Benchmark #21855 - pibenchmarks.com

Brand: Samsung SD EVO+ (EB1QT)
C10 U1
#9 / 1,701
1,034
#1,390 / 1,701
#33 / 405
1,092
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-30 10:20:55
#21,855
1,233
+141 (+11.44%)
Anonymous
Samsung 32GB EVO Plus Class 10 Micro SDHC

Secure Digital (SD) Card Details
Samsung SD EVO+ (EB1QT)
C10 U1
27.1G
SD
Samsung
EB1QT
SDHC
3.00
0x1b
SM
3.0
10/2018
Class 10
None
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
23.2 MB/s
41.1 MB/s
40.71 MB/s
248 IOPS
3,344 IOPS
992 KB/s
13,379 KB/s
11,281 KB/s
4,312 KB/s
11,447 KB/s
2,258 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 772.1 MiB (19.4%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 540 Speed: 750 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 750 2: 750 3: 750 4: 750 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev display ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") s-diag: 582mm (22.9") Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 94 size: 521x293mm (20.5x11.5") diag: 598mm (23.5") Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 29.81 GiB used: 7.45 GiB (25.0%) ID-1: /dev/mmcblk0 model: EB1QT size: 29.81 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 27.14 GiB size: 26.59 GiB (97.97%) used: 7.40 GiB (27.8%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p7 label: root uuid: eb628db5-eb67-4f75-bf0e-c4a6848a4042 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: A080-B6F5 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p1 size: 2.39 GiB fs: vfat label: RECOVERY uuid: 9016-4EF8 ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS uuid: e67a3e21-c0bb-477b-9e99-4e5050503a20 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: Apple Aluminum Keyboard (JIS) type: Mouse,Keyboard driver: apple,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s chip ID: 05ac:0222 Device-2: 1-1.4:4 info: N/A type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 1af3:0001 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 5.2% command: xorg pid: 484 mem: 54.4 MiB (1.3%) 2: cpu: 3.2% command: htop pid: 1143 mem: 3.02 MiB (0.0%) 3: cpu: 0.6% command: [kworker/0:0-events] pid: 21744 mem: 0.00 MiB (0.0%) 4: cpu: 0.5% command: chromium-browser-v7 pid: 26234 mem: 106.4 MiB (2.7%) 5: cpu: 0.4% command: lxterminal pid: 1036 mem: 26.7 MiB (0.6%) Memory top: 5 1: mem: 192.2 MiB (4.9%) command: wolframkernel pid: 7500 cpu: 0.4% 2: mem: 136.0 MiB (3.4%) command: wolframkernel pid: 7337 cpu: 0.3% 3: mem: 126.1 MiB (3.2%) command: chromium-browser-v7 pid: 7823 cpu: 0.1% 4: mem: 106.4 MiB (2.7%) command: chromium-browser-v7 pid: 26234 cpu: 0.5% 5: mem: 99.5 MiB (2.5%) command: chromium-browser-v7 pid: 8100 cpu: 0.0% Info: Processes: 177 Uptime: 1d 57m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p7 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 772.1 MiB (19.4%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 540 
           Speed: 750 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 750 2: 750 3: 750 4: 750 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev 
           display ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") 
           s-diag: 582mm (22.9") 
           Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 94 size: 521x293mm (20.5x11.5") 
           diag: 598mm (23.5") 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 29.81 GiB used: 7.45 GiB (25.0%) 
           ID-1: /dev/mmcblk0 model: EB1QT size: 29.81 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 27.14 GiB size: 26.59 GiB (97.97%) used: 7.40 GiB (27.8%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p7 label: root 
           uuid: eb628db5-eb67-4f75-bf0e-c4a6848a4042 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: A080-B6F5 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p1 size: 2.39 GiB fs: vfat label: RECOVERY uuid: 9016-4EF8 
           ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS 
           uuid: e67a3e21-c0bb-477b-9e99-4e5050503a20 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: Apple Aluminum Keyboard (JIS) type: Mouse,Keyboard 
           driver: apple,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s chip ID: 05ac:0222 
           Device-2: 1-1.4:4 info: N/A type: Mouse driver: hid-generic,usbhid interfaces: 1 
           rev: 2.0 speed: 12 Mb/s chip ID: 1af3:0001 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 5.2% command: xorg pid: 484 mem: 54.4 MiB (1.3%) 
           2: cpu: 3.2% command: htop pid: 1143 mem: 3.02 MiB (0.0%) 
           3: cpu: 0.6% command: [kworker/0:0-events] pid: 21744 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.5% command: chromium-browser-v7 pid: 26234 mem: 106.4 MiB (2.7%) 
           5: cpu: 0.4% command: lxterminal pid: 1036 mem: 26.7 MiB (0.6%) 
           Memory top: 5 
           1: mem: 192.2 MiB (4.9%) command: wolframkernel pid: 7500 cpu: 0.4% 
           2: mem: 136.0 MiB (3.4%) command: wolframkernel pid: 7337 cpu: 0.3% 
           3: mem: 126.1 MiB (3.2%) command: chromium-browser-v7 pid: 7823 cpu: 0.1% 
           4: mem: 106.4 MiB (2.7%) command: chromium-browser-v7 pid: 26234 cpu: 0.5% 
           5: mem: 99.5 MiB (2.5%) command: chromium-browser-v7 pid: 8100 cpu: 0.0% 
Info:      Processes: 177 Uptime: 1d 57m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #21855 - Brand: Samsung SD EVO+ (EB1QT)