target: multi-user.target Compilers: gcc: 6.3.0 alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=800 
           bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty1 root=/dev/sda7 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 
           rev: 1a020d3 Memory:    RAM: total: 1002.1 MiB used: 201.5 MiB (20.1%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 
           Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 
           4: 1400 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.19.2 driver: fbturbo tty: 117x62 
           Message: Advanced graphics data unavailable in console for root. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:5 
           chip ID: 0424:7800 
           IF: eth0 state: down mac:  
           IF-ID-1: wlan0 state: up mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  type: noprefixroute scope: global 
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 111.80 GiB used: 4.90 GiB (4.4%) 
           ID-1: /dev/sda type: USB vendor: Western Digital model: WDS120G2G0A-00JH30 
           size: 111.80 GiB block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s 
           rev: UE510000 temp: 34 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 2 hrs cycles: 70 read: 0 KiB 
           written: 0 KiB Old-Age: media wearout: 100 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 57.63 GiB size: 56.60 GiB (98.21%) used: 4.87 GiB (8.6%) fs: ext4 
           block size: 4096 B dev: /dev/sda7 label: root 
           uuid: 961badfc-34be-43ea-8ff3-bc7049880e72 
           ID-2: /boot raw size: 69.0 MiB size: 67.9 MiB (98.44%) used: 22.4 MiB (33.0%) fs: vfat 
           block size: 512 B dev: /dev/sda6 label: boot uuid: A4CE-F0E6 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/sda1 size: 1.73 GiB fs: vfat label: RECOVERY uuid: 141A-1077 
           ID-2: /dev/sda2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-3: /dev/sda5 size: 32.0 MiB fs: ext4 label: SETTINGS 
           uuid: 0086bb08-c6ee-44a3-aae2-000640a37b3c 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 
           Device-2: 1-1.1.2:4 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID 
           driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s 
           chip ID: 046d:c52b 
           Device-3: 1-1.3:6 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s 
           chip ID: 174c:55aa Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ stretch main ui
Processes: CPU top: 5 
           1: cpu: 100% command: powerdisplay.py started by: python pid: 457 mem: 31.2 MiB (3.3%) 
           2: cpu: 71.0% command: gettemps started by: python pid: 2646 mem: 20.3 MiB (2.1%) 
           3: cpu: 8.0% command: [kworker/1:1-mm_] pid: 32 mem: 0.00 MiB (0.0%) 
           4: cpu: 6.0% command: plugcontrolmain started by: python pid: 758 mem: 20.2 MiB (2.1%) 
           5: cpu: 2.6% command: powermonmain started by: python pid: 2664 mem: 5.60 MiB (0.6%) 
           Memory top: 5 
           1: mem: 31.2 MiB (3.3%) command: powerdisplay.py started by: python pid: 457 cpu: 100% 
           2: mem: 20.3 MiB (2.1%) command: gettemps started by: python pid: 2646 cpu: 71.0% 
           3: mem: 20.2 MiB (2.1%) command: plugcontrolmain started by: python pid: 758 cpu: 6.0% 
           4: mem: 19.5 MiB (2.1%) command: apache2 pid: 493 cpu: 0.0% 
           5: mem: 10.8 MiB (1.1%) command: packagekitd pid: 1536 cpu: 0.2% 
Info:      Processes: 133 Uptime: 3m Init: systemd v: 232 runlevel: 3 target: multi-user.target 
           Compilers: gcc: 6.3.0 alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.1.00

Benchmark #21829 - Brand: Western Digital Green